Fenton KAR50 Karaoke Speaker with LED Light Effect

Safety Precautions

• Read the manual prior to using the unit.
• Follow instructions to avoid invalidating the warranty.
• Take all precautions to avoid fire and/or electrical shock.
• Repairs must only be carried out by a qualified technician.
• Keep the manual for future reference.
• Ask advice from a specialist before using the unit.
• A slight smell may occur on first use, which is normal and will disappear.
• Do not open the housing as it contains voltage carrying parts.
• Do not place metal objects or pour liquids into the unit to prevent electrical shock and malfunction.
• Do not place the unit near heat sources or on vibrating surfaces. Do not cover ventilation holes.
• The unit is not suitable for continuous use.
• Be careful with the mains lead and do not damage it.
• When unplugging, pull the plug, never the lead.
• Do not plug or unplug with wet hands.
• If the plug or mains lead is damaged, it must be replaced by a qualified technician.
• If the unit is damaged and internal parts are visible, do NOT plug it in or switch it on. Contact your dealer.
• Do NOT connect the unit to a rheostat or dimmer.
• Do not expose the unit to rain and moisture.
• All repairs should be carried out by a qualified technician only.
• Connect to an earthed mains outlet (220-240Vac/50Hz) protected by a 10-16A fuse.
• Unplug during thunderstorms or if not used for a long period.
• If the unit has not been used for a long time, condensation may occur. Let it reach room temperature before switching on.
• Never use the unit in humid rooms or outdoors.
• Follow applicable guidelines and instructions to prevent accidents in companies.
• Do not repeatedly switch the fixture on and off.
• Keep out of reach of children. Do not leave unattended.
• Do not use cleaning sprays on switches.
• Do not force controls.
• Keep the unit at least 60cm away from computers or TVs due to magnetic fields.
• If the product has a built-in lead-acid rechargeable battery, recharge it every 3 months if not in use.
• If the battery is damaged, replace it with the same specifications and dispose of it environmentally friendly.
• If the unit has fallen, have it checked by a qualified technician before switching it on again.
• Do not use chemicals to clean the unit; use a dry cloth only.
• Keep away from electronic equipment that may cause interference.
• Use only original spares for repairs.
• Switch off the unit before unplugging. Unplug all leads and cables before moving.
• Ensure the mains lead cannot be damaged by people walking on it. Check the mains lead for damage before every use.
• Check if your power outlet matches the mains voltage (220-240Vac/50Hz).
• Keep original packing material for safe transport.
• The symbol ⚡ indicates high voltage inside the housing.
• The symbol ⚠️ indicates important instructions in the manual.
• The unit has been certified CE. Do not make any changes to the unit.
• NOTE: Operate the unit in temperatures between 5°C/41°F and 35°C/95°F for normal function.
• Electric products must not be put into household waste. Bring them to a recycling centre.

Unpacking Instructions

Carefully unpack the box upon receipt. Check contents for completeness and condition. Notify the shipper immediately and retain packing material if any parts appear damaged or the package shows signs of mishandling. Save the package and all packing materials. If the product must be returned, it must be in the original factory box and packing.

If the device has been exposed to drastic temperature fluctuations (e.g., after transportation), do not switch it on immediately. Allow the device to reach room temperature before switching it on to prevent damage from condensation.

Power Supply

Check the label on the backside of the product for the correct power supply type. Ensure the mains voltage corresponds to the specified voltage, as other voltages can cause irreparable damage. The product must be directly connected to the mains and not used with a dimmer or adjustable power supply.

Always connect the device to a protected circuit (circuit breaker or fuse). Ensure the device has appropriate electrical grounding to avoid the risk of electrocution or fire.

Controls and Connections

Wired Microphone Operation

Insert the 6.3mm jack of the microphone cable into the microphone input.

1. Press the "Volume" button and switch the indicator light to "MIC VOL", then adjust mic volume.
2. Press the "Volume" button and switch the indicator light to "MIC ECHO", then adjust mic echo.

Link/Stereo (TWS) Pairing Function

This function allows you to connect two FENTON KAR speakers wirelessly and play music from the same source simultaneously. To connect two speakers:

1. Power on both speakers and set them to BT mode.
2. Pair your phone/tablet to the first speaker normally.
3. After successful connection, double-click the [Pause/Play/LINK] button. You will hear a sound on the second speaker, indicating successful TWS connection.

BT Connection

1. Activate Bluetooth on your device (mobile phone, tablet, etc.) from which you want to play music. Refer to the device's operating instructions.
2. Press the [MODE] button to activate BT function.
3. Select "FENTON KAR" on your BT device and pair.

Attention: BT distance is approximately 10 meters without any barrier.

Product Information

This mark attracts the user's attention to high voltages present inside the housing that are sufficient to cause a shock hazard.

This mark attracts the user's attention to important instructions contained in the manual that should be read and adhered to.

The unit has been certified CE. It is prohibited to make any changes to the unit, as this would invalidate the CE certificate and guarantee.

NOTE: For normal operation, the unit must be used in rooms with a temperature between 5°C/41°F and 35°C/95°F.

Electric products must not be disposed of with household waste. Please take them to a recycling centre. Ask your local authorities or your dealer for disposal procedures. Specifications are typical and may vary slightly between units. Specifications are subject to change without prior notice.

Do not attempt to make any repairs yourself, as this will invalidate your warranty. Do not make any changes to the unit, as this will also invalidate your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings contained in this manual. Fenton cannot be held responsible for personal injuries caused by a disrespect of the safety recommendations and warnings. This also applies to all damages in whatever form.