Proscenic P11 Smart Cordless Vacuum Cleaner User Manual

Important Safety Precautions

Please read this manual carefully before using the product.

• Do not use the vacuum cleaner to suck up detergents, alcohol, thinners, broken glass, needles, soot, wet objects, liquids, matches, etc.
• Do not use the vacuum cleaner for cement, plaster, construction materials, or large toys, as this may cause malfunctions such as blockage or motor shutdown.
• Keep the vacuum cleaner away from fire and high-temperature locations.
• When using the vacuum cleaner, ensure the filter and floor brush roller are installed.
• Do not block the suction inlet or the rotation of the brush roller, as this may cause motor failure.
• Do not pour or spray water or other liquids into the machine to avoid short circuits and damage to electronics.
• When using a new battery or after a long period of disuse, please charge the battery fully. If the vacuum cleaner is not used for an extended period, charge and discharge the battery at least once every three months.
• When the vacuum cleaner is fully charged and needs cleaning or repair, unplug the charger immediately by pulling the adapter, not the power cord.
• When cleaning the vacuum cleaner, use a dry cloth. Do not use alcohol, thinners, or other detergents, as they may damage the housing or cause discoloration.
• Do not use or store the vacuum cleaner in extreme temperature conditions (very high or low). It is recommended to use the vacuum cleaner in an indoor environment between 0°C and 40°C. Store in a cool, dry place and do not expose to direct sunlight for extended periods.
• Do not allow children to use or play with the vacuum cleaner.
• If the vacuum cleaner does not function when fully charged, it must be inspected and repaired at a designated service center. Do not disassemble it without authorization.
• Old battery packs should be recycled safely and not disposed of in regular trash.
• If the power cord is damaged, it must be replaced by a specialized technician from the manufacturer or a similar service center to avoid any danger.
• After use, it is necessary to mount it on the wall or a hook, and it cannot be placed or mounted on its own to prevent it from hitting people.

What's in the Box

• 1 x Metal extension tube
• 1 x Main body (motor)
• 1 x Electric floor brush
• 1 x Power adapter
• 1 x Round brush
• 1 x Wall-mounted charging station installation kit
• 1 x User manual
• 1 x Elongated flat suction head
• 1 x Cleaning brush
• 1 x Anti-mite electric brush (Mini brush)

Product Composition

The Proscenic P11 Smart Cordless Vacuum Cleaner consists of the following main parts:

• Main body
• Motor
• Dust container
• Dust container lid buckle
• Dust container lid
• Motor joint button
• Touch display
• Exhaust grilles
• Handle
• Power switch
• Battery release button
• Removable battery
• Dust container release button
• Tube interface
• Metal extension tube
• Electric broom head connection button
• Electric floor brush
• LED illumination

Important Notes:

• Regularly wash the component filter (NOT HEPA) with cold water. Ensure filters are completely dry before reassembly.
• The vacuum cleaner is designed for regular use. Regular use may lead to buildup around the brushes and HEPA filter. It is recommended to perform regular cleaning (do not wash the HEPA filter) or replace them periodically to maintain optimal vacuum cleaner performance.

Accessory Installation

Follow these steps to install accessories:

1. Attach the main body to the extension tube and then to the floor brush.
2. Alternatively, attach the main body to the extension tube and then to other accessories like the mini brush or crevice tool.

Wall-Mounted Charging Station Installation

Two methods are available for installing the charging station:

Method 1: Adhesive Installation

1. Attach the mounting bracket to the wall.
2. Align the vacuum cleaner with the bracket.
3. Ensure the bracket is mounted level (90°).

Method 2: Screw Installation

1. Insert 3 screws according to the alignment sticker holes.
2. Insert plastic expansion tubes into the screw holes.
3. Align the hook with the screw holes, then install and tighten the screws.

Battery Charging

DC Port Charging:

• Red light indicates charging.
• Green light indicates charging is complete.

Wall-Mounted Charging Base:

• When the battery is low, the first power indicator cell flashes white. Please charge it promptly.
• If the power is too low, the machine will automatically shut down to protect the battery. In this state, pressing the power switch will not activate the machine. The first power indicator will flash white. Charge the battery or replace it with a fully charged one.

Battery Status Indicators:

• Fully charged: Three solid bars.
• Charging: Flashing bars.
• Low battery: One flashing bar.

Attention:

• This machine can only be charged with the supplied power adapter.
• The machine cannot operate during the charging process. Pressing the power switch during charging will not function.

Product Usage

Using the Main Body

• Start/Stop: Press the power switch button to start the machine; press again to stop.
• Suction Power: There are 3 suction levels. Press the [88] icon on the motor display panel to adjust the suction level: Silent, Auto, and Powerful modes.

Note: The power switch is a jog button that turns the machine on/off with a single touch.

Note: For optimal cleaning results, the vacuum cleaner will automatically adjust to a strong mode for 3 seconds after the power button is pressed. This is a normal phenomenon.

Using Attachments

The desired suction head can be attached to the suction head holder. The metal extension tube can be used selectively depending on the environment.

Using the Electric Floor Brush

The electric floor brush can be used for cleaning hard floors, tiles, or short-pile carpets. Using a metal extension tube is recommended for a better experience.

Using Specific Brushes

Anti-mite Electric Brush (Mini Brush)

The anti-mite electric brush can be used for cleaning sofas, mattresses, cribs, etc.

Elongated Flat Suction Head

The elongated flat suction head can be used for cleaning ceilings, bookshelves, computer keyboards, and tight spaces that are difficult to clean.

Round Brush

1. Directly connected to the motor: The round brush can be used for cleaning tables, cabinets, sofas, short-pile carpets, and so on.
2. Attached to the metal extension tube: The round brush can be used for cleaning high places such as ceilings and curtains. (Shows a 90° angle attachment).

Disassembly and Maintenance

Detaching the Dust Container

Press the two release buttons on both sides of the dust container simultaneously.

Cleaning the Filter Component

Diagram shows filter components being disassembled for cleaning.

Note: After washing the HEPA filter and filter sponge, dry them before use. Do not expose them to the sun.

Installing Filter Components

1. Align the air guide block of the stainless steel filter group with the dust container inlet and install the filter group into the dust container from the top. Ensure the limit slot aligns with the dust container's limit bar.
2. Insert the filter sponge into the lower part of the HEPA cover. Ensure the filter sponge is fully secured by the 5 protrusions; otherwise, it will affect the filter effect.
3. Hold the HEPA group with the cord facing upwards and insert it into the dust container from the top. Ensure the HEPA group's bayonet limit aligns with the dust container's limit bar.

Installing the Dust Container

1. Insert the dust container into the motor. Ensure the snaps are in position.
2. Push the bottom of the dust container in the direction shown until a click is heard.

Battery Removal and Installation

Removing the Battery

Press the two battery release buttons on both sides simultaneously, grip the battery, and pull it out.

Installing the Battery

Align the battery slot with the card slot, press the bottom to slide it into the battery slot until it clicks into place.

Troubleshooting

Notes:

• If the power cord is damaged, it must be replaced at a designated service center by the manufacturer to avoid risks.
• If you need to purchase spare parts such as HEPA filters, batteries, etc., please contact Proscenic customer service.

Parameters

Post-sales Warranty

The Proscenic professional support team is responsible for and provides support for all products supplied with a 12-month warranty from the date of purchase.

You can contact Proscenic customer service via email: service-it@proscenic.cn