Baby Trend PY81 Nursery Center
Instruction Manual
Parts List
Item#: / ART. N.º: / Nombre D' article: PY81128
- 1. Playard (fully assemble) / Corralito (armado completo) / Parc (entièrement assemblé)
- 1. Mattress / Colchón / Matelas
- 1. Bassinet with metal support tubes / Cuna con tubos metálicos de soporte / Couchette avec le support métallique tubes
- 1. Changing table / El Cambiador / Table à langer
- 2. Long Curved Bar / Barras curvadas largas / Longue barre courbe
- 2. Short Bar with Connector Knob / Barras cortas con Perillas conectora / Barre courte avec connecteur boutons
- 1. Travel / Storage Bag / Bolsa de viaje y portaobjetos / Sac de transport ou de rangement
- 1. Diaper Stacker / Portapañales / Pochette de diaper
- 1. Mobile Lower Arm / Brazo inferior de móvil / Bras inférieur pour mobile
- 1. Mobile Arm Holder / Soporte de brazo de móvil / Attache pour bras de mobile
- 1. Mobile Upper Curved Arm / Brazo curvo superior de móvil / Bras courbé supérieur pour mobile
- 1. Mobile Tri-shaped Arm / Brazo triple de móvil / Bras tri-forme pour mobile
- 3. Toy Animal / Animalitos de juguete / Jouet Animal
Note: Toys and mobile may vary.
Important Safety Warnings
Read all instructions BEFORE assembly and USE. Keep instructions for future use.
General Safety:
- Always provide necessary supervision for child's safety. Never leave child unattended when used for playing.
- To reduce the risk of SIDS, place infants on their back to sleep, unless advised by a physician.
- Never leave child in product with sides lowered. Ensure sides are raised and locked.
- Never use plastic shipping bags or plastic film as mattress covers; they can cause suffocation.
- This product is not intended for commercial use.
- Always ensure the playard and changing table are secure by checking all parts are properly in place before use.
- Never use if parts are loose, missing, broken, or torn. Contact Baby Trend Customer Service at 1-800-328-7363 for replacement parts. Never substitute parts.
Suffocation Hazards:
- Infants can suffocate in gaps between a mattress that is too small or too thick and product sides, or on soft bedding. Never add extra mattresses, pillows, comforters, or padding. Use only the manufacturer-provided mattress. Never use a water mattress.
- Child can become entrapped and die if improvised netting or covers are placed on the playard. Never add such items.
Strangulation Hazards:
- Strings can cause strangulation. Never place items with strings around a child's neck (e.g., hood strings, pacifier cords). Never suspend strings over the playard or attach strings to toys.
- Never place product near a window where cords from blinds or drapes can strangle a child.
Fall Hazards:
- Discontinue use when child can climb out, reaches 35 in. (890 mm) or 30 lbs. (14 kgs), whichever comes first.
- When child can pull to standing, remove bumper pads, large toys, and other objects that could serve as steps for climbing out.
- For changing table use, always use the safety belt and stay within arm's reach of the child.
- Check that the bassinet is securely locked on the base/stand.
Assembly Instructions
Playard Assembly
To Assemble Playard:
- Step 1: Unzip the bag and remove the playard frame. Undo the two (2) fastener straps and set the mattress aside. Do not push the center down yet.
- Step 2: Ensure all four (4) top rails are fully erected and locked. Pull up one rail at a time, holding one hand on each side of the rail and pulling up sharply. Do not pull from the center latch release. Ensure both tubes latch and the rail is rigid. The center handle must remain raised for the rails to lock. If you experience difficulty, contact customer service.
- Step 3: Once all four top rails are locked, push down on the center handle. The center mechanism will rotate 90 degrees clockwise and lock. Test each top rail by pushing down slightly to confirm it is rigid and secure.
- Step 4: Place the mattress on the playard floor with the padded side facing up.
- Step 5: Insert the hook and loop fasteners from the mattress underside through the slots in the floor. Fasten the straps to the underside of the playard floor to prevent the mattress from moving.
Folding Playard:
- Step 7: Release the mattress fasteners from underneath the playard floor. Do not unlock top rails yet; the center must be raised first. Rotate the center handle counter-clockwise 90 degrees and raise the center as high as the top rails. Gather the legs and wheels towards the center.
- Step 8: Locate the rail latch release in the center and bottom of each rail. Squeeze the lever with two hands until the rail releases the two tubes, then push down. Ensure both tubes release for the top rail to fold.
- Step 9: Gather the four corners and center tightly. Wrap the mattress around the playard frame with the padded side facing inward. Secure the mattress straps.
- Step 10: Place the folded playard into the carry bag.
Bassinet Assembly
To Assemble Bassinet:
- The playard must be fully assembled and locked before installing the bassinet feature. Remove the mattress from the playard to use inside the bassinet.
- Step 11: Connect the opposing Mattress Support Tubes attached to the bottom of the bassinet. Ensure they are connected.
- Step 12: Position the bassinet over the playard and secure by pushing down firmly on each plastic support clip until snapped into place.
- Step 13: Place the mattress into the bassinet with the padded side facing upward. Fasten the tabs underneath the mattress to secure it.
To Remove Bassinet: Remove mattress, disconnect support tubes, unsnap clips, and lift the bassinet.
Changing Table Assembly
To Assemble Changing Table:
- The playard must be fully assembled and locked before installing the changing table feature.
- Step 14: Connect the two (2) Long Curved Bars together. Insert these into the changing table fabric and slide them around inside the sleeve. Connect the two (2) Short Bars to each end of the Long Curved Bar, ensuring the knobs face down and in the same direction.
- Step 15: Insert the connector knob prongs into the holes on the playard corners. Turn the knobs counter-clockwise to lock. Flip the changing table onto the playard and snap the two (2) flap buttons down. Check that the changing table is correctly and securely installed before each use.
- Securing the Changing Table: When the changing table is flipped up, secure it to the playard frame using the provided velcro straps. Locate straps on the table underside and playard side rails, then fasten them.
- Changing Table Restraint System: Place child on the table, ensuring hands and arms are clear of the restraint. Bring the restraint around the child's waist and clip the buckle ends together. Tighten the strap snugly but do not overtighten. To remove, unsnap the buckle. Never use the changing table if it is damaged or broken.
Parent Organizer Assembly
Parent Organizer Assembly:
- Step 21: Position each hook so the hooked end faces the rear of the organizer. Press the hook firmly into the slot until it snaps into place. Connect the organizer/diaper stacker to the playard by sliding the two connecting clips over an open portion of the top rail. Note: Can only be installed on open sides where clips attach easily without interfering with other features.
Mobile Assembly
Mobile Assembly:
- A crib mobile is for visual stimulation, not grasping. Remove when baby begins to push up on hands and knees. If designed for wall/ceiling mounting, install out of reach. Always attach fasteners tightly. Do not add extra strings. Do not attach mobile with child in playard or bassinet.
- Steps 22-26: These steps detail connecting the various mobile arms (lower arm, upper curved arm, tri-shaped arm), attaching the wind-up mechanism, connecting toys by threading strings into slots, and finally attaching the mobile arm to the playard frame.
Music Center
Music Center Assembly & Operation:
- Step 27: The music center attaches to the playard's long rail.
- Step 28: Requires 4 AA batteries. Unscrew the battery door, install batteries as shown, and re-secure the door.
- Music Operation:
- Press the MUSIC button to play music and change songs.
- Press the NATURE button to play nature sounds and change sounds.
- Press the SLEEP button to play sleep music and change songs.
- Two buttons control the unit's volume.
- Press the VIBRATION button to activate vibration speeds.
- Press the NIGHT LIGHT button to turn on the night light.
Maintenance and Cleaning
- Use only household mild soap and warm water.
- DO NOT USE BLEACH.
- DO NOT MACHINE WASH.
Warranty Information
Do not return the product to the store. Please contact Baby Trend for replacement parts, service, and repair.
The Baby Trend® warranty covers workmanship defects within the first 180 days of purchase. Misuse, abuse, improper assembly, negligence, or alteration voids the warranty. Any property damage during installation is the end user's sole responsibility.
Contact Customer Service at 1 (800) 328-7363 (Monday-Friday, 8:00 am - 4:30 pm PST). Return Authorizations are required. Warranty valid only in North America.