FSP250-60RCB 250W 1U Redundant Power Supply Datasheet
Brand: FSP
Product Type: 250W 1U Redundant Switching Power Supply
Key Features
- Certified CB 62368-1 & CB 60950-1
- Meets 80 Plus Bronze standards
- Hot Swappable Modules
- Designed for operation up to 5,000 meters above sea level
- High Reliability
- Low Ripple & Noise
- Over Current Protection
- Over Temperature Protection
- Over Voltage Protection
Safety Standard Approvals
The product is certified by: CULUS LISTED, TÜVRheinland CERTIFIED, CE, FC.
Product Description
The FSP250-60RCB is a standard 1U Redundant switching power supply that provides a total power capacity of up to 250 Watts. It is ideally suited for industrial environments, including IPC controllers, workstations, communication systems, and other automation applications. This power supply complies with the latest safety and EMC standards, meeting various worldwide regulations.
General Specifications
Dimensions (L x W x H): 260 x 106 x 41.3 mm (10.24 x 4.17 x 1.62 inches)
Efficiency: 80 Plus Bronze
Hold-up Time: ≥ 16ms (at 115V/60Hz and 230V/50Hz)
Operating Altitude: 5,000 meters above sea level
Environmental Conditions:
- Working Temperature: 0°C to 50°C
- Storage Temperature: -20°C to +80°C
- Working Humidity: 85% RH non-condensing
- Storage Humidity: 95% RH non-condensing
MTBF (Mean Time Between Failures): 100,000 hours (continuous operation at 25°C, Max. output load)
Applications: Workstation, Storage System, IPC Controller
Input Specifications
Input Voltage: 90-264Vac
Input Frequency: 47-63Hz
Input Current: 115Vac @ 6A, 230Vac @ 3A
Output Rating
| Outputs | +3.3V | +5V | +12V1 | +12V2 | -12V | +5Vsb |
|---|---|---|---|---|---|---|
| Max. | 19.0A | 17.0A | 14.0A | 14.0A | 0.5A | 2.0A |
| Min. | 0.0A | 0.0A | 0.5A | 0.5A | 0.0A | 0.0A |
| Regulation | ±5% | ±5% | ±5% | ±5% | ±10% | ±5% |
| Ripple/Noise | 50 mV | 50 mV | 120 mV | 120 mV | 120 mV | 50 mV |
Note: The maximum total DC output power should not exceed 250W. The combined +3.3V and +5V total output shall not exceed 97W.
Mechanical Specifications
The FSP250-60RCB power supply is housed in a standard 1U rackmount chassis. The physical layout and dimensions are detailed in accompanying diagrams. The unit measures 260mm (length) x 106mm (width) x 41.3mm (height), which is equivalent to 10.24 x 4.17 x 1.62 inches. Various connectors are identified, including P1, P2, and ports labeled PA through PH. The exterior includes a specification label and a barcode label.
