P50 Label Printer User Manual
FCC Caution
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Important: Change or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Product Overview
Diagram showing the P50 Label Printer with labeled parts: Power button [?], Type-C Port [?], Tear Label knife [?].
Users can download the associated application by scanning the QR code provided or searching for "Marklife" in the App Store or Google Play.
Quick Printer Connection
- Press the power button for 3 seconds to power on.
- Double-click the power button to print a test page.
- Turn off your phone's wireless connection, open the APP, and click the "UNLINK" button [?️] to allow wireless connection.
- Select the printer and connect successfully.
- Click "Create label" [?], fill in the corresponding label size, edit the content, and print it.
What's in the Package?
- Printer*1
- USB cable*1
- User Manual*1
- Label roll*1
Loading the Label
Instructions
- Press the open button to place the new label.
- The paper must face the print head.
Diagram illustrating label loading: A hand [?] is shown pressing an open button, and a roll of label paper is being inserted into the printer. An arrow indicates the direction of paper feed.
Indicator Light
| Green Light: | Normal, Plenty of power |
| Red Light: | Error (No paper, Cover is open, The paper face is not on the print head) |
| Blue Light: | Wireless connected |
APP Operation
The APP operation involves several steps illustrated by icons:
- Step 1: UNLINK button [?️] (to disconnect).
- Step 2: Create label button [?].
- Step 3: Select label type: Continuous Label [⚪] or Gap Label [✔️].
- Step 4: Set print parameters: Print Density [✔️], Print Number [✔️], followed by the Print button [?️].
Additional actions include: "View tutorial" and "Connect the printer".
