IKEA LAGAN Integrated Dishwasher
Important Safety Information
Warning!
Before proceeding with installation, read the safety information in the User Manual.
This warning is repeated in multiple languages throughout the document, including German, French, Italian, Danish, Norwegian, Finnish, Swedish, Icelandic, Portuguese, Spanish, Greek, Dutch, Polish, Russian, Slovak, Lithuanian, Czech, Hungarian, Bulgarian, Romanian, Croatian, Serbian, Slovenian, Chinese (Simplified and Traditional), Estonian, Latvian, Ukrainian, Arabic, Indonesian, Malay, and Thai.
Installation Overview
The following diagrams illustrate the installation process:
Diagram 1: Shows a person holding a tape measure, screwdriver, spirit level, scissors, drill, and gloves, indicating necessary tools.
Diagram 2: Depicts two scenarios. The first shows a person with a cross over stacked wooden planks, suggesting an incorrect method. The second shows two people correctly handling stacked planks.
Diagram 3: Shows a person with a cross over a drawer being assembled incorrectly, followed by a correct assembly of a drawer.
Diagram 4: Illustrates a person looking confused at a partially assembled item, then correctly assembling it with assistance from IKEA.
Diagram 5: Shows a person connecting hoses to a water source and a drain, with a warning symbol indicating incorrect connection. Another diagram shows a person correctly connecting hoses.
Parts List
- A: Screws (18x)
- B: Springs (2x)
- C: Bracket (1x)
- D: Circular plates (2x)
- E: Brackets (1x)
- F: Brackets (1x)
- G: Metal strip (1x)
- H: Cylindrical components (2x)
- I: Screws (2x)
- J: Foldable component (1x)
Dimensions and Placement
The dishwasher requires specific clearances for installation:
- Height: 840mm - 880mm
- Width: 550mm
- Depth: 450mm
- Space for appliance: 835mm - 875mm (height)
- Clearance from wall: 45mm
- Distance from front edge: 120mm
- Base height: 45mm
- Base depth: 448mm
Diagram 6: Shows the dishwasher being tilted and placed into its designated cabinet space. It also shows a person securing the appliance with screws and a screwdriver.
Assembly Steps
Follow these steps for assembly:
- Step 1: Insert component G (1x) into the designated slots.
- Step 2: Secure components using screws and a screwdriver.
- Step 3: Attach components H (2x) and I (2x) using a screwdriver.
- Step 4: Attach bracket C (1x) to the cabinet, ensuring it is 450mm wide.
- Step 5: Slide the dishwasher into the cabinet. Ensure correct alignment and secure it.
- Step 6: Secure the appliance using screws and a screwdriver, ensuring it is level.
- Step 7: Attach component J (1x) and ensure the weight is between 3.5kg and 8.5kg.
- Step 8: Attach brackets and secure with screws, ensuring a maximum depth of 10mm for the screws.
- Step 9: Attach components D (1x), A (4x), E (1x), A (4x), F (1x), D (1x), A (4x) using screws and a screwdriver. Drill holes with a diameter of 10mm, up to 5mm deep.
- Step 10: Secure the dishwasher door and ensure it is properly aligned.
- Step 11: Attach component B (2x) and secure with screws.
- Step 12: Connect the water inlet and drain hoses. Ensure correct water connection and avoid leaks. The maximum hose length should be 1000mm.
- Step 13: Ensure water connections are made correctly, with inlet hoses at 120cm and 130cm, and the drain hose at 105cm or max 100cm from the floor.
Final Checks
Ensure all connections are secure and the appliance is stable.
Diagram 14: Shows a person checking the alignment of the dishwasher and securing it with screws.
Diagram 15: Illustrates the final checks and adjustments being made to the dishwasher.
Diagram 16: Shows the final installation of the dishwasher, with a focus on securing it with screws and springs.
Diagram 17: Depicts the water inlet and drain connections, emphasizing correct plumbing and maximum hose lengths.
Diagram 18: Further illustrates the water connection details, showing correct hose lengths and placement.
