Bestway Lay-Z-Spa Bahamas Airjet™

Product Overview & Features

The Lay-Z-Spa Bahamas Airjet™ offers a relaxing spa experience with its Airjet™ Massage System and Freeze Shield™ Winterizing System. It features:

• Airjet™ Massage System: Provides a soothing bubble massage.
• Freeze Shield™: Helps protect the spa during colder temperatures.
• Setup Time: Designed for quick and easy setup with no tools required.
• Capacity: Accommodates multiple users.
• Dimensions: 180cm x 66cm (71" x 26").
• Water Capacity: 669 Liters (177 gal).
• Material: Features a foam bottom, sturdy I-beam construction, and a wood-effect printing.
• Key Features: Water Filtration, Power Saving Timer, Maximum Temperature of 40°C (104°F), Mosaic Printing interior, Heating, and a Drain Pipe.
• Includes: Filter Cartridge (60311), Inflatable Cover, and ChemConnect™ Dispenser.

Important Safety Instructions

General Safety:

• Read and follow all instructions before setup and use.
• Operate the whirlpool with a residual current device (RCD) with a trip current not exceeding 30 mA.
• Connect the whirlpool via a power cord with plug and PRCD to a grounded socket with a rated residual current of 10 mA.
• Test the pump before each use.
• If the power cord is damaged, it must be replaced by the manufacturer, service agent, or qualified personnel to avoid electric shock.
• Do not use extension cords; use a nearby socket.
• Ensure no part of the electrical equipment is over the whirlpool during use.
• Electrical components must be secured to prevent them from falling into the whirlpool.
• Connect to a grounded power source. The power source should be more than 4 meters away from the pool.
• Keep the power plug dry and never insert a wet plug into the socket.
• The power plug must be connected directly to a permanently installed socket.
• The socket must remain accessible after the whirlpool is set up.
• Do not operate the unit with an external switching device like a timer or connect it to a circuit that is regularly switched on and off by the utility.
• After 3-5 years of use, contact a qualified technician for safety and operational checks.

Electrical Safety:

• The whirlpool is protected by a PRCD in the power cord. If a fault current of more than 10 mA occurs, the device will interrupt the power supply. Do not attempt to reset the PRCD yourself; contact a service technician.
• Ensure your power supply is suitable for the pump's requirements.
• Using extension cords or multi-way adapters can cause overheating and damage.
• The whirlpool is a Class 1 electrical appliance and must be connected directly to a grounded socket.
• Use only moisture-protected sockets that can withstand high loads.
• Regularly inspect the plug and socket for damage.
• Test the PRCD plug before each use to prevent electric shock. Do not use the pump if the test fails.

Usage Safety:

• Do not use the whirlpool during thunderstorms or lightning.
• Do not wear contact lenses while using the whirlpool.
• Do not use the whirlpool during chemical treatment.
• Do not use extension cords.
• Do not touch the power plug with wet hands when plugging or unplugging.
• Disconnect the unit from the power supply before cleaning or maintenance, and when unattended during holidays.
• Store the unit indoors during long periods of non-use (e.g., winter).
• Use only manufacturer-approved accessories.
• Place the whirlpool on a non-slip surface, free from sharp objects.
• Do not place electrical devices (lamps, phones, radios, TVs) within 2 meters of the whirlpool.
• Always read instructions when setting up, using, or reassembling.
• Keep instructions for future reference. Contact the manufacturer if lost.
• Children aged 8 and above, and persons with reduced physical, sensory, or mental capabilities, can use the device if supervised or instructed by a responsible person. Children must not play with the device.
• Cleaning and maintenance must be done by adults over 18 years old familiar with the hazards.
• Water is attractive to children; always attach the cover after use.
• Do not bury cables; route them to avoid damage from lawnmowers or shears.
• DANGER - Drowning: Prevent unsupervised access by children, especially under 5 years old. Ensure adult supervision at all times during use.
• Injury Hazard: Suction fittings are designed for specific flow rates. If replaced, ensure compatibility. Never operate with defective or missing suction fittings. Never replace a fitting with one that has a lower flow rate.
• Injury Hazard: Do not operate with defective or missing inlet/outlet hoses. Contact customer service for replacements.
• Electric Shock Hazard: Position at least 2 meters away from metal surfaces. Do not operate electrical devices with wet hands or while in the whirlpool. Do not place electrical devices within 2 meters of the whirlpool.
• Pregnancy Warning: Prolonged immersion in hot water can harm the fetus. Limit use to 10 minutes. Pregnant women should limit water temperature to 38°C (100°F).
• Health Warnings: Consult a doctor before use if you have heart conditions, high/low blood pressure, circulation problems, diabetes, or are taking medication that may cause drowsiness or affect heart rate/blood pressure.
• Do not submerge your head in the water.
• Do not swallow pool water.
• Consuming alcohol, drugs, or medication can lead to unconsciousness and drowning.
• Hyperthermia (overheating) can be dangerous. Symptoms include dizziness, lethargy, drowsiness, and fainting.
• Ensure electrical installations comply with national standards.
• Use caution, common sense, and good judgment during water activities.
• Non-Swimmer Safety: Constant, active supervision by a capable adult is required, especially for weak or non-swimmers. Remove all toys from the pool and its surroundings when not in use or unsupervised.
• Safety Features: Use a safety cover or other safety measures to prevent unauthorized access. Safety covers, barriers, and alarms are aids, not substitutes for adult supervision.
• Safety Equipment: Keep rescue equipment (e.g., a life buoy) and a functional telephone with emergency numbers nearby.
• Encourage users, especially children, to learn to swim. Learn CPR and refresh knowledge regularly. Instruct all users on emergency procedures.
• Never jump into shallow water.
• Do not use the whirlpool under the influence of alcohol or medication.
• Remove covers completely before use.
• Maintain water quality and hygiene according to the user manual to prevent waterborne diseases.
• Keep chemicals out of reach of children.
• Use provided warning signs.
• Store removable ladders safely to prevent children from climbing.

Setup and Installation

Checking Parts: Verify all components before use. Contact Bestway customer service for any damaged or missing parts.

PRCD Test: Before connecting the plug:

1. Plug in the device.
2. Press the 'RESET' button; the indicator light should turn on.
3. Press the 'TEST' button; the indicator light should turn off.
4. Press the 'RESET' button again; the indicator light should turn on.
5. Press the 'On/Off' button for two seconds to make the pump operational.

Potential Equalization Terminal: It is recommended to have a qualified electrician connect the whirlpool pump using a 2.5 mm² copper conductor with a potential equalization terminal.

Inflation:

• Air may escape where the hose connects to the pump; this is normal.
• Do not cover the holes at the bottom of the inflation hose, as this can over-inflate and damage the material.
• Do not use an air compressor for inflation.
• Avoid dragging the pool over rough ground to prevent damage to the pool liner.

Air Valve Check: Ensure the air valve seals tightly before inflating. If loose, tighten it with the provided wrench.

Location:

• The chosen location must be able to support the expected load.
• An appropriate drainage system is required for indoor and outdoor setups to handle overflow.
• For indoor setup, ensure good ventilation and dehumidification. Avoid placing on carpet or porous materials that absorb moisture or can be damaged by chemicals.
• For outdoor setup, place near a drain as water may leak during filling, emptying, or use. Avoid prolonged direct sunlight.
• Ensure at least 1 meter of clear space around the whirlpool.
• Consult local authorities regarding water usage and safety regulations (fencing, lighting).

Draining and Storage:

• Follow the instructions for draining the whirlpool.
• Ensure the whirlpool is completely dry before storage to prevent mold.
• For specific models (Paris, Bali), drying the air chamber may take up to 25 hours.
• When lifting the pool, handle it carefully; damage to handles is not covered by warranty.
• Store the cover on a clean, dry surface, away from direct sunlight or potential damage.

Operation

Control Panel Functions:

• Lock/Unlock Button: Activates/deactivates the control panel.
• Energy Saving Timer: Allows setting a delay for the heating cycle.
• Heater Button: Activates the heating system. The indicator light is red when heating, green when the target temperature is reached. The filter runs automatically when the heater is on.
• Massage System Button: Activates the bubble jets. Features a 30-minute auto-shutoff. Do not activate with the cover on.
• Temperature Adjustment Buttons (Up/Down): Set the desired water temperature between 20°C (68°F) and 40°C (104°F).
• On/Off Button: Activates/deactivates the control panel and all functions.
• Celsius/Fahrenheit Switch: Selects temperature display unit.
• Water Filter Button: Turns the filter pump on/off. The indicator light is red when the filter is active.

Heating:

• The heating effectiveness depends on ambient temperature and whether the cover is used.
• Allow at least one minute for the filter to run to display the current water temperature accurately.
• Water temperature measured by an external thermometer may differ by up to 2°C from the display.

Winter Use (Freeze Shield™):

• The Freeze Shield™ system maintains water temperature between 6°C and 10°C to prevent freezing.
• The heater will run continuously if the water temperature drops below 6°C.
• If the Freeze Shield™ system is not working, check for error messages.
• Do not use the whirlpool if the ambient temperature drops to -10°C.
• If leaving for an extended period when temperatures may drop below 6°C, drain and store the whirlpool.

Heating Reset: If the temperature does not change after 4-5 hours of heating, press the RESET button on the pump with a thin object to restart the system. The heater may not operate if the ambient temperature is above 40°C or if exposed to direct sunlight.

Heating Time: Estimated heating times to reach 40°C (104°F) vary based on initial water and ambient temperatures. Covering the spa significantly reduces heating time.

Power Consumption:

• Power Supply: 220-240 V AC, 50 Hz, single phase.
• Pump: 2050 W (at 20°C).
• Massage Blower: 800W.
• Heater: 2,000W (at 20°C).
• Water Pump: 50W.

Maintenance

General: Always disconnect the pump from the power supply before performing maintenance.

Refilling Air: Periodically check and refill air in the whirlpool as needed, as temperature changes can affect pressure.

Cover Care: Clean the cover regularly on both sides with a suitable cleaning solution, preferably one with disinfecting properties (e.g., 10 mg/l free chlorine).

Filter Cartridge Maintenance:

• Inspect and clean filter cartridges daily.
• Replace filter cartridges weekly, or sooner if they remain dirty or discolored.

Water Treatment:

• Clean the pool regularly to prevent bacteria, algae, and mold growth.
• Replace the water completely and clean the pool periodically based on usage and water condition.
• Use pool chemicals to maintain water balance and hygiene. Recommended levels: pH 7.4-7.6, Alkalinity 80-120 mg/l, Free Chlorine 2-4 mg/l.
• Pool chemicals are potentially toxic; handle with care. Store chemicals properly and follow manufacturer instructions.
• Damage from chemical misuse or incorrect water treatment is not covered by warranty.
• Avoid direct contact of chemicals with the pool surface, as it can cause damage and discoloration.
• Remove the ChemConnect™ dispenser while using the whirlpool.
• Test water chemistry after maintenance before use.

Troubleshooting

Refer to the manual for specific error codes and troubleshooting steps. Common issues may relate to heating, filtration, or the control panel.

Contact & Support

For questions, problems, or missing parts, visit www.bestwaycorp.com/support or contact Bestway customer service.

Visit the Bestway YouTube channel for instructional videos.