IKEA MALM Dressing Table Assembly Instructions

Important Safety Information

WARNING: Serious or fatal crushing injuries can occur from furniture tip-over. ALWAYS secure this furniture to the wall using the provided tip-over restraints.

To further reduce the risk of serious injury and death from tip-overs:

Place heaviest items in the lower drawer.
Do not set TVs or other heavy objects on top of this product.
Never let children climb or hang on drawers, doors, or shelves.

IKEA of Sweden

Parts and Hardware List

Identify all parts before assembly. Refer to the diagrams for visual confirmation.

Main Components:
Side Panels (x2)
Base Panel (x1)
Top Panel (Glass) (x1)
Drawer Front (x1)
Drawer Sides (x2)
Drawer Back (x1)
Drawer Base (x1)
Drawer Slide Runners (for unit) (x2)
Drawer Slides (for unit) (x2)
Glass Top Support Brackets (x3) - Part #10003193
Wall Mounting Brackets (x2) - Part #106989
Top Support Pieces (x4)

Hardware & Fittings:
Large Screws (for base/frame assembly) (x4) - Part #114334
Drawer Assembly Screws (x4) - Part #110519
Small Screws (for brackets/runners) (x3) - Part #109560
Wall Mounting Screws (long) (x2) - Part #109048
Wall Mounting Screws (medium) (x2) - Part #109049
Drawer Slide Screws (x2) - Part #109558
Wall Plugs (x2) - Part #121714
Dowels (large) (x2) - Part #101353
Dowels (small) (x2) - Part #101345
Cam Lock Pins (x2) - Part #118331
Cam Locks (x2) - Part #110630
Drawer Slide Components (x2) - Part #118250
Drawer Slide Runners (x2) - Part #100349
Drawer Runner Clips (x4) - Part #122998
Drawer Runners (metal, for drawer) (x4) - Part #110678
Handles (x4) - Part #153548
Nuts (for handles) (x4) - Part #114254
Washers (for wall mounting) (x2) - Part #100823
Top Support Pieces (x4)
Tools:
Wrench (x1) - Part #113453
Hammer
Screwdrivers (Phillips, Flathead)
Drill with bits (Ø 8 mm, Ø 3 mm)

Assembly Steps

Step 1: Attach Base Screws

Insert four large screws (114334) into the base panel and partially screw them in using the wrench (113453).

Step 2: Attach Drawer Slide Runners

Attach the drawer slide runners (118250, 100349) to the inside of the two side panels using screws (100349).

Step 3: Connect Side Panels to Base

Insert two large dowels (101353) into the top edge of the base panel. Align the side panels with the dowels and secure them to the base.

Step 4: Attach Drawer Runner Clips

Attach the drawer runner clips (122998) to the side panels using screws (114254) and cam locks (113453).

Step 5: Secure Top Support Pieces

Place the four top support pieces (153548) onto the top edges of the side panels and tap them into place with a hammer.

Step 6: Attach Wall Mounting Brackets to Unit

Attach the two wall mounting brackets (106989) to the top rear edge of the unit using screws (109049) and washers (100823).

Step 7: Place Glass Top

Carefully place the glass top (10066373, 10087006) onto the assembled unit. Ensure it is correctly aligned.

Step 8: Attach Glass Top Support Brackets

Attach three glass top support brackets (10003193) to the underside of the glass top, aligning them with the pre-drilled holes.

Step 9: Secure Glass Top

Secure the glass top by screwing through the support brackets (10003193) into the unit using small screws (109560).

Step 10: Prepare Wall for Mounting

Attach the two wall mounting brackets to the wall at the desired height using wall mounting screws (109048) and wall plugs (121714) if needed. Ensure they are level and spaced correctly.

Step 11: Mark Wall for Mounting

Position the unit against the wall and mark the screw hole positions for the wall brackets.

Step 12: Wall Mounting Guidance

This section provides guidance on selecting appropriate wall fixings (screws and plugs) based on wall type (solid, hollow, wood). Always use fixings suitable for your wall type. If unsure, seek professional advice.

Step 13: Secure Unit to Wall

Drill holes in the wall at the marked positions. Insert wall plugs (121714) if necessary. Align the unit's wall mounting brackets with the wall-mounted brackets and fasten the unit to the wall using screws (109048) and washers (100823).

Step 14: Attach Drawer Cam Lock Pins

Attach two cam lock pins (118331) to the drawer front panel.

Step 15: Insert Drawer Dowels

Insert two small dowels (101345) into the side panels of the drawer.

Step 16: Attach Drawer Cam Locks

Attach two cam locks (110630) to the drawer side panels.

Step 17: Assemble Drawer Front

Connect the drawer front panel to the drawer sides, aligning dowels and cam lock pins. Secure by turning the cam locks.

Step 18: Attach Drawer Bottom Support

Attach the drawer bottom support (110519) to the drawer assembly using screws and a hammer.

Step 19: Attach Drawer Runners

Attach the four drawer runners (110678) to the outer sides of the drawer assembly using screws.

Step 20: Insert Drawer

Carefully slide the assembled drawer into the unit, aligning the drawer runners with the unit's slide components.

Step 21: Secure Drawer Slides

Secure the drawer slides to the unit using screws (109558).

Wall Mounting Guidance

The supplied screws and plugs are suitable for most solid (A) and hollow (B) walls. For solid wood (C), use screws without plugs. If you are uncertain about your wall type or the correct fixings, seek professional advice.

Wall Type A: Solid walls (e.g., concrete, brick). Use screws and plugs.

Wall Type B: Hollow walls (e.g., plasterboard). Use screws and plugs suitable for hollow walls.

Wall Type C: Solid wood. Use screws without plugs.

Always ensure the furniture is securely fastened to the wall to prevent tip-over accidents.

	IKEA MALM Dressing Table Assembly Instructions Comprehensive, step-by-step assembly guide for the IKEA MALM dressing table. Includes essential safety warnings, a detailed parts list, and instructions for wall mounting to prevent tip-over accidents. Optimized for clarity and SEO.
	IKEA MALM Dressing Table Assembly Instructions Comprehensive assembly guide for the IKEA MALM dressing table, including essential safety warnings, a detailed parts list, and step-by-step instructions for secure installation.
	IKEA MALM Console Table Assembly Instructions and Safety Guide This document provides assembly instructions and critical safety information for the IKEA MALM console table. It includes detailed steps for putting the furniture together and essential advice on preventing tip-over accidents by securing the unit to the wall.
	IKEA MALM Desk Assembly Instructions and Safety Guide This document provides comprehensive assembly instructions and critical safety warnings for the IKEA MALM desk. It details how to securely attach the furniture to the wall to prevent tip-over accidents, along with step-by-step guidance for building the unit.
	IKEA MALM Desk Assembly Instructions Step-by-step assembly guide for the IKEA MALM desk, including essential safety warnings regarding furniture tip-over and wall anchoring. This document provides detailed instructions for assembling the MALM desk.
	IKEA MALM Dressing Table Assembly Guide Step-by-step assembly instructions for the IKEA MALM dressing table. Includes essential safety warnings and wall mounting guidance. Learn how to build your MALM furniture safely and correctly.
	IKEA MALM Dressing Table Assembly Instructions and Safety Guide This document provides assembly instructions and essential safety warnings for the IKEA MALM dressing table. It includes guidance on securing the furniture to the wall to prevent tip-over accidents and detailed steps for assembly.
	MALM Dressing Table Assembly Instructions Step-by-step assembly instructions for the IKEA MALM dressing table, including safety warnings and parts list.