Philips Arbour Outdoor Wall Light with Motion Sensor User Manual

Introduction

This user manual provides instructions for the Philips Arbour outdoor wall light, a motion-activated luminaire designed for external use. It details installation, setup, and operational features. The manual is available in multiple languages including English, German, French, Spanish, Portuguese, Italian, and Dutch.

Product Overview

The Philips Arbour is an outdoor wall-mounted light fixture featuring an integrated motion and light sensor. It is designed to provide illumination upon detecting movement and ambient light conditions. The fixture is constructed from stainless steel.

Specifications

• IP Rating: IP44 (protected against solid objects >1mm and water spray from any direction)
• Power Supply: 230V
• Energy Efficiency Rating: E
• Detection Angle: 110°
• Detection Range: 1.8m (minimum) to 4m (maximum)
• Detection Distance: 0m to 10m
• Light Sensitivity Adjustment: MIN 30 LUX to MAX 200 LUX
• Time Delay Adjustment: MIN 5 SEC to MAX 12 MIN (approximate)
• Cable Entry Size: 3/8" (approx. 9.5mm)
• Cable Diameter: 8mm
• Material: Stainless Steel (Inox, Inoxydable, Edelstahl, Roestvrij Staal, Acero Inoxidable)

What's Included and Excluded

Included:

• User Manual [Included Manual A]
• User Manual [Included Manual B]

Excluded (Tools Required):

• Drill [Drill]
• Screws and Wall Plugs [Screws and Wall Plugs]
• Pencil [Pencil]
• Utility Knife [Utility Knife]
• Flathead Screwdriver [Flathead Screwdriver]
• Phillips Screwdriver [Phillips Screwdriver]

Installation Instructions

Important Safety Note: Before starting installation, ensure the power supply is turned OFF at the main circuit breaker [Circuit Breaker Panel] by switching it to the OFF position [Switch to OFF Position].

1. Preparation:

   • Identify the mounting location.
   • Mark drilling points using a pencil [Pencil].
   • Drill holes and insert wall plugs [Screws and Wall Plugs] if required.

2. Wiring:

   • Connect the electrical wires [Electrical Wires] to the wire connector block [Wire Connector Block]. The diagram shows a block with three terminals.

3. Mounting the Fixture:

   • Attach the mounting bracket to the wall using appropriate screws [Mounting Screws].
   • Connect the fixture to the mounting bracket. The diagram shows a sequence of attaching the sensor unit and then the main housing. Ensure the "TOP" indicator is oriented correctly [Top Indicator].

4. Final Connection and Power Up:

   • Complete any internal wiring connections within the fixture if necessary.
   • Secure the fixture housing.
   • Turn the power supply ON at the circuit breaker [Circuit Breaker Panel] by switching it to the ON position [Switch to ON Position].

Note: The diagrams illustrate the mounting and wiring process. The "Excl." section indicates tools not provided with the product.

Operation and Settings

The Philips Arbour features adjustable settings for motion detection, light sensitivity, and time delay.

Turning the Light On/Off:

The light operates automatically based on motion and ambient light. The main power switch [Power Switch ON] on the circuit breaker controls the overall power supply.

Adjusting Settings:

• Light Sensor (Dusk-to-Dawn):

  Use the dial with sun and moon icons [Light Sensor Adjustment Dial] to set the ambient light level at which the motion sensor becomes active. Settings range from daylight (sun icon) to darkness (moon icon).

• Time Delay:

  Use the dial with a clock/timer icon [Time Delay Adjustment Dial] to set how long the light stays on after motion is no longer detected. The duration can be set from approximately 5 seconds to 12 minutes. The diagram indicates a time delay of approximately 30 seconds [Time Delay: Approximately 30 seconds].

• Motion Sensitivity:

  Use the dial with a person icon [Motion Sensitivity Adjustment Dial] to adjust the sensitivity of the motion detector. This determines how easily the sensor detects movement within its detection area [Motion Detection Area].

The diagrams on page 5 illustrate these adjustments. The 'a' section shows the unit powered ON. The 'b' section illustrates the time delay function. The 'c' section shows the adjustment dials.

Manufacturer Information

Signify Holding

I.B.R.S. / C.C.R.I. Numéro 10461

5600 VB Eindhoven, the Netherlands

Customer Service: 00800-74454775

Website: www.philips.com/lighting

© 2021 Signify Holding. All rights reserved.

Document Reference: 16461/**/16, 16461/**/P3, 4404 029 00763. Last update: 06/2021.