myTouchSmart Wi-Fi Smart Devices Installation and Setup Guide

Regulatory Information (FCC Statement)

This device complies with Part 15 of the FCC Rules and Industry Canada license-exempt RSS standards. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications. Such modifications could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee interference will not occur in a particular installation.

If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from the one the receiver is connected to.
• Consult the dealer or an experienced radio/TV technician for help.

CAN ICES-3(B)/NMB-3(B)

Getting to Know Your myTouchSmart App

The myTouchSmart app allows you to control your devices remotely and access various features.

Key App Features:

• Remote ON/OFF: Turn your connected devices on or off from anywhere.
• Edit Device Name and Picture: Personalize your devices for easy identification.
• Set ON/OFF Timer Programs: Schedule your devices to turn on or off automatically at specific times.
• Group Your Devices: Organize devices into groups for simultaneous control and programming. Add new groups using the [add] button. Connected devices must be turned on to be controlled by the app.

Voice Control Integration:

Control your myTouchSmart devices using voice commands with popular smart assistants.

Pairing with Amazon Alexa:

• Open the Amazon Alexa app.
• Enable the myTS skill [✔️].
• Ask Alexa to "Find new devices" to link your myTS devices.
• To add devices after initial setup, say, "Alexa, find new devices."

Pairing with Google Home:

• Open the Google Home app.
• Tap the [home icon] Home icon.
• Touch the [add icon] Add icon, then select "Set up device."
• Tap "Have something already set up?"
• Type "myTS" into the search bar, press the myTS icon, and follow the prompts [➡️] to complete setup.
• To add devices after initial setup, say, "Okay, Google, sync my devices."

For additional information, view the support tab in the myTS app [ℹ️].

Visit mytouchsmart.com for other myTS Wi-Fi products.

Available myTouchSmart Wi-Fi Products

The myTouchSmart line includes various smart devices:

• 40794: Wi-Fi In-Wall Smart Dimmer
• 40572: Wi-Fi Plug-in Smart Switch
• 40792: Wi-Fi In-Wall Smart Switch
• 40795: Wi-Fi In-Wall Smart Outlet

Installation Guide

READ IT OR WATCH IT: Read instructions or watch easy-to-follow videos. Scan QR code or visit bit.ly/2TPQZJS.

1. Download myTS App

   Download the myTS app from the Apple® App Store or Google Play Store by searching "myTS" or "myTouchSmart."

2. Create Account

   Enter your email address and create a password. Note: Be sure to read and agree to terms of service.

3. Install Device

   Install the Wi-Fi smart switch/outlet in the desired location. The blue LED will blink quickly [?] to indicate the device is ready to be added to your router network.

   Note: If the LED is flashing slowly, press the button for 10 seconds to reset the device [?]. The LED flashes solid for 3 seconds and begins to flash quickly. The device is now reset.

   Once connected to the router network, the button can turn the connected light on or off.

4. Find New Device

   Tap "Find New Device" [?] in the myTS app to connect your new Wi-Fi device.

5. Wi-Fi Connection

   The app displays your phone's Wi-Fi network connection. It must be a 2.4GHz network [?]. Enter the password for the Wi-Fi network and select "OK" [✔️].

6. Adding Device

   Once the device is discovered, select and press "Connect" [✔️].

   If the device is not discovered [❌], the app displays "No new devices found." Verify your Wi-Fi password [?], ensure the switch's LED is blinking quickly, and confirm the Wi-Fi network is 2.4GHz. Select "OK" [✔️] and repeat step 5.

   For information about your Wi-Fi network, check your router markings or contact your service provider.

   Further assistance is available in the FAQs [❓] or by calling our U.S.-based Consumer Care at 1-800-654-8483 [?].

7. Manual Setup

   If the connection fails [❌], the app prompts for manual setup. Tap "Manual" and follow the instructions. Refer to step 3 if the blue LED is not blinking quickly. When the device is reset and the LED flashes rapidly, follow the app's prompts for the specific button press process. The LED will flash in groups of three [...] to indicate the device is in manual setup mode.

Warnings and Specifications

Specifications:

125VAC 60Hz
15A general purpose / resistive
10A 1250W tungsten
1/2HP
2.4GHz
Works with LED, CFL, and incandescent bulbs.

Manufacturer and Warranty Information

Made in China

Distributed by Jasco Products Company LLC,
10 E. Memorial Rd., Oklahoma City, OK 73114.

This Jasco product comes with a 1-year limited warranty. Visit www.byjasco.com for warranty details.

Questions? Contact our U.S.-based Consumer Care at 1-800-654-8483 between 7 AM - 8 PM, M-F, Central Time.

Model: MTS5401

Patent Pending

Certifications: CULUS LISTED