Back to the Future Time Machine R/C

Charging the Vehicle

OFF ON / CHARGE Switch: Ensure the switch is in the ON/CHARGE position.

Built-in USB Charging Cable: Open the chassis door and pull out the integrated USB charging cable.

Charging Process:

1. Plug the USB cable into a certified USB port.
2. The light on the chassis will slowly fade in and out to indicate charging.
3. Once charging is complete, the light will stop fading and remain ON.
4. Charging times vary depending on the USB port used.

Battery: Built-in non-removable rechargeable battery.

Charging Tips:

• The included rechargeable battery is not charged prior to shipment and must be charged before first use.
• Do not charge or store the vehicle in extreme temperatures (above 104ºF/40ºC or below 14ºF/-10ºC) or high humidity (beyond 60±25%).
• Do not charge or store the vehicle in a parked car under the sun.
• Charge in an isolated area away from flammable materials.
• Do not expose to direct sunlight.
• Do not recharge if the toy is hot; allow it to cool first.
• Keep the USB cable inside the chassis box when not in use.
• Adult supervision is required when charging.

Steering Alignment

If the vehicle does not run straight forward, adjust the steering alignment lever located on the underside of the vehicle.

Visual Description: The steering alignment lever is found on the underside of the vehicle, near the front axle. A "Steering Dial" is also mentioned for adjustment.

How to Play

1. Turn the vehicle ON.
2. Press any button on the transmitter controller within 15 seconds for pairing.
3. The LED on the controller will blink during pairing.
4. Once pairing is successful, the LED will stop blinking and stay on.
5. If pairing fails, turn the vehicle OFF, remove and reinsert the controller batteries, and try again.

LED Indicators:

• Controller LED blinking or dim: Replace controller batteries.
• Vehicle LED blinking or dim: Turn vehicle OFF and recharge the battery.

Playing with Multiple Vehicles: Pair only one controller to one vehicle at a time to avoid interference.

Turbo Boost Feature

Press the Turbo Button to increase the vehicle's speed. The controller light will flash quickly when Turbo Boost is active. Release the button to return to normal speed.

Features

• Up to 20 minutes playtime
• 90 minutes quick charge
• Full function RC
• Custom rims and graphics
• Turbo boost

Consumer Information & Safety Tips

Note to Adults: Review all operating instructions and safety tips with your child to ensure safe and fun play.

Safety Tips:

• Toy surface may become hot if electronics get wet. DO NOT operate near or in water, snow, sand, grass, or wet/muddy surfaces.
• Never play on streets.
• Do not pick up the vehicle while in motion.
• Place the car gently on the floor by hand; never throw it.
• Avoid collisions with walls, hard objects, or people/animals.
• Keep fingers, hair, and loose clothing away from tires and wheel hubs.
• Remove all batteries from the controller when not in use to prevent accidental operation.
• Do not connect this toy with other power supplies or insert wires into electrical outlets.
• Rest the vehicle for at least 5 minutes after every 15 minutes of operation.
• Stay clear of obstructions and hazards to avoid injury and damage.
• This toy is not intended for children under 3 years old.
• Power supply for charging should be 5V 1A.

Controller Battery Installation:

1. Use a screwdriver (not included) to open the battery compartment door.
2. Insert 2 "AAA" batteries, observing correct polarity (+/-).
3. Replace and secure the battery compartment door.

Battery Safety Information (Controller):

• Do not mix battery types (alkaline, standard, rechargeable).
• Remove controller batteries if the R/C will not be used for a long period.
• Dispose of batteries safely; do not dispose of in fire.
• Do not mix old and new batteries or different types of batteries.
• Ensure correct polarity when inserting batteries.
• Remove exhausted batteries.
• Do not short-circuit terminals.

Built-in Battery Safety Information (Vehicle):

• The vehicle includes a non-replaceable battery. Do not open, disassemble, or alter the vehicle.
• The built-in USB adapter is permanently attached. Connect only to certified USB ports.
• Adult supervision is required for charging.
• Do not drop or subject to strong impacts.
• Do not allow batteries to get wet.
• In case of leakage or explosion, use sand or a chemical fire extinguisher.
• Routine examination for damage to the plug, enclosure, and other parts is recommended. Do not use if damaged.

Troubleshooting

Quick Tips

• When your vehicle starts to lose power, it may lose function or performance; it's time to recharge.
• Radio interference can cause abnormal operation. Avoid areas with other R/C vehicles on the same frequency, electrical wires, large buildings, or CB radios.
• Point your transmitter controller antenna up, not down toward your vehicle.
• Do not store your vehicle near heat or in direct sunlight. Always turn the switch to the OFF position when not in use.

Cleaning Instruction

Wipe any dirt from the toy with a moist tissue. Disconnect from power supply before cleaning. DO NOT IMMERSE IN WATER and DO NOT CLEAN WITH ANY CHEMICALS. Let fully dry before use.

Disposal of Waste

Recycle or dispose of batteries and electronic toys according to local waste management guidelines. Contact local authorities for recycling information.

Warranty Information

30-Day Limited Warranty (U.S.A. & Canada)

Jada Toys, Inc. warrants this product to be free of defects in material and workmanship for thirty (30) days from the date of purchase.

Customer Support:

Phone: 1-800-679-5232 (Monday – Friday, 8:30 am to 5:30 pm Pacific Time)

Email: cs@jadatoys.com

This warranty is exclusive and is made in lieu of any express or implied warranty. It gives you specific legal rights; other rights may vary by state.

Important Safety Notices

Industry Canada Warning: This device complies with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to two conditions: no interference, and acceptance of any interference. Antenna type and gain must be approved by Industry Canada. This equipment complies with IC CNR-102 radiation exposure limits.

FCC Warning: This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: no harmful interference, and acceptance of received interference. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, providing reasonable protection against harmful interference in a residential installation.