FCC Caution
⚠️ Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- —Reorient or relocate the receiving antenna.
- —Increase the separation between the equipment and receiver.
- —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- —Consult the dealer or an experienced radio/TV technician for help.
Important: Change or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Printer Overview
The M1 Label Printer features the following components:
- 1. Cover open button: Used to open the printer cover for label loading.
- 2. Power button: Press and hold to turn the printer on/off. Double-click to print a test page.
- 3. Type-C Port: For charging the printer.
- 4. Tear Label knife: A built-in blade to easily tear off printed labels.
Two QR codes are provided for downloading the companion mobile application. Scan either QR code or search for "Marklife" in your device's app store (App Store or Google Play).
Quick Printer Connection
- Press the power button for 3 seconds to power on the printer.
- Double-click the power button to print a test page.
- On your phone, turn off wireless connectivity (e.g., Bluetooth/Wi-Fi), then open the "Marklife" app.
- In the app, click the "UNLINK" button to allow wireless connection.
- Select the printer from the list and connect successfully.
- Click "Create label", fill in the corresponding label size, edit the content, and print.
What's in the Package?
- 1. Printer*1
- 2. USB cable*1
- 3. User Manual*1
- 4. Label roll*1
Loading the Label
To load a new label roll:
- Press the open button to open the printer cover.
- Place the new label roll inside, ensuring the paper is oriented correctly to face the print head.
[Diagram description: An illustration shows a hand pressing a button to open the printer lid, revealing the internal compartment. Another illustration shows the label roll correctly inserted with the paper feeding towards the print head.]
Indicator Light Status
| Light Color | Status |
|---|---|
| Green Light | Normal, Plenty of power |
| Red Light | Error (No paper, Cover is open, The paper face is not on the print head) |
| Blue Light | Wireless connected |
APP Operation
The "Marklife" app allows you to create and print labels. The typical workflow involves:
- Connect the printer: Ensure the printer is powered on and then connect it via the app (using the "UNLINK" or similar button if previously connected, or by selecting it from available devices).
- Create label: Tap the "Create label" button.
- Select Label Type: Choose between "Continuous Label" or "Gap Label". The "Gap Label" option is typically selected for standard perforated labels.
- Set Print Parameters: Adjust settings like "Print Density" and "Print Number" as needed.
- Print: Tap the "Print" button to send the label design to the printer.
[Diagram description: The app interface shows four main steps: 1. Disconnect/Connect (UNLINK), 2. Create Label, 3. Label Type Selection (Continuous vs. Gap), 4. Print Settings (Density, Number) and the Print button.]
