Jada Toys Hyper Chargers 1/16 RC
Product Details:
- Model: Hyper Chargers - 1/16 RC
- Size: 420mm x 287mm
- Configuration: Front 1C + Back 1C
Important Safety Information
General Precautions:
- Read all instructions carefully before use.
- This product is not a toy and is intended for ages 6 and up.
- Adult supervision is recommended for children.
- Keep away from heat, sparks, and open flames.
- Do not disassemble or modify the product.
- Avoid exposure to water or extreme temperatures.
Battery Safety:
- Use only the recommended battery type.
- Do not mix old and new batteries.
- Remove batteries if the product will not be used for a long time.
- Dispose of batteries properly according to local regulations.
Product Overview and Components
The Hyper Chargers 1/16 RC is a high-performance remote control car designed for exciting play. Key components include:
- RC Car Body: The main chassis and shell of the vehicle.
- Remote Controller: Used to steer and control the car's movements.
- Battery Pack: Powers the RC car.
- Charger: For recharging the battery pack.
Diagram Description:
The product packaging and manual may contain diagrams illustrating the placement of components, battery installation, and controller functions. These diagrams typically show:
- The RC car with labeled parts such as wheels, body, and power switch.
- The remote controller with its antenna, steering wheel, throttle trigger, and power button.
- Battery compartment locations on both the car and the controller.
- Charging port and indicator lights on the charger.
Operating Instructions
Setup:
- Install batteries into the remote controller.
- Charge the battery pack for the RC car using the provided charger.
- Ensure the car's power switch is turned OFF before charging or connecting the battery.
Operation:
- Turn ON the power switch on the RC car.
- Turn ON the remote controller.
- The car should now respond to the controller's commands.
- Use the steering wheel to turn left or right.
- Use the throttle trigger to accelerate forward or reverse.
- Turn OFF both the car and the controller after use.
Troubleshooting
Issue: Car does not move.
- Check if batteries are correctly installed and charged.
- Ensure the car and controller are powered ON.
- Verify that the car and controller are within range.
- Check for any obstructions preventing movement.
Issue: Controller not responding.
- Replace batteries in the controller.
- Ensure the controller is powered ON.
- Try re-pairing the controller with the car if applicable.
Maintenance and Care
- Clean the car with a dry cloth.
- Store the product in a cool, dry place.
- Periodically check for loose parts or damage.
Warranty Information
Jada Toys provides a limited warranty against manufacturing defects. Please refer to the product packaging or the Jada Toys website for detailed warranty terms and conditions.
Regulatory Information
This product complies with relevant safety and regulatory standards, indicated by the CE mark. Please follow all local regulations for disposal and operation.