Safety Instructions
Please read and follow these safety guidelines:
- Avoid dropping the product.
- Do not disassemble the device.
- Keep the device away from extreme temperatures.
- Use only original or certified cables for charging and connection.
- Do not clean the device with corrosive substances or oils.
- Do not use the device outdoors during thunderstorms.
Note: This wireless equipment may cause radio interference and cannot provide life-related services. Certified by Anker Technology Co., Limited. Device name: A3105, Soundcore 2.
Charging Your SoundCore
To charge your SoundCore speaker:
- Flashing Red LED: Low battery
- Solid Red LED: Charging
- Solid White LED: Fully charged
To prolong battery life, fully recharge the device at least once every 45 days.
Power On/Off
| Action | Status | LED Indicator |
|---|---|---|
| Press once | Power On | Solid White LED |
| Press and hold for 1 second | Power Off | LED off |
Bluetooth Pairing
To pair your SoundCore speaker via Bluetooth:
- Press once: Enters pairing mode.
- Press and hold for 2 seconds: Unpairs the currently connected device and re-enters pairing mode.
- Flashing Blue LED: Pairing mode.
- Solid Blue LED: Connected to a device.
When powered on, SoundCore automatically connects to the last connected device if it is available. If not, it will automatically enter pairing mode.
True Wireless Stereo (TWS) Pairing
- Double Flashing Blue LED: True Wireless Stereo pairing mode.
With True Wireless Stereo technology, you can pair your SoundCore 2 with another SoundCore 2 speaker to enjoy enhanced sound effects with independent left and right audio channels across both speakers.
Connect with AUX
SoundLine AUX cables are sold separately.
To return to Bluetooth mode, remove the AUX cable from your SoundCore speaker.
Controls
| Action | Playback Function | Call Function |
|---|---|---|
| Press once (▷) | Play / Pause | Answer / End call |
| Press twice (▷▷) | Next track | - |
| Press +/- | Volume up / down | - |
| Press and hold for 1 second (▷ >1S) | - | Reject call |
| Press once (?) | - | Put current call on hold and answer incoming call |
| Press once (?) | - | Switch between held call and active call |
| Press and hold for 1 second (? >1S) | - | Transfer call between speaker and phone |
| Solid Blue LED (?) | - | In call |
| Flashing Blue LED (?) | - | Incoming call |
| Press and hold for 1 second (? >1S) | Activate Siri / other voice controls | - |
Specifications
Specifications are subject to change without prior notice.
| Feature | Value |
|---|---|
| Input | 5V = 2A |
| Playtime (varies by volume & content) | Up to 24 hours |
| Audio Output | 12W+ |
| Impedance | 4 Ω |
| Range | 20 m / 66 ft |
| Dimensions | 168 x 47 x 56 mm / 6.6 x 1.9 x 2.2 in |
| Charging Time | 3 hours |
| Drivers (full range) | 1.5" x 2 |
| Frequency Response | 70 Hz - 20 KHz |
| Bluetooth Version | V5.0 |
| Water Protection Rating | IPX7 |
| Weight | 414 g / 14.6 oz |
Customer Service
18-month limited warranty
Anker products come with an 18-month limited manufacturer's warranty.
Lifetime technical support
For technical support, please contact Anker.
- Email: support@anker.com
- Phone (US): 1-800-988-7973 (Mon-Fri 9:00-5:00 PST)
- Phone (Korea): +82-2-6464-7088 (Mon-Fri 9:00-17:30)
- Phone (Japan): 03-4455-7823 (Mon-Fri 9:00-17:00)
- Phone (Germany): 069-9579-7960 (Mon-Fri 6:00-11:00)
- Phone (China): 400-0550-036 (Mon-Fri 9:00-17:30)
- Phone (UK): 01604-936200 (Mon-Fri 6:00-11:00)
FAQs and Support
For frequently asked questions and more information, please visit: anker.com/support
