Smart Life - Cat Eye Smart Lock

Network Setting

1. Please initialize the smart lock before use, and then carry out network distribution operation according to the operation guide.
2. Download and open the APP. Search the "Smart Life" APP in the App Store or scan the QR code provided to download and install the APP. The APP is subject to the actual released version.
3. Open the APP, create a new account or log in to an existing account.
4. Refer to the manual and enter the administrator user.
5. To add a device, first connect your phone to a 2.4G WiFi router.
6. Operate the smart lock: press the power key to wake up, then press the lock key. The screen prompts "Please verify the administrator user secret key". Verify the administrator user secret key to enter the menu.
7. Navigate the menu: "Settings" > "Advanced Settings" > "Configure Door Lock WIFI". The lock is now in the state of network distribution.
8. There are two ways to add a device to your APP:
   1. Automatic discovery: Open the mobile phone location, enter the APP and click "Automatic discovery", then "Start searching". Wait 1-3 minutes to receive the smart lock device and confirm the success of adding.
   2. Manual add: Open "security sensor", then "WIFI". Confirm that the door lock is in the state of network distribution. Enter the name and password of your WIFI, click "OK", and then enter the connection state. Wait 1-3 minutes, you will receive a device, click "OK" to complete network distribution.
9. After the network distribution is successful, the doorbell will trigger the remote unlock, and the mobile phone will receive a snapshot picture at the same time.
10. Trigger the doorbell and start the indoor cat eye screen simultaneously. Press the button at the bottom of the indoor screen while in sleep state to start and view the real-time video outside the door. Long press the button to close the indoor cat eye screen.