Aerocool Mirage Gold Power Supply User Manual
Safety Reminders
Please read the following safety reminders carefully before using the power supply unit.
- This power supply unit is designed for use with computers and other electronic devices.
- Ensure that the power supply unit is properly grounded to prevent electrical shock.
- Do not expose the power supply unit to water or moisture.
- Do not operate the power supply unit in extreme temperatures.
- Do not attempt to open or repair the power supply unit yourself.
- Disconnect the power supply unit from the mains before cleaning.
- Keep the power supply unit away from children.
General Precautions
The following precautions should be observed to ensure safe operation:
- Ensure the power supply unit is installed in a well-ventilated area.
- Do not block the air vents of the power supply unit.
- Use only the provided power cord.
- Do not overload the power supply unit. Refer to the specifications for maximum load capacity.
- Avoid static discharge when handling the power supply unit. Ground yourself before touching the unit.
Electrical Safety
- The power supply unit is designed to operate within a specific voltage range. Ensure your mains voltage is compatible.
- Do not connect the power supply unit to a damaged power outlet.
- In case of any malfunction, immediately disconnect the power supply unit from the mains.
Disposal
Dispose of this product in accordance with local regulations for electronic waste.
Product Overview
The Aerocool Mirage Gold series offers high-efficiency power supply units designed to meet the demands of modern computer systems. These units are built with high-quality components to ensure stable and reliable performance.
Key Features
- High efficiency (80 PLUS Gold certified)
- Modular cable design for improved airflow and easier installation
- Quiet operation with a 120mm fan
- Comprehensive protection features (OCP, OVP, UVP, SCP, OPP, OTP)
- Compact design for easy integration into various PC cases
Specifications
The following table provides the specifications for the Aerocool Mirage Gold series:
| Model | Wattage | Efficiency | Form Factor | Connectors |
|---|---|---|---|---|
| MIRAGE GOLD 650W | 650W | 80 PLUS Gold | ATX | Modular |
| MIRAGE GOLD 750W | 750W | 80 PLUS Gold | ATX | Modular |
| MIRAGE GOLD 850W | 850W | 80 PLUS Gold | ATX | Modular |
Protection Features
- Over Current Protection (OCP)
- Over Voltage Protection (OVP)
- Under Voltage Protection (UVP)
- Short Circuit Protection (SCP)
- Over Power Protection (OPP)
- Over Temperature Protection (OTP)
Installation Guide
Follow these steps to install the power supply unit:
- Ensure the computer is powered off and unplugged from the mains.
- Open the computer case.
- Mount the power supply unit in the designated bay using the provided screws.
- Connect the necessary power cables to the motherboard, CPU, graphics card, and other components.
- Connect the power cord to the power supply unit and the wall outlet.
- Close the computer case.
Diagram Description: The diagram shows the power supply unit being mounted into a computer case and the connection of various cables to the motherboard and other components.
Warranty Information
Aerocool provides a limited warranty for its power supply units. Please refer to the warranty card included with your product for detailed terms and conditions.
