FSP500-50WCB 500W 2U Power Supply Datasheet

Product Overview

The FSP500-50WCB is a standard 2U form factor switching power supply designed to deliver a total power capacity of up to 500 Watts. It is ideal for industrial environments, workstations, communication systems, and other automation applications. The product adheres to the latest safety and EMC standards, meeting various worldwide regulations.

Features

• Certified to CB 62368-1 & CB 60950-1
• Meets 80 Plus Bronze efficiency standards
• Designed for operation at altitudes up to 5,000 meters above sea level
• High Reliability
• Low Ripple & Noise
• Over Current Protection
• Over Voltage Protection

Safety Standard Approvals

The power supply has received approvals from various safety organizations, including:

• TÜV Rheinland Certified (Bauart geprüft, Sicherheit, Regelmäßige Produktions-überwachung)
• CULUS Listed
• CE Marked
• FCC Compliant

General Specifications

Dimensions (L x W x H): 200 x 100 x 70 mm (7.88 x 3.94 x 2.76 inches)

Efficiency: 80 Plus Bronze

Hold-up Time (at 100% Loading): ≥ 10ms (115V/60Hz), ≥ 12ms (230V/50Hz)

Operating Altitude: 5,000 meters above sea level

Environment:

• Working Temperature: 0°C to 50°C
• Storage Temperature: -20°C to +80°C
• Working Humidity: 85% RH non-condensing
• Storage Humidity: 95% RH non-condensing

MTBF: 100,000 hours of continuous operation at 25°C, Max. output load

Applications: Workstation, Storage System, IPC Controller

Input Specifications

Input Voltage: 90-264Vac

Input Frequency: 47-63Hz

Input Current: 115Vac @ 6A, 230Vac @ 3A

Output Rating

The +3.3V and +5V total output shall not exceed 90W.

* -5V is optional.

Mechanical Specifications

Unit: mm [inch]

Dimensions: The power supply has a 2U form factor with overall dimensions of 200 mm (7.88 inches) in length, 100 mm (3.94 inches) in width, and 70 mm (2.76 inches) in height.

Connector Layout: The unit features a connector panel with multiple connectors labeled P1, P2, P3, PA, PB, PC, PD, PE, and PF, arranged in a specific configuration for system integration.

Air Flow: An indicator shows the direction of airflow, typically from the front to the rear of the unit.

Labeling: Areas are designated for a "SPEC LABEL" and a "Bar Code".