Thule RideAlong 2 Child Bike Seat

Model Numbers: 100206, 100207, 100208

Product Description

This document provides instructions for the Thule RideAlong 2, a rear-mounted child bike seat. It is designed to be securely attached to a bicycle frame, allowing a child to ride safely as a passenger.

Certifications and Standards

The Thule RideAlong 2 complies with the following standards:

EN 14344:2022
ASTM F1625-00
TÜV SÜD GS Certified Safety

Included Parts

1x Key
2x Mounting screws
1x Mounting bracket
1x Child seat
4x M6x44 screws
4x M6x58 screws

General Instructions

Please read these instructions carefully and keep them for future reference.

Safety Information

Age, Weight, and Height Limits

EU: 9-72 months, 9-22 kg, up to 110 cm
Canada: 9-72 months, 20-40 lbs, up to 43.3 inches

Key Number: Keep your key number safe for potential replacement keys.

Bike Compatibility

Check your bike:

Compatible Frame Tube Shapes:
Circular tubes: Diameter 28-40 mm (1.10-1.57 inches)
Oval tubes: Maximum diameter 40 mm (1.57 inches)

Clearance Requirements: Ensure at least 15 cm (6 inches) of clearance between the child seat and the rear wheel.

Incompatible Frame Types:

Triangular frames
Square frames
⚠ Warning: Do not use on Carbon Fiber Bikes as it may cause frame damage.

Usage Guidelines and Warnings

⚠ Maximum Speed: Do not exceed 25 km/h (15 mph).
⚠ Weather Conditions: The seat is suitable for use in various weather conditions (sun, rain, snow).
⚠ Temperature: Be mindful of ambient temperature affecting the child.
⚠ Visibility: Ensure adequate lighting when riding at night.
⚠ Harness Use: Always ensure the child is properly secured with the harness.
⚠ Mounting: Ensure the seat is correctly and securely mounted to the bicycle.
⚠ Disposal: Do not dispose of the product in household waste. Recycle according to local regulations.

Installation Steps

Step 1: Attach Mounting Bracket

Slide the mounting bracket onto the bicycle frame's seat tube. Ensure it is correctly oriented.

Diagram shows the mounting bracket being slid onto the bicycle's seat tube.

Step 2: Mount Child Seat to Bracket

Align the child seat with the mounting bracket and push down until it clicks into place. Ensure the locking mechanism (A, B) is engaged.

Diagram shows the child seat being attached to the mounting bracket, with indicators for locking mechanisms.

Step 3: Secure the Seat

Insert and tighten the screws (C, D) to secure the seat to the bracket. Ensure the locking mechanism is engaged.

Diagram shows screws being inserted and tightened, and a locking mechanism being engaged.

Step 4: Bike Frame Compatibility and Screw Selection

Confirm your bike frame's diameter (28-40 mm circular, max 40 mm oval) and select the appropriate screws (M6x44 or M6x58) based on the frame thickness.

Diagram illustrates frame tube diameters and screw types (M6x44, M6x58) with quantities.

Step 5: Adjust Seat Position

Slide the child seat forward or backward on the bracket to achieve the desired position. Lock the seat in place.

Diagram shows the seat being adjusted along the bracket and then locked.

Step 6: Final Attachment and Tightening

Position the child seat correctly on the bike. Tighten the mounting screws to a torque of 8 Nm (Newton-meters) using a torque wrench. Ensure all screws are securely fastened.

Diagram shows the seat mounted on the bike and screws being tightened to 8 Nm.

Step 7: Securing the Child

Adjust the harness straps to fit the child snugly. Buckle the harness and ensure it is locked securely.

Diagram shows harness straps being adjusted and buckled, with a locking indicator.

Step 8: Child Placement and Harness Fastening

Place the child in the seat. Fasten the harness buckles by pushing them together until they click. Adjust the shoulder straps for a secure fit.

Diagram shows a child being placed in the seat and the harness buckles being fastened and adjusted.

Step 9: Adjusting Footrests

Adjust the height of the footrests to accommodate the child's leg length. Secure the footrests in the desired position.

Diagram shows the footrests being moved up or down and secured.

Step 10: Final Checks

Perform a final check of all connections, screws, and harness adjustments to ensure the seat is securely and safely installed.

Diagram shows a final check of the installed seat and harness.

Accessories

The Thule One-Key System allows for key management.

Additional accessories include:

Thule Yepp Harness Clip (Model: 12020920)
Thule Delight (Model: 20201516)
Thule Quick Release Bracket (Model: 100203)

Contact and Support

Manufacturer: Thule Sweden AB

Address: Borggatan 5, 335 73 Hillerstorp, SWEDEN

Website: www.thule.com

Email: info@thule.com

	Thule RideAlong 2 Child Bike Seat Installation and User Manual Comprehensive instructions for installing and using the Thule RideAlong 2 child bike seat, including safety guidelines, compatibility checks, and assembly steps.
	Thule RideAlong Lite 2 Child Bike Seat: Installation, Safety & User Manual Detailed instructions for installing and safely using the Thule RideAlong Lite 2 rear-mounted child bike seat. Covers product features, specifications, step-by-step assembly, safety warnings, usage guidelines, and compatible accessories. Ensure proper fit and secure transport for children on bicycles.
	Thule Yepp 2 Maxi MIK HD Child Bike Seat - Installation and Safety Guide Comprehensive instructions and safety guidelines for installing and using the Thule Yepp 2 Maxi MIK HD child bike seat. Learn about weight limits, age suitability, mounting, and proper harness adjustment.
	Thule Yepp 2 Maxi Frame Mount Child Bike Seat Installation and Safety Guide Comprehensive instructions for installing and using the Thule Yepp 2 Maxi Frame Mount child bike seat. Includes safety guidelines, compatibility information, and accessory details.
	Thule Yepp 2 Mini Child Bike Seat Installation and Safety Instructions Comprehensive instructions for installing and using the Thule Yepp 2 Mini child bike seat, including safety guidelines and product specifications.
	Thule Rear Bicycle Seat User Manual Comprehensive user manual for the Thule Rear Bicycle Seat, covering installation, safety, usage, and maintenance guidelines.
	Thule Yepp Nexxt 2 Maxi Frame Mount Installation Guide Comprehensive instructions for installing the Thule Yepp Nexxt 2 Maxi child bike seat onto your bicycle frame. Includes safety guidelines, compatibility checks, and step-by-step assembly.
	Thule Courier Child Bike Trailer: Instructions and Safety Guide Official instruction manual for the Thule Courier child bike trailer. Includes setup, safety guidelines, maintenance tips, and accessory information for safe and enjoyable use.