JOINON WALLBOX I-CON DLM
Quick installation guide
Brand: GEWISS
Installation Overview
This guide provides a quick overview of the installation process for the JOINON WALLBOX I-CON DLM. Please refer to the full manual for detailed instructions.
Step 1: Preparation
Illustration shows a person holding an installation manual and pointing towards a wall where the unit will be mounted. The JOINON WALLBOX I-CON DLM unit is shown nearby.
A QR code is present, likely linking to further resources or the full manual.
Step 2: Mounting Bracket and Casing
Illustrations show the components of the wallbox, including the casing and the mounting bracket, ready for assembly.
Step 3: Internal Components and Wiring
Illustrations display the internal structure of the wallbox, showing components and initial wiring preparations.
Step 4: Wall Mounting and Cable Connection
Illustrations depict the wallbox unit being mounted onto the wall and the connection of power cables.
Step 5: Final Installation
Illustration shows the completed installation of the JOINON WALLBOX I-CON DLM unit on a wall with cables connected.
Technical Details and Wiring
The following sections detail specific aspects of the unit and its electrical connections.
Unit Overview
An illustration of the JOINON WALLBOX I-CON DLM unit.
An illustration shows the unit with an arrow labeled 'A', possibly indicating airflow or a connection point.
Internal View and Safety
An illustration shows the internal view of the wallbox, featuring a prominent warning symbol ⚠️ (triangle with exclamation mark) indicating potential hazards.
The text "DC LEAK" is visible, referring to DC leakage detection.
Wiring Diagrams
Two wiring diagrams are provided:
- Single-phase connection: Shows connections for L1, N, PE (Line 1, Neutral, Protective Earth).
- Three-phase connection: Shows connections for L1, L2, L3, N, PE (Line 1, Line 2, Line 3, Neutral, Protective Earth).
The diagrams are labeled with "DLM" and indicate the terminals for these connections.
