FSP500-50UDB 500W 1U Switching Power Supply
Technical Datasheet
Features
- Certified CB 62368-1 & CB 60950-1
- Meet 80 Plus Gold
- Design for 5,000 meters above sea level
- High Reliability
- Low Ripple & Noise
- Over Current Protection
- Over Voltage Protection
Safety Standard Approval: [TÜV Rheinland Certified] [CE FC]
Description
FSP500-50UDB is a standard 1U form factor switching power supply. The power supply offers a total power capacity up to 500 Watts, making it suitable for industrial environments, IPC controllers, workstations, communication, or other automation applications. The product complies with the latest safety and EMC standards to meet various worldwide regulations.
General Specifications
Dimension (L x W x H): 190 x 100 x 40.5 mm (7.49 x 3.94 x 1.6 inch)
Efficiency: 80 Plus Gold
Hold-up time: 115V/60Hz: ≥ 13ms, 230V/50Hz: ≥ 17ms
Operating altitude: 5,000 meters above sea level
Environment
Working temperature: 0°C to 50°C
Storage temperature: -20°C to +80°C
Working humidity: 85% RH non-condensing
Storage humidity: 95% RH non-condensing
MTBF: 100,000 hours of continuous operation at 25°C, Max. output load
Applications:
Workstation, Storage System, IPC Controller
Input Specifications
Input voltage: 90-264Vac
Input frequency: 47-63Hz
Input current: 115Vac @ 6A, 230Vac @ 3A
Output Rating
| Outputs | +3.3V | +5V | +12V | -12V | +5Vsb | -5V* |
|---|---|---|---|---|---|---|
| Max. | 14.0A | 16.0A | 41.0A | 0.3A | 3.0A | 0.1A |
| Min. | 0.0A | 0.0A | 0.05A | 0.0A | 0.0A | 0.0A |
| Regulation | ±5% | ±5% | ±5% | ±10% | ±5% | ±10% |
| Ripple/Noise | 50 mV | 50 mV | 120 mV | 120 mV | 50 mV | 100 mV |
The +3.3V and +5V total output shall not exceed 90W
* -5V is optional
Mechanical Specifications
UNIT: mm [inch]
The power supply unit is a 1U form factor with dimensions 190mm (7.49 inches) in length, 100mm (3.94 inches) in width, and 40.5mm (1.60 inches) in height. It features an AC input connector, a power switch, and cooling fans at both ends, indicated by '[Air Flow]' labels. Various DC output connectors are present, labeled P1 through P3 and PA through PG, including standard ATX connectors, SATA power connectors, and others.
P1 Connector: 20+4 pin ATX Main Power Connector.
P2 Connector: 4 pin ATX 12V Power Connector.
P3 Connector: Peripheral Power Connector (Molex type).
PA, PB, PC, PD, PF, PG Connectors: Multiple SATA power connectors and other peripheral power connectors.
