Philips Bustan Outdoor Wall Light

Package Contents

Included:

• Main light fixture
• Mounting hardware

Exclusions (Tools Required):

• Drill
• Screwdriver (Phillips and flathead)
• Pencil
• Utility knife
• Wall anchors and screws (may vary based on wall type)

Product Information and Symbols

IP44 Rating: Protected against solid objects larger than 1mm and water splashes from any direction.

LED Technology: Energy-efficient lighting.

Dimensions: 3/8" (approx. 8mm) mounting hole size indicated.

Electrical Safety: Symbol indicating proper electrical connection is required. Symbol indicating no direct connection to mains without a suitable driver or transformer.

Light Source: Symbol indicating the light source is not replaceable.

Disposal: Symbol indicating the product should not be disposed of with household waste.

Dimming/Sensor Compatibility: Symbols indicating potential compatibility with dimmers or sensors.

Energy Efficiency Class: F

Installation Instructions

Step 1: Preparation

Turn off power at the main circuit breaker before starting installation. [Power Off Symbol]

Step 2: Mounting Bracket Installation

Diagram Description: Shows how to attach the mounting bracket to the wall using screws and possibly wall anchors. The bracket is secured to the main body of the light fixture.

Materials: Inox, Stainless Steel, Inoxydable, Edelstahl, Roestvrij Staal, Acero Inoxidable (Indicates corrosion-resistant materials used).

Step 3: Wiring the Fixture

Diagram Description: Illustrates connecting the wires from the power source to the terminals inside the fixture's junction box. Ensure correct polarity (Live, Neutral, Ground). The diagram shows a junction box with screw terminals. Wires are stripped and inserted into the terminals, then secured with screws. A cable gland is used to seal the cable entry point.

Step 4: Securing the Fixture

Diagram Description: Shows the fixture being attached to the mounting bracket. Screws are used to secure the fixture in place. The diagram indicates the 'TOP' orientation for the fixture.

Step 5: Final Connections and Power On

Diagram Description: Depicts turning the power back on at the circuit breaker. [Power On Symbol]

Operation

The Philips Bustan is designed for outdoor wall mounting. Ensure the fixture is installed according to the instructions to maintain its IP44 rating.

Manufacturer Information

Signify I.B.R.S. / C.C.R.I. Numéro 10461 5600 VB Eindhoven, the Netherlands 00800-74454775

www.philips.com/lighting

Product Codes: 16483/**/P0, 16483/**/P3

Article Number: 4404 029 05623

© 2021 Signify Holding. All rights reserved.

Last update: 04/2021