Important Information
As wall materials vary, screws for fixing the mirror to the wall are not included. For advice on suitable screw systems and wall plugs, it is recommended to contact your local specialized dealer. Ensure you choose screws and wall plugs appropriate for your specific wall material to guarantee secure installation.
Tools and Parts Required
Before you begin, ensure you have the following tools and parts:
Tools (not included):
- Phillips head screwdriver (or appropriate type for chosen screws)
- Spirit level
- Measuring tape
Parts (included):
- GRANVÅG mirror frame (1 piece)
- Long rectangular support piece (Part ID: 10081184, 1 piece used for bottom support)
- Flat-head screws (Part ID: 10035670, 4 pieces total: 2 for hanging bracket, 2 for bottom support)
- Wall plug covers (2 pieces)
Assembly Steps
Step 1: Attach the Hanging Bracket
Position the GRANVÅG mirror frame. Using a screwdriver, secure the top hanging bracket to the mirror frame with two flat-head screws (Part ID: 10035670). Ensure they are tightened securely.
✔ Use two screws (10035670).
Step 2: Prepare the Wall for Mounting
Identify the desired location for your mirror on the wall. Using a drill, create a hole suitable for your chosen wall plug and screw (not included). Insert the wall plug into the drilled hole. Screw the appropriate wall screw into the wall plug, leaving a small portion exposed for hanging. Ensure the screw is firmly seated.
✘ Do not use screws that are not designed for wall mounting or are incompatible with your wall plugs.
Step 3: Attach the Wall Plug Cover
Take the wall plug cover and firmly push it onto the exposed part of the wall plug until you hear a "click" sound, indicating it is securely in place.
Step 4: Mark the Bottom Support Position
Temporarily hang the mirror on the wall screw from Step 2. Measure the distance from the top of the mirror's hanging loop to the intended position of the bottom support screw. This measurement should be approximately 35 15/64 inches (895 mm). Mark this lower position on the wall. Remove the mirror from the wall.
↕ Measure 35 15/64" (895 mm) from the top hanging point to the bottom screw position.
Step 5: Hang the Mirror
Carefully lift the GRANVÅG mirror and align the hanging loop at the top of the mirror frame with the wall screw installed in Step 2. Gently lower the mirror onto the screw, ensuring it is securely seated and hanging straight.
Step 6: Secure the Bottom Support
Take the long rectangular support piece (Part ID: 10081184). Insert this piece into the designated slots at the bottom of the mirror frame from the back. Secure it in place using the remaining two flat-head screws (Part ID: 10035670), tightening them with a screwdriver. This piece provides stability and prevents the mirror from swinging.
→ Insert the support piece (10081184) and secure with two screws (10035670).
