IKEA MALM Dressing Table

Important Safety Information

[Warning] WARNING

Serious or fatal crushing injuries can occur from furniture tip-over.

ALWAYS secure this furniture to the wall using tip-over restraints.

To further reduce the risk of serious injury and death from tip-overs:

• Place heaviest items in the lower drawer.
• Do not set TVs or other heavy objects on top of this product.
• Never let children climb or hang on drawers, doors, or shelves.

Ensure you use appropriate wall fixings for your wall type. If unsure, seek professional advice.

Parts Included

• Large screws (e.g., 114334): 4x
• Medium screws (e.g., 110519): 4x
• Small screws (e.g., 109560, 109558): Multiple
• Wooden dowels (e.g., 101353, 101345): Multiple
• Cam bolts (e.g., 114334, 122998, 118331): Multiple
• Cam locks (e.g., 113453, 110630): Multiple
• Drawer slides (118250): 1 pair
• Wall mounting brackets (106989): 2x
• Screws for wall mounting (109049): 2x
• Wall plugs (121714): 2x
• Support brackets (10003193): 3x
• Other various small parts and fixings as shown in diagrams.

Assembly Steps

Step 1: Prepare Tabletop and Side Panels

Insert wooden dowels (113453) and cam bolts (114334) into the designated holes on the tabletop. Attach drawer slides (118250) to the inner sides of the side panels using screws (100349).

Step 2: Assemble Main Frame Base

Insert dowels (101353) into the top edge of the side panels. Connect the side panels to the tabletop. Attach the bottom support panel to the side panels using cam bolts (122998) and cam locks (113453). Attach the second side panel to the base assembly using screws (153548).

Step 3: Attach Wall Bracket

Attach the wall mounting bracket (106989) to the back edge of the unit using screws (109049, 100823) and wall plugs (121714) if needed for your wall type. [Hand] indicates securing to the wall.

Step 4: Attach Top Surface

Place the top surface onto the assembled base structure. Secure it using brackets (10003193) and screws.

Step 5: Prepare Drawer Components

Insert dowels (101345) into drawer sides. Insert cam bolts (118331) into the drawer front.

Step 6: Assemble Drawer Box

Attach drawer sides to the drawer front and back panels using screws (100349). Insert the drawer bottom into the grooves. Secure the drawer bottom to the box using screws (110519). Attach the drawer front to the box using screws (110678).

Step 7: Attach Drawer Runners

Attach the drawer runners to the drawer sides using screws (109048, 100823) and cam locks (110630) with cam bolts (118331). Secure the runners to the drawer box using screws (109558).

Step 8: Insert Drawer

Slide the completed drawer into the main unit, aligning the runners. [Arrow] indicates insertion direction.

Step 9: Final Wall Securing

Secure the unit to the wall using the provided wall bracket and appropriate fixings for your wall type. This is a critical safety step to prevent tip-over.