Important Information Regarding Wall Mounting
As wall materials vary significantly, screws and other fasteners for wall attachment are not included with the product. For advice on suitable screw systems and mounting hardware for your specific wall type, it is recommended to contact a local specialized dealer or hardware store. This ensures the mirror is securely and safely installed.
Tools Required
Before beginning assembly, ensure you have the following tools:
- Screwdriver (not included)
- Spirit level
- Tape measure
Parts Included
The following components are included in the GRANVÅG package:
- Rectangular Mirror Panel (1x) - Part No. 10081184
- Frame Fasteners (2x) - Part No. 10035670
Assembly Instructions
Step 1: Attach Frame Fasteners
Insert the two frame fasteners (Part No. 10035670) into the designated holes on the top bar of the mirror frame. These fasteners will help secure the mirror panel within the frame.
Visual description: A diagram showing two screws (10035670) being inserted into holes on the top horizontal bar of the mirror frame.
Step 2: Install Hanging Mechanism
Attach the hanging hook mechanism to the top center of the mirror frame. This involves inserting a cylindrical piece into the top hook of the frame, followed by securing it with a circular cap. Ensure the mechanism clicks securely into place, indicating proper attachment.
Visual description: A diagram illustrating the cylindrical hanging piece being inserted into the top loop of the mirror frame, followed by a separate circular cap being pushed onto it until an audible "Click!" is heard, indicating it is locked.
Step 3: Prepare for Wall Mounting
Identify the desired location on your wall for mounting the mirror. From the top of the installed hanging mechanism, measure 290 mm (approximately 11 27/64 inches) downwards. Mark this point on the wall. This mark indicates the precise position where your wall screw or plug (not included) should be installed to support the mirror.
Visual description: A diagram showing the mirror frame with the hanging mechanism. A measurement of 290 mm (11 27/64") is indicated from the top of the hanging mechanism to the center point where the wall screw should be placed. An arrow points to the wall, indicating where to mark for drilling.
Step 4: Insert Mirror Panel
Carefully slide the rectangular mirror panel (Part No. 10081184) into the frame from the top. Ensure it is fully seated and aligned within the frame's grooves.
Visual description: A diagram showing the rectangular mirror panel (10081184) being slid downwards into the open top of the mirror frame.
Step 5: Mount Mirror to Wall
Once the wall screw/plug is securely installed at the marked position, carefully lift the GRANVÅG mirror and align the hanging mechanism with the wall screw. Lower the mirror onto the screw, ensuring it is firmly seated and stable on the wall.
Visual description: A diagram depicting the mirror being lowered onto a wall-mounted screw, showing the hanging mechanism engaging with the screw head.
Step 6: Secure Mirror
To further secure the mirror and prevent accidental dislodgement, insert the small locking piece into the designated slot at the back of the mirror frame. Push it firmly until it locks the mirror in place against the wall. This step ensures the mirror remains stable and safe.
Visual description: A diagram showing a small locking piece being pushed horizontally into a slot on the back of the mirror frame, securing it to the wall bracket.
