Practical Assistant Method

Q1: How do I connect the floodlight camera to the "Smart Life" APP?

A1: You can connect the device using either of the following methods:

(1) Bluetooth Connection

1. Tap the ➕ button on the top right corner and tap [Add Device] to add the camera.
2. The APP will automatically search for the camera. After the camera appears, click [Add] to add the camera.
3. Enter your Wi-Fi password to join your network and click [Next].
4. Wait for the camera to register (about 20-30 seconds). When the blue LED indicator stops flashing and the camera says "Camera online", the connection is finished. Tap [Done] to complete the light pairing.

(2) QR Code Scan

1. Tap the ➕ button on the top right corner and tap [Add Device] to add the camera.
2. Tap [Camera&Lock] and then [Floodlight Camera] to proceed.
3. Tap the [Next] button to pair the LED Light.
4. Enter your Wi-Fi password to join your network and click [Next].
5. Place the QR code displayed on the APP in front of the camera at a distance of 15-20cm (5.9-7.87 inches). When you hear a [ding], click on [I Heard a Prompt].
6. Wait for the device to register (about 20-30 seconds). When the blue LED indicator stops flashing and the camera says "Camera online", the connection is finished.
7. Tap [Done] to complete the light pairing.

Q2: What steps do I follow to configure the sensing mode?

A2: First, activate both buttons. Then, select [Night Mode] and choose [Auto]. This setup allows the light to illuminate automatically at night upon detecting motion. Note that during the day, the light will not turn on, but the camera will still record.

Q3: How can I modify the sensitivity of the motion sensor light?

A3: If the light activates too often, you can decrease the sensitivity settings. Navigate to [Settings] > [Basic Function Settings] > [Detection Alarm Settings] > [Alarm Sensitivity Level].

Q4: Will the lights turn on during the day if motion is detected?

A4: The lights will not activate during the day when in sensing mode, even if motion is detected. You can manually turn on the light using the app by clicking [Light] to keep it on until you turn it off.

Q5: How can I manage motion detection notifications?

A5: If you want to keep motion detection enabled without receiving constant notifications, you can disable the notification push feature.

Method 1:

Go to [Settings] > [Notifications Settings] and toggle [App Notification] [ON] or [Off].

Method 2:

Go to [Settings] > [Detection Alarm Settings] and toggle [Motion Detection Alarm] [ON] or [Off].

Q6: How do I connect my 'Smart Life' account to Alexa?

A6:

1. Open the Amazon Alexa App. Access the side menu, tap [Browse Skills], then click [Skills & Games].
2. Search for 'Smart Life' skills.
3. Enable the 'Smart Life' skills.
4. Input your account information on the [Link Account] page.
5. Close the "Successfully Linked" window to find devices you can control with Alexa.
6. Arrange devices in specific rooms after [Discover Devices].
7. Customize Alexa settings as needed, such as turning on "Doorbell Press Announcement" for voice notifications when someone presses the doorbell.

Q7: What causes frequent disconnections, and how can I remedy this?

A7: Make sure your devices are located near the router and that there are minimal obstacles in between them.

Q8: Is customer privacy taken into account?

A8: Yes, we are committed to prioritizing and safeguarding customer privacy.

Q9: The sensor only detects motion directly beneath it. How can I enhance this?

A9: For optimal sensor performance, install the camera at a height of approximately 2.5m (8.2ft).

Q10: Do I need a monthly subscription for video playback?

A10: A subscription is only necessary for cloud storage; using an SD card (not included) allows for playback without a subscription.

Q11: Is the camera designed to resist water?

A11: Yes, it has an [IP65] waterproof status and can withstand both rain and snow. If the problem persists, please contact the seller and provide the camera's reference number.