JUNO TRAC-MASTER® D1.4.6
MR16 LED-COMPATIBLE LAMPHOLDERS
Model: T1040
Product Description
These low voltage fixtures offer both mechanical and electrical compatibility with most MR16 LED lamps (by others). Constructed with open or semi-open designs, this series provides for improved airflow around the lamp, leading to better cooling and optimized LED lamp life. They may also be used with MR16 halogen lamps with integral cover glass. The horizontal version has an integral transformer housing which is centered above the lampholder, offering a new and unique aesthetic in a small, close-to-the-trac fixture footprint.
Product Specifications
Construction
Lampholders are constructed of die cast aluminum. Transformer housings are constructed of molded polycarbonate.
Socket
GU5.3/GX5.3 ceramic bi-pin.
Lamp Compatibility
Compatible with most 12VAC MR16 LED lamps (by others) – contact lamp manufacturer to confirm transformer compatibility. Also compatible with 50W max. 12VAC MR16 halogen lamps with integral cover glass.
Transformer
Hatch RL12-60M-LED, 60VA, 12VAC solid state electronic. Integral to fixture in either horizontal or vertical orientation. ANSI/IEEE C62.41 Class A transient protection. Short circuit protection.
Dimming
Dimmable (with dimmable lamps) using Acuity nLight wired dimming controls, including Fresco controllers, when combined with an nLight nSP5 PCD ELV 120 Secondary Relay and Dimming Pack (required) at the trac input. Dimming range of 100% down to 1% typical* with a minimum load of one fixture and maximum load of 475W @ 120VAC. Also dimmable using a variety of standard wall box dimmers – contact lamp manufacturer to confirm compatibility.
Trac Adapters
- Juno Universal Trac Adapter: Universally compatible with both Trac-Master 1-circuit or 2-circuit trac, Trac-Lites trac, monopoints and special mountings. Also UL Recognized for use on ConTech® LT Series track. Copper alloy contacts provide precise spring action - no arcing and will not take a set. True, positive electrical ground. Spring-loaded positive latch with embossed polarity arrows secures trac light to trac. Two-position power contact provided for two-circuit application.
- Alternate GTYPE Trac Adapter: Compatible with track systems based on GES type track, including Lithonia LT Commercial Track (not LTS type). System specific and assembled to trac fixture. Consult factory for additional information.
- Alternate HTYPE Trac Adapter: Compatible with track systems which use a H-type track adapter, including Lithonia LTS Decorative Track (not LT type). System specific and assembled to trac fixture. Two-position power contact provided for two-circuit application. Consult factory for additional information.
- Alternate LTYPE Trac Adapter: Compatible with track systems which use a L-type track adapter. System specific and assembled to trac fixture. Two-position power contact provided for two-circuit application. Consult factory for additional information.
Aiming
90° vertical aiming capability and 358° rotation.
Labels
UL and C-UL Listed. Fixtures can be assembled with reduced maximum wattage rating labels to facilitate energy code compliance – consult factory. Union made. Assembled in U.S.A.
Government Procurement
BAA – Buy American Act: Product qualifies as a domestic end product under the Buy American Act as implemented in the FAR and DFARS. Product also qualifies as manufactured in the United States under DOT Buy America regulations.
BABA – Build America Buy America: Product qualifies as produced in the United States under the definitions of the Build America, Buy America Act. Please refer to www.acuitybrands.com/buy-american for additional information.
Warranty
3-year limited warranty. This is the only warranty provided and no other statements in this specification sheet create any warranty of any kind. All other express and implied warranties are disclaimed. Complete warranty terms located at: www.acuitybrands.com/support/warranty/terms-and-conditions
Notes
Actual performance may differ as a result of end-user environment and application. Specifications subject to change without notice. *Typical dimming range based on laboratory evaluation – actual installation conditions and results may vary.
Horizontal Lily16 Models
Catalog Number | Description | Finish | Lamp |
---|---|---|---|
T1040 H WH | Lily16 - Horizontal | White | 12V, 50W MR16 max. |
T1040 H BL | Lily16 - Horizontal | Black | 12V, 50W MR16 max. |
T1040 GTYPE H WH | Lily16 - Horizontal w/G-Type Trac Adapter | White | 12V, 50W MR16 max. |
T1040 GTYPE H BL | Lily16 - Horizontal w/G-Type Trac Adapter | Black | 12V, 50W MR16 max. |
T1040 HTYPE H WH | Lily16 - Horizontal w/H-Type Trac Adapter | White | 12V, 50W MR16 max. |
T1040 LTYPE H WH | Lily16 - Horizontal w/L-Type Trac Adapter | White | 12V, 50W MR16 max. |
T1040 LTYPE H BL | Lily16 - Horizontal w/L-Type Trac Adapter | Black | 12V, 50W MR16 max. |
Accessories
Cat. No. | Description |
---|---|
T40N1 | Monopoint Canopy |
1 Add finish code to complete catalog number (Example: T40N WH).
Other accessories can be found on specification sheet D1.2.0.
Dimensions
The lampholder has a width of approximately 4 5/16 inches and a depth of approximately 2 7/16 inches.
A visual representation shows a compact, horizontal lampholder designed for track mounting.