FCC Caution
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Important: Change or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Product Overview
The Marklife P15 is a portable label printer.
Key Components:
- 4. Tear Label knife: A blade for cutting labels.
- 1. Cover open button: Used to open the printer cover.
- 2. Power button: Turns the printer on/off and can be used for test printing.
- 3. Type-C Port: For charging or data connection.
[Image of the Marklife P15 printer showing labeled components]
Quick Printer Connection
- Press the power button for 3 seconds to power on the device.
- Double-click the power button to print a test page.
- Turn off your phone's wireless connection, open the Marklife APP, and click the "UNLINK" button to allow wireless connection.
- Select the printer and connect successfully.
- Click "Create label", fill in the corresponding label size, edit the content, and print it.
What's in the Package?
- Printer * 1
- USB cable * 1
- User Manual * 1
- Label roll * 1
Loading the Label
Follow these steps to load a new label:
- Press the open button to place the new label.
- Ensure the paper faces the print head.
[Diagram showing the printer lid opening and paper being inserted, with an arrow indicating the paper orientation towards the print head]
Indicator Light
- ● Green Light: Normal, Plenty of power.
- ● Red Light: Error (No paper, Cover is open, The paper face is not on the print head).
- ● Blue Light: Wireless connected.
APP Operation
Use the Marklife app to create and print labels:
- Step 1: [Button: UNLINK] - Disconnect from the printer.
- Step 2: [Button: Create label] - Start creating a new label.
- Step 3: Select Label Type. Choose between 'Continuous Label' or 'Gap Label' (indicated by a checkmark).
- Step 4: Set Print Parameters. Adjust 'Print Density' and 'Print Number' (indicated by checkmarks).
[Button: View tutorial] - Access help and guides.
[Button: Print] - Start the printing process.
