Safety Instructions
To ensure safe operation and prolong the life of your Anker SoundCore 2, please follow these instructions:
- Avoid dropping the device.
- Do not disassemble the device.
- Do not submerge the device in water.
- Avoid exposure to extreme temperatures.
- Use only original or certified cables for charging.
- Do not use corrosive cleaners or oil to clean the device.
- Do not use the device outdoors during thunderstorms.
Important Notices
CE Compliance: This product complies with the radio interference requirements of the European Community.
Recycling Information: This product is designed and manufactured with high-quality materials and components that can be recycled and reused. The crossed-out wheeled bin symbol indicates that the product must not be discarded as household waste. It should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling help protect natural resources, human health, and the environment. For more information, contact your local municipality, waste disposal service, or the retailer where you purchased the product.
FCC Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio / TV technician for help.
RF Warning Statement: The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Charging Your SoundCore 2
Connect the SoundCore 2 to a power source using a USB cable. The LED indicator shows the charging status:
| LED Status | Meaning |
|---|---|
| Flashing red | Low battery |
| Steady red | Charging |
| Steady white | Fully charged |
To preserve battery lifespan, fully charge the device at least once every 45 days.
Turning On/Off
To turn the SoundCore 2 on or off, press the power button. The LED indicator shows the power status:
| Action | Power Status | LED Status |
|---|---|---|
| Press | ON | Steady white |
| Press and hold for 1 second | OFF | Off |
Bluetooth Pairing
To pair your SoundCore 2 with a Bluetooth device:
| Action | Mode |
|---|---|
| Press the Bluetooth button | Enter pairing mode |
| Press and hold the Bluetooth button for 2 seconds | Un-pair connected device and re-enter pairing mode |
The LED indicator shows the pairing status:
| LED Status | Meaning |
|---|---|
| Flashing blue | Pairing mode |
| Steady blue | Connected to a device |
When turned on, the SoundCore 2 will automatically connect to the last connected device if available. If not, it will enter pairing mode.
Connecting via AUX
The SoundCore 2 can also connect via an AUX cable (sold separately). Simply plug the AUX cable into the device and your audio source.
To return to Bluetooth mode, remove the AUX cable from your SoundCore 2.
Controls
The SoundCore 2 features intuitive controls for music playback and call management:
| Action | Music Control | Call Control |
|---|---|---|
| Press Play/Pause button (♪) once | Play / Pause | |
| Double press Play/Pause button (♪) | Skip forward | |
| Press Volume Up/Down (+/-) | Volume up / down | |
| Press Call button (?) once | Answer / End call | |
| Press and hold Call button (?) for 1 second | Reject call | |
| Press Call button (?) once during a call | Put current call on hold and answer incoming call | |
| Press Call button (?) once during a held call | Switch between held call and active call | |
| Press and hold Call button (?) for 1 second during a call | Transfer a call between speaker and mobile phone | |
| Press and hold Voice Control button (?) for 1 second | Activate Siri / other voice control software |
Call LED indicators:
| LED Status | Meaning |
|---|---|
| Steady blue | On a call |
| Flashing blue | Incoming call |
Specifications
Specifications are subject to change without notice.
| Feature | Detail |
|---|---|
| Input | 5V = 2A |
| Play time (varies by volume level and content) | Up to 24 hours |
| Audio output | 6W × 2 |
| Impedance | 4 Ω |
| Range | 20 m / 66 ft |
| Size | 168 x 47 x 56 mm / 6.6 x 1.9 x 2.2 in |
| Charging time | 3 hours |
| Driver (full range) | 1.5" x 2 |
| Frequency response | 70 Hz - 20 KHz |
| Bluetooth version | V4.2 |
| Waterproof rating | IPX 5 |
| Weight | 414 g / 14.6 oz |
