WARNING
INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE & IMPORTANT SAFETY INSTRUCTIONS
- Please make sure that you have all parts indicated before you begin assembly of this item.
- This item should be assembled on a soft surface to prevent scratching the finish during assembly.
- To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for safe use and installation.
- The external flexible cable or cord of this lamp cannot be replaced; If the cord is damaged, the lamp shall be destroyed.
- This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an extension cord unless the plug can be fully inserted. Do not attempt to disregard this safety feature.
Part List and Hardware List
| PIECE | DESCRIPTION | PICTURE | QUANTITY | PIECE | DESCRIPTION | PICTURE | QUANTITY |
|---|---|---|---|---|---|---|---|
| A | Lamp base | [Decorative base] | 1X | E | Harp | [Curved metal support] | 1X |
| B | Neck | [Cylindrical connecting piece] | 1X | F | Shade | [Lampshade] | 1X |
| C | Saddle | [U-shaped piece] | 1X | G | Finial | [Decorative knob] | 1X |
| D | Socket | [Bulb holder with cord] | 1X | H | Bulb | [Light bulb] | 1X |
Assembly Instructions
Estimated Assembly Time: 6 minutes.
Before beginning assembly, ensure all parts are present. Compare parts with the package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
For questions regarding defects, missing parts, assembly issues, or replacements, please email cs@jonathany.com.
Bulb Information: Please use an ON/OFF TYPE "A" BULB MAX 100-WATT OR LED BULB MAX 12-WATT. An LED 9-WATT BULB is included in the box.
-
Step 1
Pull the power cord to connect the Neck (B) to the Base (A). Screw the Neck (B) onto the Lamp base (A). Be careful not to twist the power cord and tighten securely.
[Diagram 1: Shows the Lamp base (A) with the Neck (B) being attached. Labels C, D, B are near the top of the base/neck assembly. The power cord is visible.]
-
Step 2
Insert the Harp (E) into the Saddle (C). Place the Shade (F) onto the Harp (E), then tighten the Finial (G) onto the Harp (E). Insert the bulb (H) into the socket (D).
[Diagram 2: Shows the assembled base and neck. The Harp (E) is inserted into the Saddle (C). The Shade (F) is placed on the Harp (E). The Finial (G) is shown being tightened onto the Harp (E). The Bulb (H) is shown being inserted into the socket (D).]
-
Step 3
Place the assembled lamp on a level surface to check if everything is stable.
[Diagram 3: Shows the fully assembled lamp standing upright on a level surface, indicating stability.]
ENJOY YOUR LAMP
