FSP400-50RDB 400W 1U Redundant Switching Power Supply
Technical Datasheet
Features
- Certified CB 62368-1 & CB 60950-1
- Meet 80 Plus Bronze
- Hot Swappable Modules
- Design for 5,000 Meter above sea level
- High Reliability
- Low Ripple & Noise
- Over Current Protection
- Over Temperature Protection
- Over Voltage Protection
Safety Standard Approval
Approvals include: CULUS Listed, TÜVRheinland Certified, CE, FC.
Description
The FSP400-50RDB is a standard 1U Redundant switching power supply offering a total power capacity of up to 400 Watts. It is suitable for industrial environments, IPC controllers, workstations, and communication or automation applications. The product complies with the latest safety and EMC standards, meeting various worldwide regulations.
General Specifications
| Specification | Details |
|---|---|
| Dimension (L x W x H) | 260 x 106 x 41.3 mm (10.24 x 4.17 x 1.62 inches) |
| Efficiency | 80 Plus Bronze |
| Hold-up time | ≥ 16ms (at 115V/60Hz), ≥ 16ms (at 230V/50Hz) |
| Operating altitude | 5,000 meters above sea level |
| Environment - Working temperature | 0°C to 50°C |
| Environment - Storage temperature | -20°C to +80°C |
| Environment - Working humidity | 85% RH non-condensing |
| Environment - Storage humidity | 95% RH non-condensing |
| MTBF | 100,000 hours of continuous operation at 25°C, Max. output load |
| Applications | Workstation, Storage System, IPC Controller |
Input Specifications
| Specification | Details |
|---|---|
| Input voltage | 90-264Vac |
| Input frequency | 47-63Hz |
| Input current | 115Vac @ 6A, 230Vac @ 3A |
Output Rating
| Outputs | +3.3V | +5V | +12V | -12V | +5Vsb |
|---|---|---|---|---|---|
| Max. | 20.0A | 20.0A | 33.34A | 0.5A | 2.0A |
| Min. | 0.0A | 0.0A | 0.1A | 0.0A | 0.0A |
| Regulation | ±5% | ±5% | ±5% | ±10% | ±5% |
| Ripple/Noise | 50 mV | 50 mV | 120 mV | 120 mV | 50 mV |
Note: The Max. total DC output power should not exceed 400W. The +3.3V and +5V total output shall not exceed 103W.
Mechanical Specifications
Dimensions are provided in millimeters [inches].
The power supply unit is a 1U rackmount form factor. The front panel features various connectors labeled P1, P2, P3, PA, PB, PC, PD, PE, PF. The main body dimensions are 260.00 mm [10.24 inches] in length, 106.00 mm [4.17 inches] in width, and 41.30 mm [1.626 inches] in height. A side view indicates a length of 120.40 mm [4.74 inches] for a specific section. There is a designated area for a 'SPEC LABEL' and a 'Bar Code'.
Front Panel Connectors:
- P1: Main AC input or power distribution.
- P2: Output connectors for system components.
- P3: Output connectors for system components.
- PA, PB, PC, PD, PE, PF: Various internal or external interface/power connectors.
Overall Dimensions:
- Length: 260.00 mm [10.24 inches]
- Width: 106.00 mm [4.17 inches]
- Height: 41.30 mm [1.626 inches]
Additional Views:
- A side view shows a dimension of 120.40 mm [4.74 inches].
- The unit includes a label area for specifications and a barcode.
