JOINON WALLBOX I-CON BASIC
Quick Installation Guide
Product Overview
The JOINON WALLBOX I-CON BASIC is an electric vehicle (EV) charging station manufactured by GEWISS. This guide outlines the essential steps for its installation.
The device is designed for wall mounting and features a charging cable with a connector for electric vehicles.
Installation Steps
Step 1: Unpacking and Initial Check
The process begins with unpacking the wallbox unit. A diagram shows a person holding the unit and the installation guide, indicating a QR code for additional information or digital resources.
Visual Aid: Person holding wallbox and guide, pointing to QR code.
Step 2: Component Familiarization
An exploded view of the wallbox is presented, allowing users to identify and understand the individual components of the unit before assembly or installation.
Visual Aid: Exploded view of the wallbox components.
Step 3: Wall Mounting Preparation
The wallbox unit is shown being prepared for mounting on a wall. This may involve marking positions or initial fixture placement.
Visual Aid: Wallbox unit mounted on a wall.
Step 4: Accessing Internal Compartment
The front cover of the wallbox is opened to reveal the internal compartment. This compartment houses the electrical connections and control circuitry.
Visual Aid: Wallbox unit with front cover opened, showing internal circuitry.
Step 5: Internal Wiring Connections
The wallbox is shown mounted on the wall with its internal wiring connections accessible. This step focuses on preparing the internal wiring.
Visual Aid: Wallbox unit mounted on wall, internal wiring visible through open panel.
Step 6: Top Panel Access
A view of the top of the wallbox highlights ventilation slots. An arrow indicates the direction for accessing or opening this part of the unit, likely for cable entry or maintenance.
Visual Aid: Close-up of wallbox top, showing ventilation slots and an access arrow.
Step 7: Electrical Connection Points and Safety
The internal compartment is shown open, displaying the electrical connection points. A prominent warning symbol ⚠️ is displayed near the connections, advising caution during electrical work.
Visual Aid: Wallbox interior with connections, featuring a warning symbol ⚠️.
Step 8: Power Supply Wiring
This crucial step details the electrical hookup. The internal terminal block is clearly labeled for connecting the power supply. Diagrams illustrate connections for both single-phase (L1, N, PE) and three-phase (L1, L2, L3, N, PE) power sources. The correct placement of live (L1, L2, L3), neutral (N), and protective earth (PE) wires is shown.
Visual Aid: Detailed view of the terminal block showing L1, N, PE and L1, L2, L3, N, PE connections for single-phase and three-phase power.
Document Information
Revision Date: 05/2021
Document Code: 7.55.4.541.8
