Important Information Regarding Wall Mounting
Note: Wall materials vary significantly. Therefore, screws and other fasteners for wall mounting are not included with the GRANVÅG mirror. For advice on suitable screw systems and fasteners for your specific wall type, IKEA recommends contacting your local specialized dealer or hardware store.
Parts List
Before beginning assembly, ensure all parts are present. The following components are included:
- 1x GRANVÅG Mirror Frame
- 2x Rectangular Panels (Part No. 10081184)
- 2x Screws (Part No. 10035670)
Tools Required (not included):
- Screwdriver (Phillips head recommended)
- Spirit Level
- Measuring Tape
Assembly Instructions
Step 1: Attach Screws to Frame
Attach two screws (Part No. 10035670) to the designated points on the GRANVÅG mirror frame. Ensure they are securely fastened.
Diagram shows: A person examining the mirror frame and screws. An exploded view of a screw (10035670) being inserted into a hole on the mirror frame. Quantity: 2x screws.
Step 2: Prepare Wall for Mounting
Insert one wall plug/anchor into the wall at the desired mounting location. This step specifically indicates using a wall plug, with a crossed-out symbol for a different type of screw, emphasizing the correct fastener for wall installation.
Diagram shows: A person looking confused at parts, then a person looking at IKEA instructions. A wall plug/anchor being inserted into a wall. Quantity: 1x wall plug/anchor.
Step 3: Secure Wall Plug
Push the wall plug/anchor firmly into the wall until you hear a "Click!", indicating it is properly seated and secured.
Diagram shows: A close-up of the wall plug/anchor being pushed into the wall, with a 'Click!' text bubble.
Step 4: Insert Rectangular Panels and Mark Wall
Insert the two rectangular panels (Part No. 10081184) into the bottom slots of the mirror frame. Then, measure and mark the wall for the mounting points. The vertical distance between the top mounting point and the bottom support should be approximately 290 mm (11 27/64 inches).
Diagram shows: The rectangular panel (10081184) being inserted into the mirror frame. A hand pointing to the bottom slot. A measurement of 290 mm (11 27/64 inches) indicated between two points on the wall mounting bracket.
Step 5: Hang the Mirror
Carefully lift the GRANVÅG mirror and hang it onto the wall mount, ensuring the top hook of the mirror frame engages with the wall plug/anchor.
Diagram shows: The mirror frame being lifted and placed onto the wall mount. A downward arrow indicates the hanging action.
Step 6: Secure the Mirror
Secure the mirror to the wall mount by inserting one screw through the designated hole at the bottom of the mirror frame and tightening it into the wall plug/anchor. This ensures the mirror is stable and safely attached.
Diagram shows: A screw being inserted into the bottom part of the mirror frame, securing it to the wall mount. Quantity: 1x screw.
