Thule Yepp 2 Maxi Frame Mount

Product Overview

This document provides instructions for the Thule Yepp 2 Maxi Frame Mount child bike seat. It is designed for rear-mounted bicycle use.

Important: Please read these instructions carefully and keep them for future reference.

Compliance: Meets EN 14344:2022 standards.

Compatibility and Specifications

Age/Weight/Height Limits:

Bicycle Frame Compatibility:

• Frame Tube Diameter:
• Circular: Ø 28-40 mm (1.10-1.57 inch)
• Oval: Max 40 mm (Max 1.57 inch)
• Frame Tube Shape: Suitable for circular, oval, triangular, and square frames.
• Frame Tube Clearance: Requires at least 15 cm (6 inches) clearance between the seat post and the rear wheel fender.
• Not suitable for: Carbon fiber bikes where frame integrity might be compromised.

Maximum Speed: 25 km/h (15 mph)

Included Parts

• Child Seat (x1)
• Mounting Bracket (x1)
• Support Arms (x2)
• Hex Key (x1)
• Keys (x1 set)
• Bolts: M6x44 (x4), M6x58 (x4)

Installation Instructions

Step 1: Attach Mounting Bracket to Bicycle Frame

Identify the correct frame tube on your bicycle. Ensure there is sufficient clearance. Use the provided bolts (M6x44 or M6x58 depending on frame diameter) and the hex key to securely attach the mounting bracket to the bicycle frame. Tighten bolts to 8 Nm. [wrench emoji]

Step 2: Attach Support Arms to Seat

Insert the support arms into the designated slots on the child seat until they click into place. [click sound emoji]

Step 3: Mount Seat onto Bracket

Align the seat with the mounting bracket and slide it down until it locks securely. You should hear a click. [click sound emoji]

Step 4: Secure the Seat

Use the provided keys to lock the seat to the mounting bracket. [lock emoji]

Step 5: Adjust Footrests and Harness

Adjust the footrests to the correct height for your child. Ensure the 5-point harness is snug and secure. The harness can be adjusted by pulling the straps and then adjusting the buckle. [child with helmet emoji]

Safety Guidelines

• Always ensure the child is properly secured with the 5-point harness. [check mark emoji]
• Do not use the seat for children under 9 months old or exceeding the weight/height limits. [cross mark emoji] [baby emoji] [baby with crossed out face emoji]
• Do not use on electric bikes or bicycles with rear suspension. [cross mark emoji]
• Avoid riding in adverse weather conditions (heavy rain, snow, extreme heat/cold). [snowflake emoji] [sun emoji] [cloud with rain emoji]
• Always wear a helmet. [helmet emoji]
• Do not exceed the maximum speed of 25 km/h (15 mph). [speedometer emoji]
• Ensure the seat is properly locked before each ride. [lock emoji]
• Regularly check all bolts and straps for wear and tear. [warning emoji]
• This seat is not intended for use with bicycles that are not designed for carrying passengers.
• Do not use the seat if any parts are damaged or missing. [cross mark emoji]

Usage and Maintenance

• Clean the seat with mild soap and water.
• Store the seat in a dry place when not in use.
• Refer to the Thule website for replacement parts and accessories.

Accessories

Available accessories include:

• Thule Yepp Raincover (12020972)
• Thule Delight (20201516)
• Thule Yepp Harness Clip (12020920)

Disposal

Dispose of the product responsibly according to local regulations. [recycle bin emoji]

Contact Information

For further assistance, please visit the Thule website or contact an authorized Thule dealer.