FSP500-60MRB(S) 500W Mini-Redundant Power Supply
Technical Datasheet
Features
- Certified CB 62368-1 & CB 60950-1
- Meet 80 Plus Gold
- PMBus V1.2
- Design for 5,000 Meter above sea level
- High Reliability
- Low Ripple & Noise
- Over Current Protection
- Over Temperature Protection
- Over Voltage Protection
Safety Standard Approval
Certifications include: CULUS LISTED I.T.E. POWER SUPPLY E190414, TÜVRheinland ZERTIFIZIERT, CE, FC, CCC.
Description
The FSP500-60MRB(S) is a unique Mini-redundant power supply. It offers the same form factor from 350W to 600W, with a total power capacity up to 500 Watts. Its hot-swap features make it perfectly fit in a standard 2U server chassis and suitable for industrial or home office environments. This power supply is an ideal choice for server, workstation, communication, or any other automation applications. The product complies with the latest safety and EMC standards, meeting various regulations worldwide.
General Specifications
Dimensions
L x W x H: 190 x 150 x 84 mm (7.49 x 5.91 x 3.3 inches)
Efficiency
80 Plus Gold
Hold-up Time
115V / 60Hz: ≥ 16ms
230V / 50Hz: ≥ 16ms
Operating Altitude
5,000 meters above sea level
Environment
- Working temperature: 0°C to 50°C
- Storage temperature: -20°C to +80°C
- Working humidity: 90% RH non-condensing
- Storage humidity: 90% RH non-condensing
MTBF
100,000 hours of continuous operation at 25°C, Max. output load
Applications
Workstation, Storage System, IPC Controller
Input Specifications
- Input voltage: 90-264Vac
- Input frequency: 47-63Hz
- Input current: 115Vac @ 6A, 230Vac @ 3A
Output Rating
| Outputs | +3.3V | +5V | +12V | -12V | +5Vsb | -5V |
|---|---|---|---|---|---|---|
| Max. | 20.0A | 20.0A | 40.0A | 0.5A | 3.0A | 0.3A |
| Min. | 0.0A | 0.0A | 1.0A | 0.0A | 0.0A | 0.0A |
| Regulation | ±5% | ±5% | ±5% | ±10% | ±5% | ±5% |
| Ripple/Noise | 50 mV | 50 mV | 120 mV | 200 mV | 50 mV | 200 mV |
The +3.3V and +5V total output shall not exceed 130W (-5V Optional)
Mechanical Specifications
Unit: mm
Detailed dimensional drawings are provided, showing the unit's overall dimensions (Length 190mm, Width 150mm, Height 84mm) and mounting hole specifications. The drawings illustrate the layout of various connectors labeled P1, P2, P3, PA, PB, PC, PD, PE, PF, PG, PH, and indicate screw sizes for mounting, such as #6-32 UNC and M3 taps. The unit features a robust metal chassis with ventilation grilles. Internal components are arranged for efficient thermal management and redundancy. The front panel is not explicitly detailed in the provided OCR, but the image shows two large fans. The rear panel shows connector interfaces and ventilation.
