TRAC-MASTER® T383L G2 24W LED DIMMING VERSIONS

Approved Acuity Dimming Systems

Electronic Low Voltage - Reverse Phase Dimming

Dimmable using Acuity nLight dimming controls when combined with an nLight nPP PCD EFP ELV or rPP PCD EFP G2 ELV Phase Adaptive Power Pack at the track input. Dimming range of 100% down to as low as 1% typical* with a minimum load of one fixture and maximum load of 1920W @ 120VAC.

*Typical dimming range based on laboratory evaluation - actual installation conditions and results may vary.

Approved Acuity & Non-Acuity Dimming Methods

Incandescent and Magnetic Low Voltage - Forward Phase Dimming

Dimmable with the use of most forward phase dimmers. Dimming range of 100% down to as low as 2% with a minimum load of one fixture and a maximum load of 50% of the dimmer rated load (see example); both dimming range and maximum rated load may vary depending on dimmer model.

Example: Fixture Rating = 24W
Dimmer Rating = 600W
Equivalent Incandescent Load (EIL) = 50%
(600/24W) X 0.5 = 12 Fixtures per Dimmer

Electronic Low Voltage - Reverse Phase Dimming

Dimmable with the use of most electronic low voltage dimmers. Electronic low voltage dimmers require a neutral wire in the wall box. Dimming range of 100% down to as low as 2% with a minimum load of one fixture and a maximum load of 75% of the dimmer rated load (see example); both dimming range and maximum rated load may vary depending on dimmer model.

Example: Fixture Rating = 24W
Dimmer Rating = 600W
Equivalent Incandescent Load (EIL) = 75%
(600/24W) X 0.75 = 18 Fixtures per Dimmer

Integrated Control Systems