ASSEMBLY INSTRUCTIONS
Heron Large Desk Lamp
Item # IKF 3506
NOTICE
This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.
Diagram Description
The accompanying diagram illustrates the Heron Large Desk Lamp, detailing its adjustable components. Key parts include the shade (C), arms (B), and adjustment knobs (A) used to set the desired angle. The diagram also points out the protective cover (D) for the plug and the touch-sensitive dimmer switch (E).
Assembly Steps
- Carefully remove all parts from the box. Place on a clean, soft surface.
- Remove protective cover (D) from plug.
- Plug into electrical outlet and test fixture.
- To adjust shade (C) and arms (B) loosen knobs (A), adjust to desired angle then tighten knobs (A).
Dimmer switch operation: Touch dimmer (E) to adjust between low, medium, high and off settings.
Care Instructions
Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.
Certifications: [Intertek Certified], [UL Listed], [Suitable for Dry Locations], [LED Compatible]
