Aerocool VX PLUS / VX PLUS RGB Power Supply User Manual
This manual provides essential information for the installation and safe operation of Aerocool VX PLUS and VX PLUS RGB series power supply units.
Safety Reminders
General Guidelines
Important Safety Precautions:
- Water Usage: Avoid using a small amount of water to prevent water loss.
- Installation: Ensure the power cord is disconnected and the PSU switch is turned OFF before installation.
- System Compatibility: Verify that the wattage and output of your PSU are sufficient for your system's requirements.
- Usage Limitations: This PSU is designed for non-industrial desktop systems according to INTEL's Desktop Platform Form Factors. Usage outside these parameters, including cryptocurrency mining, may cause overheating, malfunction, or damage and will void the warranty.
- Connector Modification: Do NOT attempt to expand connectors through adapters or other means.
- Environmental Conditions: Do NOT operate in wet or damp conditions.
- Internal Access: Do NOT open the PSU casing. The unit operates with hazardous voltages, and there are no serviceable components inside.
- Warranty Sticker: Do NOT remove the warranty sticker. Damage or removal will void your warranty.
- Warranty Policy: For details on the PSU warranty policy, please visit the official Aerocool website: www.aerocool.com.tw.
Product Specifications and Features
Model Overview
The Aerocool VX PLUS and VX PLUS RGB series offers a range of power supply units designed for reliable performance.
Key Features
- Power Output: Available in various wattages from 350W to 800W.
- Connectors: Includes standard ATX 20+4 pin, 12V 4+4 pin, SATA, PATA, and FDD connectors, with specific configurations varying by model.
- Efficiency: Designed to meet power requirements with various output ratings.
- Cooling: Features internal cooling mechanisms.
- RGB Lighting: Select models include RGB lighting for aesthetic customization.
Technical Specifications (Example for VX PLUS 350W)
Input: 230Vac, 47-63Hz
Connector Configurations (Example)
The following table illustrates typical connector configurations for different models:
| Model | 20+4pin | 12V 4+4pin | PCI-e 6pin | PCI-e 6+2pin | SATA | PATA | FDD |
|---|---|---|---|---|---|---|---|
| VX PLUS 350 | 1 | 1 | 0 | 0 | 2 | 2 | 1 |
| VX PLUS 400 | 1 | 1 | 1 | 0 | 2 | 2 | 1 |
| VX PLUS 450 | 1 | 1 | 0 | 1 | 2 | 2 | 1 |
| VX PLUS 500 | 1 | 1 | 0 | 1 | 3 | 3 | 1 |
| VX PLUS 550 | 1 | 1 | 0 | 1 | 3 | 3 | 1 |
| VX PLUS 600/VX PLUS 600 RGB | 1 | 1 | 0 | 2 | 4 | 3 | 1 |
| VX PLUS 650/VX PLUS 650 RGB | 1 | 1 | 0 | 2 | 4 | 3 | 1 |
| VX PLUS 700/VX PLUS 700 RGB | 1 | 1 | 0 | 2 | 6 | 3 | 1 |
| VX PLUS 750/VX PLUS 750 RGB | 1 | 1 | 0 | 2 | 6 | 3 | 1 |
| VX PLUS 800/VX PLUS 800 RGB | 1 | 1 | 0 | 4 | 6 | 4 | 1 |
Installation and Operation
- Power Switch: Ensure the PSU switch is set to 'O' (OFF) before connecting the power cord.
- 20+4 Pin Connector: Connect the 20+4 pin main power connector to the motherboard.
- 12V 4+4 Pin Connector: Connect the 12V 4+4 pin (or 8 pin) CPU power connector.
- PCIe Connectors: Connect PCIe 6-pin or 6+2 pin connectors to the graphics card if required.
- Peripheral Connectors: Connect SATA, PATA, or FDD connectors to your devices (e.g., SSD, HDD, DVD drive).
Troubleshooting
- No Power: Check if the power cord is securely connected and the PSU switch is ON ('I'). Verify the wall outlet is functional.
- System Not Booting: Ensure all power connectors are properly seated on the motherboard and components.
- Overheating: Ensure adequate ventilation around the PSU and that the PSU is not overloaded.
Warranty Information
For detailed warranty information and return procedures, please refer to the Aerocool official website: www.aerocool.com.tw.
AeroCool - AeroCool
