User Manual
Scan the QR code to access the latest user manual or download it from the official website:
Download the App
Scan the QR code to download the app, or search for "Feiyu SCORP" in the App Store or Google Play.
Requires iOS 9.0 or above, Android 6.0 or above.
1. Overview
Note: Camera not included.
The FeiyuTech SCORP-PRO gimbal features a comprehensive set of controls and axes for professional camera stabilization. Key components include:
- Touch Screen: For accessing settings and controls.
- Shutter Button: To trigger camera shutter.
- Joystick: For manual control of gimbal movement.
- Handle Mode Button: To switch between different gimbal modes.
- Customizable Button: For user-defined functions.
- Handle Power Button: To power the handle on/off.
- Handle Lock: Secures the handle in place.
- Gimbal Mode Button: Selects gimbal operation modes.
- Gimbal Power Button: Powers the gimbal on/off.
- Type-C Charging Port: For charging the gimbal.
- Tripod: Provides a stable base for the gimbal.
- Pan Lock: Locks the pan axis.
- Pan Axis: Allows rotation around the vertical axis.
- Vertical Arm: Supports the camera mounting plate.
- Roll Lock: Locks the roll axis.
- Slide Arm: Allows for fore-aft camera adjustment.
- Tilt Axis: Allows tilting movement of the camera.
- Vertical Quick Release Plate Safety Lock: Secures the camera plate.
- Tilt Lock: Locks the tilt axis.
- Cross Arm Extending Position Knob: Adjusts the position of the cross arm.
- Cross Arm: The main arm supporting the camera.
- Roll Axis: Allows rotation around the roll axis.
- Slide Arm Lock Knob: Locks the slide arm.
- Camera Backing Base (Optional): Provides additional support for cameras.
- Quick Release Plate: For fast camera mounting and removal.
- Lens Holder (Optional): Supports longer or heavier lenses.
- Lens Holder Screw: Secures the lens holder.
- Vertical Arm Lock Knob: Locks the vertical arm.
- Knob Function Switching Button: Changes the function of the multifunction knobs.
- Trigger Button: Often used for focusing or starting/stopping recording.
- Multifunction Knob (Main Knob): Controls various parameters.
- A/B/C Button (Record Mark Points): For marking points in recordings.
- Remote Control Handle: An optional handle for remote operation.
- Multifunction Knob (Handle Knob): Controls parameters from the remote handle.
- Focusing Wheel: For manual focus control.
- Cross Arm Lock Knob: Locks the cross arm.
- Vertical Mounting Plate: Mounts the camera to the gimbal.
- Quick Release Plate Safety Lock: Secondary lock for the camera plate.
- Anti-drop Column: Prevents the camera from accidentally sliding off.
- Slider Lock: Secures the camera's position on the plate.
- Fixed Plate Slider: The plate that slides for camera balancing.
- P1 Camera Control Port: Connects to camera for control.
- P2 Image Transmission Port: For video signal transmission.
- P3 Extension Port 1: For accessories.
- P4 Extension Port 2: For accessories.
2. Getting Started
2.1 Charging
Fully charge the gimbal battery before first use. The gimbal supports quick charging via a USB 2.0 to Type-C cable.
The gimbal has a primary charging port for both gimbal and handle. There is also a separate handle charging port for handle-only charging.
2.2 Install the Tripod
Attach the 3/8-inch to 1/4-inch thread insert (factory mounted) to the 1/4-inch screw on the top of the tripod. Mount the tripod to the bottom of the gimbal. Unfold the tripod and place the gimbal on a flat surface.
2.3 Install the Remote Control Handle
To install the handle: wedge the buckle, push the handle down until the handle lock engages, then toggle the handle lock lever to the locked position. To detach: toggle the handle lock lever to the unlocked position and pull the handle up.
2.4 Adjust Gimbal to Balancing Position
The gimbal is folded by default. Toggle the tilt, roll, and pan lock levers to the unlocked position. Adjust the gimbal's arms to achieve a balanced state, then re-lock the three axes.
3. Mounting the Camera
Ensure your camera is ready for shooting (lens attached, lens cover removed, memory card and battery inserted, battery charged). Complete all steps in Chapter 2, and ensure the gimbal is in a balanced state. Power off or put the gimbal in sleep mode before mounting the camera.
3.1 Attach Quick Release Plate and Camera Backing Base (Optional)
Secure the quick release plate to the camera using the provided screw. For heavier setups, attach the camera backing base to the camera first, then to the quick release plate using two screws.
3.2 Install Lens Holder (Optional)
If using a long or heavy lens, install the lens holder onto the quick release plate. Ensure the rubber part of the holder is positioned directly under the lens for support.
3.3 Mount Camera on Gimbal (Horizontal Mounting)
Unlock the quick release plate safety lock. Slide the camera (mounted on the plate) into the gimbal's slot. Lock the safety lock once the camera is roughly balanced. Adjust the camera's left-right position using the slider lock to fine-tune balance, then re-lock the slider.
To Remove: Unlock the quick release plate safety lock and press the anti-drop column while removing the plate.
Feiyu SCORP Pro - FeiyuTech
