Jada Toys Marvel RC Car

Customer Support

For customer support or problems, please contact us at:

Email: cs@jadatoys.com

Phone: 1-800-679-5232

Hours: 8:30 am to 5:30 pm Pacific Time, Monday - Friday

Warranty and Regulatory Information

U.S.A. & Canada: 30-Day Limited Warranty

Jada Toys, Inc. warrants this product to be free of defects in material and workmanship for thirty (30) days from the date of purchase. Jada Toys will repair or replace the product at its sole discretion. For warranty claims, contact customer support. This warranty does not cover damage from unauthorized modification, accident, misuse, or abuse. Valid only in U.S.A. and Canada.

Industry Canada Warning

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to two conditions: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation. The antenna type and gain must be approved by Industry Canada. This equipment complies with IC RSS-102 radiation exposure limits for uncontrolled environments.

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. If this equipment does cause harmful interference to radio or television reception, the user is encouraged to try to correct the interference by: reorienting the antenna, increasing separation between equipment and receiver, connecting to a different circuit, or consulting a technician.

Setup and Operation

Battery Installation

This vehicle requires 4 (four) standard "AA" batteries. The controller requires 2 (two) standard "AA" batteries. Batteries are not included.

Vehicle Battery Installation

1. Turn the vehicle's ON/OFF switch to "OFF".

2. Use a screwdriver (not included) to open the battery compartment door.

3. Remove and dispose of old batteries.

4. Insert 4 "AA" batteries, observing the correct polarity ([plus]/[minus]) as indicated inside the compartment.

5. Replace the battery compartment door and secure it with the screwdriver.

Controller Battery Installation

1. Press the lock button down with a screwdriver and slide the door open.

2. Remove and dispose of old batteries.

3. Insert 2 "AA" batteries, observing the correct polarity ([plus]/[minus]) as indicated inside the compartment.

4. Replace the battery compartment door.

How to Play (Pairing)

1. Turn the vehicle ON, then turn the transmitter controller ON within 17 seconds. Do not press other buttons during pairing.

2. The LED on the vehicle and controller will blink.

3. Once paired, the controller LED will stop blinking and stay on.

4. If pairing fails, turn both OFF and try again.

Note: If controller or vehicle LED blinks or dims, replace batteries. For multiple vehicles, pair only one controller to one vehicle at a time to avoid interference.

Controller Functions

The controller allows for:

• Forward movement
• Reverse movement
• Neutral position
• 360° Rotation

The vehicle has an ON/OFF switch.

Safety and Maintenance

General Safety Tips

• Toy surface may become hot; do not operate if electronics get wet.
• Do not operate in water, snow, sand, grass, or wet/muddy surfaces.
• Never play on streets.
• Do not pick up the vehicle while in motion.
• Place the car gently on the floor by hand; never throw it.
• Avoid collisions with walls, hard objects, or bodies.
• Keep fingers, hair, and loose clothing away from tires and wheel hubs.
• To avoid accidental operation, remove controller batteries when not in use.
• Do not connect to other power supplies or insert wires into outlets.
• Rest the vehicle for at least 5 minutes after every 15 minutes of operation.
• Stay clear of obstructions and hazards.

Battery Safety Information

• Use alkaline batteries recommended.
• Do not mix battery types (alkaline, carbon-zinc, rechargeable).
• Remove batteries if the toy will not be used for a long period.
• Dispose of batteries safely; do not burn them.
• Rechargeable batteries must be removed before charging and charged by adults only.
• Do not recharge non-rechargeable batteries.
• Do not mix new and used batteries.
• Insert batteries with correct polarity.
• Remove exhausted batteries.
• Do not short-circuit terminals.

Cleaning Instructions

Wipe toy with a damp cloth and dry thoroughly. Do not immerse in water or use chemicals. Remove batteries before cleaning.

Disposal Instructions

Recycle or dispose of batteries and electronic toys according to local waste management guidelines. Contact local authorities for information.

Troubleshooting

Manufacturer Information

JADA TOYS, INC. CITY OF INDUSTRY, CA 91748, USA

Made in China

This product uses 2.4GHz remote control technology.

RF frequency band: 2411-2472 MHz. Transmitter power: 0.76dBm.

This product is in compliance with Directive 2014/53/EU.