Bestway Lay-Z-Spa AirJet Series User Manual & Safety Guide
This guide provides essential information for the safe installation, operation, maintenance, and troubleshooting of your Bestway Lay-Z-Spa AirJet series hot tub.
Key Safety Information
Read all instructions before use. Failure to follow these warnings may result in serious injury or death.
- Installation: Place on a flat, stable, load-bearing surface. Consult an engineer for weight capacity. Avoid slopes and loose ground. ⚠️
- Sunlight: Do NOT install under direct sunlight. ☀️
- Electrical: Use grounded outlets with GFCI/RCD protection (max 30mA). Keep connections dry. Do NOT use extension cords. ⚡?
- Usage: For private use only. Do NOT use during thunderstorms ⛈️ or alone.
- Health: Consult a doctor if pregnant or have health conditions. Limit water temperature to 40°C (104°F). Avoid alcohol/drugs. ?
- Children: Constant adult supervision is mandatory. ?
- Water Safety: Always cover the spa when not in use.
- Chemicals: Handle with care. Add chemicals to water.
- Freeze Shield™: Protects against freezing below 6°C, maintaining water between 6°C-10°C.
Installation & Setup
- Site Selection: Flat, stable ground, away from direct sunlight.
- Inflation: Use the provided electric or manual pump. Do NOT use compressors.
- Filling: Fill with water to the indicated level.
- Connections: Connect pump, heater, and filter securely.
- PRCD Test: Perform a PRCD test before initial use.
Operation
The control panel manages:
- Power: On/Off button.
- Temperature: Adjust water temp (up/down).
- Heating: Activates water heating.
- Bubbles: Air massage jets (auto-off after 30 mins).
- Filter: Water filtration system.
- Timer: Schedule heating.
- LED Lighting: (On applicable models) Remote control for lights.
Maintenance & Water Care
- Filter: Rinse daily, replace every 1-2 weeks.
- Water Chemistry: Maintain pH (7.4-7.6) and sanitizer levels with appropriate chemicals.
- Cleaning: Clean spa liner and cover regularly.
- Storage: Ensure spa is dry before storing in a cool, dry place.
Troubleshooting
Common issues include power loss, no heating, leaks, dirty water, and error codes (e.g., E02, E03, E04, E05, E08). Refer to the full manual for detailed solutions.
Models & Specifications
The Lay-Z-Spa AirJet series includes various models (e.g., Miami, Cancun, Bali, Paris, Hawaii) with different sizes and capacities. Key specs include heating rates of 1.5-2°C/h and max temperatures of 40°C.
Warranty & Support
Bestway offers a limited warranty (12 months for pump/heater, 6 months for liner). For support, parts, or warranty claims, visit bestwaycorp.com/support ?.
