Fenton FT10LED Portable System

Important Safety Precautions

Please read this manual thoroughly prior to using the unit to benefit fully from all features. Follow the instructions to avoid invalidating the warranty. Take all precautions to avoid fire and/or electrical shock. Repairs must only be carried out by a qualified technician.

• Keep the manual for future reference.
• Ask advice from a specialist before using the unit. A slight smell may occur upon first use, which is normal.
• The unit contains voltage-carrying parts; do NOT open the housing.
• Do not place metal objects or pour liquids into the unit, as this may cause electrical shock and malfunction.
• Do not place the unit near heat sources, on vibrating surfaces, or cover ventilation holes.
• The unit is not suitable for continuous use.
• Be careful with the mains lead; a faulty or damaged lead can cause electrical shock and malfunction. Always pull the plug, never the lead, when unplugging. Do not plug or unplug with wet hands.
• If the plug or mains lead is damaged, it must be replaced by a qualified technician.
• If the unit is damaged and internal parts are visible, do NOT plug it in or switch it on. Contact your dealer.
• Do NOT connect the unit to a rheostat or dimmer.
• To avoid fire and shock hazard, do not expose the unit to rain and moisture.
• All repairs should be carried out by a qualified technician only.
• Connect to an earthed mains outlet (220-240Vac/50Hz) protected by a 10-16A fuse.
• During thunderstorms or long periods of non-use, unplug the unit from the mains.
• If the unit has not been used for a long time, condensation may occur. Let it reach room temperature before switching on. Never use in humid rooms or outdoors.
• Follow applicable guidelines and instructions to prevent accidents in companies.
• Do not repeatedly switch the unit on and off; this shortens its lifespan.
• Keep the unit out of the reach of children. Do not leave the unit unattended.
• Do not use cleaning sprays on switches; they can cause dust and grease deposits. Seek specialist advice for malfunctions.
• Do not force controls.
• Keep the unit at least 60cm away from computers or TVs due to potential magnetic fields.
• If the unit has a built-in lead-acid rechargeable battery, recharge it every 3 months if not used for a long period to prevent permanent damage. Replace damaged batteries with identical specifications and dispose of them environmentally.
• If the unit has fallen, have it checked by a qualified technician before switching it on again.
• Do not use chemicals to clean the unit, as they can damage the varnish. Clean only with a dry cloth.
• Keep away from electronic equipment that may cause interference.
• Use only original spare parts for repairs to avoid serious damage and/or dangerous radiation.
• Switch off the unit before unplugging it from mains or other equipment. Unplug all leads and cables before moving the unit.
• Ensure the mains lead cannot be damaged by people walking on it. Check the mains lead for damages and faults before every use.
• The mains voltage is 220-240Vac/50Hz. Check if your power outlet matches. If traveling, ensure the country's mains voltage is suitable.
• Keep original packing material for safe transport.

⚠️ This mark indicates high voltages that can cause a shock hazard.

❗ This mark indicates important instructions in the manual that must be read and adhered to.

The unit is CE certified. Unauthorized changes will invalidate the CE certificate and guarantee.

NOTE: For normal operation, use the unit in rooms with temperatures between 5°C/41°F and 35°C/95°F.

Electric products must not be disposed of as household waste. Please take them to a recycling centre. Check local authorities or your dealer for disposal procedures. Specifications are typical and may vary slightly between units. Specifications are subject to change without prior notice.

Unpacking Instructions

CAUTION! Carefully unpack the box upon receipt. Check contents to ensure all parts are present and in good condition. Notify the shipper immediately and retain packaging material if any parts appear damaged or the package shows signs of mishandling. Save the package and all packaging materials. If the product must be returned, it is important that it is returned in the original factory box and packaging. If the device has been exposed to drastic temperature fluctuations (e.g., after transportation), do not switch it on immediately. Condensation water may damage your device. Leave the device switched off until it has reached room temperature.

Power Supply

The label on the back/underside of the product indicates the mains voltage to which it must be connected. Check that the mains voltage corresponds to this. Any other voltage than the one indicated may cause irreparable damage. The unit must be connected directly to the mains voltage; no dimmer or adjustable power supply may be used.

❗ Always connect the device to a protected circuit (circuit breaker or fuse). Ensure the device has appropriate electrical grounding to avoid the risk of electrocution or fire.

Controls and Connections

The unit features several input and output connections and controls:

Control Panel Layout:

• 1. Mic In: 6.3mm jack for connecting a microphone.
• 2. AUX: 3.5mm Jack input for connecting units with line level (e.g., CD/MP3/DVD player, Hi-Fi system, PC).
• 3. USB Port: Connect your USB device here to play music in MP3 or WMA format.
• 4. SD Port: Slot to insert a Micro SD card.
• 5. ECHO: Rotate this knob to adjust the Echo level.
• 6. MIC VOL: Rotate this knob to adjust the Microphone volume level.
• 7. Master Volume: Rotate to turn the power on/off. Rotate this knob to adjust the overall output level of the portable sound system.
• 8. Mediaplayer Controls:
  • LED: Press to switch between different LED modes. Press and hold to switch the light mode on/off.
  • MP3/AUX/BT-MODE: Press to switch between modes. Press and hold to disconnect Bluetooth (BT).
  • Previous Track / VOL-: Press for the previous track in MP3/BT mode. Press and hold to decrease volume.
  • Play/Pause: Press to pause/play in MP3/BT mode. Press and hold to enable stereo pair (LINK) in BT mode.
  • Next Track / VOL +: Press for the next track in MP3/BT mode. Press and hold to increase volume in MP3/BT mode.
• 9. AC Connection and Fuse Holder: This connector supplies main power. See "Replacing the Fuse" for instructions on changing the fuse.

Remote Control (for Mediaplayer only)

The remote control allows operation of the media player functions:

• 1. Power: Press to turn the unit on/off.
• 2. MODE: Press to change between different modes.
• 3. REC: Press to start/stop recording.
• 4. REP: Press to repeat the recording.
• 5. Vol +/-: Press to decrease/increase volume.
• 6. : Press to start/resume or pause playback.
• 7. / : Press for Previous/Next track.
• 8. RPT: Press to repeat a single music track or repeat all tracks.
• 9. EQ: Press to change to a different preset equalizer.
• 10. Num pad: Numeric keypad for direct track selection.

Operations Instructions

Ensure the volume control is set to minimum before connecting power. Plug the AC cord into the unit's AC input jack and then into an AC power outlet. Turn on the unit using the main power switch.

Rechargeable Battery

The unit can be powered internally by its built-in rechargeable battery. When AC power is connected, the CHARGE LED indicator will light red, indicating the battery is charging. A green FULL LED indicator means the battery is fully charged and ready to power the unit independently.

To use the battery power, turn off the power switch and disconnect the AC power. Then turn the unit back on. Note: Turning off the unit's power switch allows the battery to charge more quickly.

ATTENTION:

• Before first use, charge the battery for at least 12 hours and a maximum of 72 hours.
• Recharge the battery regularly. For optimal battery life, charge it at least once a month.
• If the battery is not charged within 6 weeks, it may become defective.

UHF Wireless Microphone

Insert batteries into the wireless microphones, observing polarity. Turn all volume controls down. Switch the system to 'ON'; the power LED will light. Switch the microphone to 'ON' and set the volume knobs to the desired position. Avoid feedback by adjusting Echo and equalizer settings for optimal sound.

BT Connection

1. Activate Bluetooth on your device (mobile phone, tablet, etc.) from which you want to play music.
2. Refer to your device's operating instructions.
3. Press the [MODE] button to activate the BT function.
4. Select "Fenton – FT10LED" on your BT device and pair.
5. Press and hold the [MODE] button to disconnect the BT.

Attention: BT distance is approximately 10 meters without any barrier.

LINK/STEREO (TWS) Pairing Function

If you have two Fenton FT10LED speaker systems, you can link them for stereo pairing. Both systems will emit the same signal from the audio streaming function. Follow these steps:

1. Turn on both "Fenton – FT10LED" speaker systems.
2. Change the operating mode to BT streaming on both systems.
3. Press and hold [ ] on one speaker to pair it with another speaker. The speaker will emit a sound when connection is completed.
4. Press and hold [ ] to disconnect.

AUX IN

The AUX IN mode plays audio from an external source like MP3 players. To avoid sudden loud volume, turn down the volume on both this device and the source device (if adjustable). To enter AUX IN mode, press the [MODE] button. Adjust the volume as needed.

Replacing the Fuse

If the fuse is defective, replace it with one of the same type and value. Unplug the mains lead before replacing the fuse.

Procedure:

1. Step 1: Open the fuse holder on the rear panel with a screwdriver.
2. Step 2: Remove the old fuse.
3. Step 3: Install the new fuse.
4. Step 4: Replace the fuse holder in the housing.

UHF License Information

UHF: No license required (excluding geographical restrictions).

Countries: Belgium (BE), Denmark (DK), France (F), Finland (FI), Germany (DE), Hungary (HU), Italy (IT), Netherlands (NL), Norway (NO), Poland (PL), Portugal (PT), Romania (RO), Slovenia (SI), Spain (ES), Sweden (SE), Switzerland (CH), Great Britain (GB).

Compliance Information

The products referred to in this manual conform to the European Community Directives to which they are subject.

European Union: Tronios B.V., Bedrijvenpark Twente Noord 18, 7602KR Almelo, The Netherlands. Conforms to 2014/35/EU, 2014/30/EU, 2011/65/EC, 2014/53/EU. (CE mark)

United Kingdom: Tronios Ltd., 130 Harley Street, London W1G 7JU, United Kingdom. Conforms to S.I. 2016:1101, S.I. 2016:1091, S.I. 2012:3032, S.I. 2017:1206. (UKCA mark)

General Information

Specifications and design are subject to change without prior notice.

www.tronios.com

Copyright © 2024 by Tronios The Netherlands