Jonathan Y JYL5604 Lamp Assembly and Safety Guide

Important Warnings

WARNING: Inspect the item carefully before attempting to install. If there is any damage or obvious defect, do not install. The item may not be returned once it has been installed.

Care and Maintenance

Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to the material. Avoid the use of chemicals and household cleaners as they may damage the finish.

Notice & Important Safety Instructions

• Please ensure you have all parts indicated before beginning assembly.
• Assemble this item on a soft surface to prevent scratching the finish during assembly.
• To reduce the risk of fire, electrical shock, or injury to persons or property, please follow the guidelines below for safe use and installation.
• The external flexible cable or cord of this luminaire cannot be replaced. If the cord is damaged, the luminaire shall be destroyed.
• This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an extension cord unless the plug can be fully inserted. Do not attempt to defeat this safety feature.

Product Information

Brand: JY JONATHAN Y

Model#: JYL5604

Product Dimensions: 15.5"L x 15.5"W x 20.5"H

Part List and Hardware List

Preparation and Assembly

Before beginning assembly, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.

Estimated Assembly Time: 6 minutes.

For questions relating to defects, missing parts, assembly issues, replacements, or device connectivity issues, please send a detailed email to cs@jonathany.com.

Bulb Recommendation: Please use ON/OFF TYPE "A" BULB MAX 100-WATT OR LED BULB MAX 12-WATT. A LED 9-WATT BULB IS INCLUDED IN THE BOX.

Assembly Steps

1. Step 1

   Place shade (C) onto the Socket (B).

2. Step 2

   Insert the bulb (D) into the socket (B).

3. Step 3

   Put the lamp on a level surface to check if everything is stable.

Enjoy your lamp.