Wow Transforming RC
Model: F33521-0000-ISH-EN01A
Age Recommendation: 8+
Important! Problems?
[STOP-SIGN] For customer support Please contact us at:
cs@jadatoys.com or 1-800-679-5232
Hours: 9:00 AM to 6:00 PM Pacific Time, Monday - Friday
Website: www.jadatoys.com
Warranty Information
U.S.A. & Canada 30-Day Limited Warranty
Jada Toys, Inc. warrants to the original consumer purchaser that this product will be free of defects in material and workmanship for thirty (30) days from the date of purchase. Jada Toys will repair or replace the product, at our sole discretion, in the event of such a defect within the warranty period.
For warranty service, call 1-800-679-JADA (5232) (valid only in U.S.A. and Canada). Hours: 9:00 AM - 6:00 PM Pacific Time; Monday - Friday.
Address for Returns: Consumer Relations, Jada Toys, Inc., 938 Hatcher Ave., City of Industry, CA 91748, USA.
This warranty is exclusive and made in lieu of any express or implied warranty. It provides specific legal rights, which may vary by state.
Regulatory Information
Industry Canada Warning
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to two conditions: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation.
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. If interference occurs, try measures like reorienting the antenna, increasing separation, or connecting to a different circuit.
Getting Started
Battery Installation
Vehicle Battery Installation (Diagram 1)
The vehicle requires 4 (four) standard "AA" alkaline batteries. Ensure the vehicle's ON/OFF switch is in the "OFF" position. Use a screwdriver to open the battery compartment door underneath the vehicle. Remove old batteries (if any) and dispose of them properly. Insert the 4 "AA" batteries, observing the correct polarity (+/-) as indicated inside the compartment. Securely close and lock the battery compartment door.
Controller Battery Installation (Diagram 2)
The transmitter controller requires 2 (two) standard "AAA" batteries. Press the lock button with a screwdriver and slide the battery compartment door open. Remove old batteries (if any) and dispose of them properly. Insert the 2 "AAA" batteries, observing the correct polarity (+/-) as indicated inside the compartment. Replace the battery compartment door.
Remote Control Layout
The remote control features the following functions:
- ON / OFF Switch: Controls power to the vehicle.
- Convert Button: Initiates vehicle transformation.
- Forward Button: Moves the vehicle forward.
- Reverse Button: Moves the vehicle backward.
- Left / Right Buttons: Steers the vehicle left or right.
- Power Indicator Light: Shows the status of the controller's power.
- Audio Button: Activates sound effects.
How to Play
- Turn the vehicle ON.
- Press any button on the transmitter controller within 15 seconds for pairing. The controller's LED will blink during pairing.
- Once pairing is successful, the controller's LED will stop blinking and remain on.
- If pairing is unsuccessful, turn the vehicle OFF, reinstall the controller batteries, and try again.
Note: If the controller LED blinks or its brightness decreases, replace the batteries. For multiple vehicles, pair only one controller to one vehicle at a time to avoid interference.
Troubleshooting
| Problem | Solution |
|---|---|
| Vehicle will not START | 1. Ensure the power switch is ON. 2. Check battery polarity (+/-). 3. Replace or recharge batteries. |
| Vehicle does not respond to controls | 1. Replace controller batteries. 2. Bring controller closer to the vehicle (out of range). 3. Move away from sources of electrical interference. |
| Vehicle does not move | 1. Stop operation, switch off power, and rest the vehicle for a few minutes. 2. Check battery placement in the vehicle; they may have shifted. |
| Vehicle does not respond properly | Major reason is out of range. Bring controller closer. If problem persists, replace controller batteries and restart the vehicle. |
| Transmitter controller does not work | The controller light is off; its battery is drained. Replace the controller battery. |
Safety and Care
Consumer Information
Contents: 1 x Vehicle, 1 x Transmitter Controller.
Safety Tips:
- Do not operate the vehicle in water, snow, sand, grass, or wet/muddy surfaces, as electronics can get wet and cause burns.
- Never play with the vehicle on streets.
- Do not pick up the vehicle while it is in motion.
- Always place the vehicle gently on the floor; never throw it.
- Avoid collisions with walls, hard objects, or people/animals.
- Keep fingers, hair, and loose clothing away from tires and wheel hubs.
- Remove controller batteries when not in use to prevent accidental operation.
- Do not connect to other power supplies or insert wires into electrical outlets.
- Rest the vehicle for at least 5 minutes after every 15 minutes of operation.
- Stay clear of obstructions and hazards to avoid injury and damage.
Battery Safety Information
- Use only Alkaline type batteries.
- Do not mix battery types (alkaline, carbon-zinc, rechargeable).
- Remove batteries for long periods of non-use to prevent leakage.
- Dispose of batteries safely; do not put them in fire as they may explode or leak.
- Rechargeable batteries must be removed before charging and charged by an adult only.
- Non-rechargeable batteries are not to be recharged.
- Do not mix new and used batteries or different types.
- Insert batteries with correct polarity.
- Remove exhausted batteries.
- Do not short-circuit supply terminals.
Quick Tips
- Reduced power/performance indicates it's time for fresh batteries. Running time varies with driving style.
- Radio interference can affect operation. Avoid other R/C vehicles on the same frequency, electrical wires, large buildings, or CB radios.
- Store the vehicle away from heat and direct sunlight. Always turn switches OFF and remove batteries for storage.
- Automatic resets may indicate weak batteries.
- Performs best on flat, smooth surfaces.
Cleaning Instruction
Remove batteries first. Wipe toy clean with a damp cloth. Wipe dry. DO NOT IMMERSE IN WATER or use chemicals. Let the toy dry completely before reinserting batteries.
Instruction for Disposal of Waste
Recycle or dispose of batteries and electronic toys according to local waste management guidelines. Contact local officials for information.
WARNING: This toy produces flashes that may trigger epilepsy in sensitised individuals.
Licensing and Manufacturer
We reserve the right to improve or amend product specifications. Colors may vary. Jada oval mark is a registered trademark of Jada Toys, Inc.
Licensed By: Hasbro, Transformers (Authentic).
HASBRO and its logo, TRANSFORMERS and all related characters are trademarks of Hasbro and are used with permission. © 2022 Hasbro. All Rights Reserved. © 2022 Paramount Pictures Corporation. All Rights Reserved.
© 2022 JADA TOYS, INC. CITY OF INDUSTRY, CA 91748, USA
MADE IN CHINA
The product uses 2.4GHz remote control technology.
