Smart Life Smart Camera User Manual

1. Product Introduction

Thank you for using the Smart Life smart camera.

[Smart Life Logo]

Packing List

• Smart Camera × 1
• Manual × 1
• USB Power Cord × 1
• Power Adapter × 1
• Screw Accessories Package × 1

Basic Parameters

Recommendation: It is recommended to insert an 8-128GB high-speed Micro TF card. Without it, the camera may not be able to store or view historical video, and important functions like firmware upgrading will not be supported.

Component Description

Reset Button: Long press the "reset" hole for 5 seconds to reset the device successfully.

2. Install APP

Download and Install

Scan the QR code below to download and install the "Smart Life" APP.

[QR code for Smart Life APP download]

Register and Login

Open the "Smart Life" APP and follow the on-screen prompts to register and log in.

3.1 Add The Device - QR Code Mode

Prerequisites:

• Ensure your Wi-Fi is available and connected to the Internet.
• Connect the camera to power. The system startup will be completed.

Note: Only 2.4 GHz Wi-Fi networks are supported.

Connection Steps:

1. Open the "Smart Life" APP. Press the '+' icon in the upper right corner of the main screen. (Illustration of the '+' icon on the APP main screen)
2. Choose "Security & Sensor", then click "Smart Camera" to add the camera. Click "Next step". (Illustrations showing APP navigation to add camera)
3. If your mobile phone is not connected to Wi-Fi, click "Connect to Wi-Fi". (Screenshot prompting Wi-Fi connection)
4. The interface will jump to the WLAN settings to connect to Wi-Fi. (Screenshot of WLAN connection interface)
5. If your phone is already connected to Wi-Fi, proceed. (Screenshot indicating phone is connected to Wi-Fi)
6. A QR code will be displayed on your screen. Aim the Smart Camera at the QR code on your mobile phone screen from a distance of approximately 20-30 cm. Then, click "hear the prompt sound". (Illustration of camera aiming at mobile phone QR code and prompt sound confirmation)
7. The status will show "connecting". (Screenshot showing connection status)
8. Once the connection is completed, click "Finish". (Screenshot showing connection completion)
9. The interface will then jump to the preview screen. (Screenshot of the camera preview interface)
10. After closing the device preview interface, the APP home page will be displayed. The connected device will appear on the home page. You can now click on the device to view the monitoring situation without needing to re-add it. (Screenshot of APP home page with connected device)

3.2 Add The Device - AP Mode

Set to Hotspot Distribution Network Mode

First, set the machine to the hotspot distribution network mode.

Locate the RESET button on the machine. Press and hold it for approximately 1 second. After about 1 minute, you will hear a sound, indicating the hotspot has started successfully.

[Illustration of the RESET button on the camera]

Connection Steps:

1. Select "AP Mode". (Screenshot showing AP Mode selection)
2. Click "Next". (Screenshot of the Next button)
3. Enter the account and password for the Wi-Fi network you want to connect to. (Screenshot of Wi-Fi credential input fields)
4. Click "Go Connect". (Screenshot of the Go Connect button)
5. Navigate to your phone's Wi-Fi settings and connect to the network named "Smartl IF-XXXX" (where XXXX is a unique identifier for your device). (Illustration showing phone connecting to the device's Wi-Fi hotspot)
6. The status will show "Connecting". (Screenshot showing connection status)
7. Click to complete the connection. (Screenshot of the completion button)
8. The video screen will appear, showing the live feed. (Screenshot of the live video feed)

4. Other Connection Methods

• QR Code: Camera aiming at the QR code displayed on the mobile phone.
• AP Mode: Mobile phone searches for the device's Wi-Fi hotspot signal.
• EZ Mode: Use the Mobile APP to search for the device via Wi-Fi.
• Cable: Connect using a USB cable.

5. Matters Need Attention

• Try to keep the camera away from metal spaces.
• Avoid placement where furniture or microwave ovens can block the view or signal.
• Keep the space around the camera clear of audio, video, and data lines.
• Ensure the camera is as close as possible to the coverage of your wireless Wi-Fi signal.
• If switching to a new network environment or experiencing connection issues, press the reset hole for approximately 5 seconds, then attempt to connect to the network again.

The name and content of the harmful substances in the product

This product conforms to RoHS environmental protection requirements. At present, there is no mature technology globally to replace or reduce the lead content in electronic ceramics, porcelain, optical glass, steel, and copper alloys.

This form is based on the provisions of SJ/T 11364. (○: Indicates that the content of the harmful substance in all homogeneous materials of the part is below the limit requirement. X: Indicates that the content of the harmful substance in at least one homogeneous material of the part exceeds the limit requirement.)

Maintenance Records

The following sections contain blank fields for maintenance records and customer information. These are typically filled out during service or upon purchase.

Maintenance Voucher of Intelligent Device

Customer Information:

• Customer Name: [Blank]
• Mobile: [Blank]
• Address: [Blank]
• Model: [Blank]
• Camera ID: [Blank]
• Device Store: [Blank]
• Date of Purchase: [Blank]
• Store Address: [Blank]
• Store Contact Number: [Blank]

Maintenance Details:

• Maintenance Time: [Blank]
• Fault Conditions: [Blank]
• Fault Cause: [Blank]
• Troubleshooting: [Blank]
• Return and Exchange Proof: [Blank]
• Date of Validity: [Blank]
• Original Device ID: [Blank]
• New Device ID: [Blank]
• Maintenance Personnel Signature: [Blank]
• Maintenance Department Seal: [Blank]

(Note: Multiple identical voucher sections were present in the original document, representing templates for recording maintenance history.)