Important Warnings
WARNING: We recommend installation of this lighting fixture be done by a licensed electrician.
WARNING: Switch off the main electrical supply from the main fuse box/circuit breaker before installation.
Inspect item carefully before attempting to install. If there is any damage or obvious defect, do not install. Item may not be returned once it has been installed.
Care and Maintenance
- To clean the outside of the fixture, use a dry or slightly dampened clean cloth (use clean water, never a solvent) to wipe the surface of the fixture.
- To clean the inside of the fixture, first disconnect power to the fixture by turning off the circuit breaker or by removing the fuse at the fuse box. Next, use a dry or slightly dampened clean cloth (use clean water, never a solvent) to wipe the interior surface of the fixture.
- Do not use any cleaners with chemical, solvents, or harsh abrasives. Use only a dry soft cloth to dust or wipe carefully.
Notice & Important Safety Instructions
- Please make sure that you have all parts indicated before you begin assembly of this item.
- This item should be assembled on a soft surface to prevent scratching the finish during assembly.
- To reduce the risk of fire, electrical shock, or injury to persons or property, please follow the guidelines below for safe use and installation.
- The external flexible cable or cord of this luminaire cannot be replaced.
- If the cord is damaged, the luminaire shall be destroyed.
Part List and Hardware List
| Piece | Description | Quantity | Piece | Description | Quantity |
|---|---|---|---|---|---|
| A | Wire Nut | 3X | D | Canopy Screw | 2X |
| B | Mounting Plate | 1X | E | Lamp Body | 1X |
| C | Mounting Screw | 2X | F | Bulb | 1X |
