myTouchSmart Wi-Fi Smart Devices Quick Start Guide and App Setup

Getting to Know Your App

The myTS app allows you to control your smart home devices remotely.

Key App Features:

• Group Devices: Organize multiple devices into groups for simultaneous control and scheduling. Devices must be powered on to be controlled.
• Remote Control: Turn devices ON/OFF or adjust settings like dimming remotely.
• Device Management: Edit device names and pictures for easy identification.
• Scheduling: Set ON/OFF timer programs for your devices.

Voice Control Integration

Connect your myTouchSmart devices with popular voice assistants.

Amazon Alexa:

1. Open the Amazon Alexa app.
2. Enable the myTS skill.
3. Ask Alexa to "Find new devices" to link your myTS devices.
4. To add more devices later, say, "Alexa, find new devices."

Google Assistant:

1. Open the Google Home app.
2. Tap the Home icon, then the Add icon, and select "Set up device."
3. Tap "Have something already set up?"
4. Search for "myts," select the myTS icon, and follow the prompts.
5. To add more devices later, say, "Okay, Google, sync my devices."

Product Overview

myTouchSmart offers a range of Wi-Fi enabled smart home products:

• 40792 Wi-Fi In-Wall Smart Switch
• 40572 Wi-Fi Plug-in Smart Switch
• 39845 Wi-Fi Simple-Set Outdoor Smart Plug
• 40795 Wi-Fi In-Wall Smart Outlet

For additional information and other myTS Wi-Fi products, visit mytouchsmart.com.

Device Setup Guide

Follow these steps to set up your Wi-Fi smart device.

1. 1. Download the myTS App

   Download the myTS app from the Apple [App Store] or Google [Google Play] by searching for “myTS” or “myTouchSmart.”

2. 2. Create Account

   Enter your email address and create a password. Note: Read and agree to terms of service.

3. 3. Install Device

   Install the Wi-Fi Smart Dimmer following the provided wiring manual. The blue LED will blink quickly to indicate the device is ready to be added to your router network.

   Reset Procedure: If the LED is flashing slowly, slide the switch at the bottom to the left. While pressing the top rocker paddle, slide the switch to the right and hold the paddle for 10 seconds to reset the device. The LED will flash solid for 3 seconds and then begin flashing quickly. The device is now reset. Once connected to the router network, the rocker paddle can turn the connected light ON/OFF.

4. 4. Find New Device

   Tap "Find New Device" in the myTS app to connect your new Wi-Fi device.

5. 5. Wi-Fi Connection

   The app displays the phone's Wi-Fi network connection – this must be a 2.4GHz network. Enter the password for the Wi-Fi network and select "OK."

6. 6. Adding Device

   Once the device is discovered, select it and press "Connect."

   If the device is not discovered, the app will display "No new devices found." Verify your Wi-Fi password, ensure the dimmer's LED is blinking quickly, and confirm the Wi-Fi network is 2.4GHz. Select "OK" and repeat step 5.

   For information about your Wi-Fi network, check your router markings or contact your service provider.

   Further assistance is available in the FAQs [?] or by calling Jasco Consumer Care at 1-800-654-8483.