Aerocool Python PC Case Installation and User Guide

Front I/O Panel Cable Connection

This section details the connection of the front panel connectors to the motherboard. Refer to your motherboard's manual for specific pin assignments.

Front Panel Connector Layout:

The diagram shows the standard front panel header layout on a motherboard, typically including:

POWER SW (Power Switch)
RESET SW (Reset Switch)
HDD LED (Hard Drive Activity LED)
POWER LED+ / POWER LED- (Power On LED)
HD AUDIO (High Definition Audio Connector)
USB (Universal Serial Bus Connector)
F_PANEL (Front Panel Header)

Note: Pin configurations may vary by motherboard manufacturer.

Accessory Bag Contents

The accessory bag typically contains the following hardware for installation:

SSD Screw
ODD Screw
MB Screw
HDD Screw
PSU Screw
PCI Screw
MB Standoff
Cable tie

How to Install Guide

Follow these steps for installing components into the Aerocool Python PC case.

1. Install Motherboard

Description: This step illustrates placing the motherboard into the PC case, aligning it with the standoffs, and securing it with screws.

2. Install PSU

Description: This shows the process of mounting the Power Supply Unit (PSU) into its designated bay within the case.

3. Install Add-on Card

Description: This step demonstrates inserting an expansion card, such as a graphics card or sound card, into the appropriate expansion slot on the motherboard.

4. Install 3.5" HDD x 2

Description: This illustrates mounting two 3.5-inch Hard Disk Drives (HDDs) into the case's drive bays.

5. Install 2.5" SSD x 3

Description: This shows installing up to three 2.5-inch Solid State Drives (SSDs) into their designated mounting locations.

6. Install TOP Fans

Description: This step demonstrates installing fans into the top mounting points of the PC case.

7a. Install Front Radiator

Description: This illustrates mounting a radiator at the front of the PC case.

7b. Install Top Radiator

Description: This illustrates mounting a radiator at the top of the PC case.

RGB Fan Hub Installation

This section provides instructions for connecting the RGB Fan Hub to manage RGB lighting and fan speeds.

The hub features several connection points:

Molex Connector (A): Connects the hub (B) to your power supply unit (PSU) for power.
3-Pin Motherboard Connector (C): Used to connect the hub (D) to your motherboard's addressable RGB header.
- Use the larger connector (E) for compatibility with Asus Aura Sync / MSI Mystic Light Sync.
- Use the smaller connector (F) for compatibility with Gigabyte RGB Fusion.
2-Pin LED/RGB SW Connector (G): Connect this to the hub for motherboards with non-addressable RGB headers.
RGB 5V Fan Connectors (H): Connect your addressable RGB fans to these ports on the hub.

The hub supports up to 60 different LED Lighting Modes.

Note: Specifications may vary depending on your region. Contact your local retailer for more information.

	Aerocool Streak PC Case Installation Guide and Manual Comprehensive installation guide for the Aerocool Streak Miditower PC case. Learn how to install your motherboard, PSU, storage drives, expansion cards, and manage front panel connections.
	AeroCool FLO Computer Case Installation Guide Comprehensive guide for installing components into the AeroCool FLO PC case, covering motherboard, PSU, storage drives, expansion cards, and cooling solutions.
	AeroCool D502A Mid Tower Case Installation and Connection Guide Detailed installation and connection guide for the AeroCool D502A Mid Tower Case, covering component installation, front panel I/O, and RGB fan hub setup for various motherboard sync technologies.
	AERO-500G RGB PC Case Installation Guide Comprehensive installation guide for the AERO-500G RGB PC case, detailing component mounting and front panel connections. Includes instructions in multiple languages.
	AeroCool Aero One PC Case Installation Guide and RGB Fan Hub Setup Comprehensive guide for installing the AeroCool Aero One PC case, including motherboard, PSU, storage, and cooling setup. Features detailed instructions for the H66C RGB Fan Hub connection with various motherboard RGB ecosystems.
	Aerocool AirHawk / NightHawk PC Case Installation Guide A comprehensive guide for installing components into the Aerocool AirHawk and NightHawk PC cases, covering motherboard, PSU, storage drives, expansion cards, and cooling solutions.
	Aerocool Aero-300 PC Case Installation Guide A comprehensive guide for installing components into the Aerocool Aero-300 PC case, covering PSU, motherboard, ODD, HDD, SSD, and fan installations.
	Aerocool CS-107 Mini Tower Case Installation Guide Comprehensive installation guide for the Aerocool CS-107 Mini Tower PC Case. Learn how to install your motherboard, power supply unit (PSU), storage drives (SSD/HDD), expansion cards, fans, and radiators. Includes front panel I/O setup and bag contents.

Aerocool Python PC Case Installation Guide