Feiyu SCORP Mini 3 Smartphone Version Instructions

1. Overview

This section provides an overview of the Feiyu SCORP Mini 3 gimbal, identifying its various components.

Key Components:

• [1] Power button
• [2] Trigger button
• [3] FPV button
• [4] Shutter button
• [5] Mode button
• [6] Joystick
• [7] F1 button
• [8] Knob function switching button
• [9] Multifunction knob
• [10] Indicator
• [11] F2 button
• [12] Al tracking camera
• [13] Al tracking indicator
• [14] Extension port
• [15] Camera control port/USB-C power output port* (*Supports charging for shooting devices compatible with the USB power supply protocol.)

Download the App

Scan the QR code or search for "Feiyu ON" or "Feiyu SCORP" in the App Store or Google Play to download the app.

App Requirements:

• Feiyu ON: iOS ≥ V12.0, Android ≥ V8.0
• Feiyu SCORP: iOS ≥ V13.0, Android ≥ V10.0

Mounting smartphone on gimbal for shooting

Feiyu ON:

• iOS
• Android

Mount mirrorless camera, pocket camera or action camera on gimbal for shooting*

Feiyu SCORP:

• iOS
• Android

*Optional Feiyu Scorp Mini3 camera accessories

2. Getting started

2.1 Charging

Fully charge the gimbal battery before first use. The gimbal supports quick charge via USB-C cable.

2.2 Adjust the gimbal to gimbal balancing position

Instructions for adjusting the gimbal from a folded position to a balanced position are provided with numbered steps.

3. Mounting the shooting equipment

Ensure the mounted equipment and accessories are within load requirements. Refer to the compatibility list at feiyu-tech.com for details.

Before mounting, ensure the camera is ready for shooting (lens installed, lens cover removed, memory card and battery inserted, battery fully charged). Complete "2. Getting started" steps and adjust the gimbal to the balancing position. Ensure the gimbal is powered off or in sleep mode before mounting.

3.1 Mounting a smartphone

3.1.1 Mounting smartphone holder

Steps for mounting the smartphone holder are illustrated.

3.1.2 Horizontal mounting for smartphone

Steps for horizontal mounting of a smartphone are illustrated.

3.1.3 Vertical mounting for smartphone

Steps for vertical mounting of a smartphone are illustrated.

3.2 Mounting a Camera (Optional camera accessories)

3.2.1 Attach the quick release plate

Attach the quick release plate to the camera by tightening the screw. If the camera lacks a 1/4-20 inch screw hole, use the provided mount adapter.

3.2.2 Horizontal mounting for camera

Steps for horizontal mounting of a camera are illustrated.

3.2.3 Vertical mounting for camera

Steps for vertical mounting of a camera are illustrated.

3.3 Mounting an action camera (Optional camera accessories)

3.3.1 Attach the quick release plate

Attach the quick release plate to the action camera.

3.3.2 Horizontal mounting for action camera

Steps for horizontal mounting of an action camera are illustrated.

3.3.3 Vertical mounting for action camera

Steps for vertical mounting of an action camera are illustrated.

4. Gimbal balancing

Please balance the gimbal before shooting. Tutorial videos are available.

When using optional accessories for mirrorless/compact/action cameras, ensure the camera and lens are ready and the gimbal is powered off or in sleep mode before balancing. It is recommended to hold the camera first, then adjust the slide arm, cross arm, and vertical arm.

4.1 Balancing the tilt axis

4.1.1 Balancing the vertical tilt

1. Unlock motor lock A and secure motor locks B and C.
2. Position the camera lens vertically upward.
3. Unlock, move ② in the opposite direction of the lens tilt until the lens remains vertically upward.
4. Lock, supporting the camera upward to ensure proper fixation.

4.1.2 Adjust depth for the tilt axis

1. Place the camera lens pointing horizontally forward.
2. Unlock, move ② in the opposite direction of the lens tilt until the lens remains horizontally forward.
3. Lock, supporting the camera to ensure proper fixation.

If the camera remains stationary at a tilt angle of about ±45°, the tilt axis is balanced.

4.2 Balancing the roll axis

1. Unlock motor lock B and secure motor locks A and C. Observe the camera's tilt direction.
2. Unlock, move ② in the opposite direction of the lens tilt until the cross arm remains level, indicating it is balanced.
3. Lock.

If the camera remains stationary at a horizontal angle, the roll axis is balanced.

4.3 Balancing the pan axis

1. Unlock motor lock C and secure motor locks A and B. Hold the handle and tilt the device to observe the camera's tilt direction.
2. Unlock and move ② in the opposite direction of the lens tilt until the vertical arm stays still, indicating it is properly balanced.
3. Lock.

If the camera remains stationary at a horizontal angle, the yaw axis is balanced.

5. Operation

5.1 Power ON/OFF

Ensure the gimbal is balanced and all three axes are unlocked before powering on. If not all axes are unlocked, the gimbal enters sleep mode. Single tap the power button to wake it up. Long press the power button until a beep sound is heard to power on/off.

5.2 Follow mode introduction

Follow Modes:

• PF (Pan follow): Only the pan axis follows the movement of the user's hand.
• PTF (Pan and tilt follow): Both pan and tilt axes follow the movement of the user's hand, but the roll axis does not.
• FPV: Pan, tilt, and roll axes follow the movement of the user's hand.
• Lock: All axes remain fixed, maintaining the camera's direction.
• FFW (Flash follow): All axes follow the movement of the user's hand at high speed.

5.3 Button operation

• Power button / M button: Long press for power on/off. Single tap to wake up (in sleep mode) or display battery level (when powered off). Double tap to enter sleep mode.
• M button: Single tap to cycle through PF, PTF, FPV modes. Tap five times for horizon calibration.
• Trigger button: Single tap for face tracking. Double tap to recenter (non-selfie mode) or selfie recenter (selfie mode). Triple tap to enter/exit selfie mode (Pan axis turns 180°). Press and hold for lock mode (release to exit). Functions can be customized via the App.
• Joystick: Push to control tilt and pan axes movement, or control the album.
• Shutter button:
  • Camera Connected: Press halfway for focus. Single tap (fully) to start/stop recording. Long press (fully) to take a photo.
  • Phone Connected: Press halfway for focus. Single tap (fully) for shutter. Long press (fully) to switch between video/photo mode.
• FPV button: Single tap to enter/exit FPV mode.
• F1 Button: Single tap to enter/exit album. Double tap to enter/exit portrait mode. Triple tap for Al power on/off. Long press to enter/exit Al tracking (with Al Power enabled).
• F2 Button: Single tap to lock/unlock screen (home page) or return to home page (other pages). Double tap to enter/exit FFW mode.
• Multifunction knob: Turn to control roll, tilt, and pan axes movement, electronic focus/zoom (requires Feiyu ON App), or focus motor. Adjust parameters on the touch screen. Long press the knob function switching button or swipe up on the home page to set the current control option (axes movement, electronic focus/zoom, or focus motor).
• Knob function switching button: Single tap to switch the control object (axes: Tilt/Pan/Roll, or electronic focus/zoom). Long press to switch control options for the multifunction knob.

Key Combinations:

• A: Joystick down + triple tap F2 button: Clears all Bluetooth pairing information for phone and remote. Re-pair after reboot.
• B: Joystick up + triple tap F2 button: Clears all Bluetooth pairing information for mirrorless camera. Re-pair after reboot.
• C: Knob function switching button + Power button: Press together for 1 second to force gimbal shutdown.

Note: Some features may require specific camera or smartphone support. Visit the official website for compatible device lists: feiyu-tech.com.

5.4 Touch screen operation

The touch screen provides access to various functions:

• Motor power: Use auto-tune or manually adjust motor power for each axis.
• Follow speed: Select different gimbal follow speed profiles or custom follow speed.
• Follow mode: Select gimbal follow mode (PF, PTF, FPV, Lock, FFW).
• Scenario: Scenario-based functional application.

Screen Navigation:

• Swipe from right to left: Joystick, gimbal, and more settings.
• Swipe from left to right: Shooting parameters settings.
• Swipe up: Multifunction knob settings.
• Return to previous menu: Swipe to right.

5.5 Al Tracking

Under Al Power-On State, the following controls are available:

Al Gesture Control

• OK gesture (Left or right hand): Start/Stop tracking. Green light indicates tracking; red light indicates standby. Separate gestures by 3 seconds.
• Thumbs opposite direction: Stop tracking and enter standby mode (red light).
• Spread palm (Left or right hand): Shutter. In photo/video mode, take photo or start recording after a 3-second countdown. Gesture again to stop recording.
• Double L-Shaped gestures: Custom framing. Green light blinks fast during framing; stays on when subject is positioned correctly and gesture is performed again.
• Two thumbs up gesture: Disable gesture control. Al tracking can still be controlled via buttons.

Button control

• Long press F1 button: Start tracking/Stop tracking.
• Triple tap F1 button: Al power on/off.
• Double tap Trigger button: Stop tracking.

5.6 Indicator

Follow status indicator:

• TILT = Tilt axis
• ROLL = Roll axis
• PAN = Pan axis

The indicator lights up when the corresponding axis follows the user's hand movement.

Camera/Bluetooth indicator

Battery indicator:

• Green light: Power on / Charging complete.
• Red light: Charging.
• Red light flashing rapidly: Low power, will auto power off.
• Light off: Power off.

6. Specifications

• Product Name: Feiyu SCORP Mini 3 Smartphone Version
• Product Model: FYSm3m
• Max. Tilt Range: +168° ~-145° (±3°)
• Max. Roll Range: +70° ~-245° (±3°)
• Max. Pan Range: 360°
• Weight (main body): About 940g (excluding tripod)
• Payload Capability: About 2000g (well-balanced)
• Battery life: ≤ 14 Hours (Motion State)
• Battery: 4500mAh
• Operating Voltage: 6.8V-8.4V
• Compatible: Smartphones (Width: 52mm~88mm, thickness: < 9.5mm); Optional camera accessories for cameras (Sony, Canon, Nikon, Panasonic, etc.) and action cameras (like GoPro). Refer to the official website for specific camera and lens compatibility.
• Bluetooth name: FY_SCORP_Mini3_XX

List of Included Items:

• [1] Main body x1
• [2] Smartphone holder (with fan) x1
• [3] Tripod x1
• [4] Manual x1
• [5] Type-C to Lightning Cable x1
• [6] Type-C Cable x1
• [7] Type-C to Type-C Cable x1

Notice

• Ensure motor spinning is not blocked by external force when the product is powered on.
• The product is not waterproof or splash-proof. Do not contact water or other liquids. Do not contact seawater or other corrosive liquids.
• Do not disassemble the product except for marked detachable parts. Contact FeiyuTech after-sales or an authorized service center for repairs. Users are responsible for any costs incurred due to accidental disassembly.
• Prolonged continuous operation may cause the product surface temperature to rise; operate carefully.
• Do not drop or strike the product. Contact Feiyu After-sales support for any abnormalities.

Storage and Maintenance

• Keep out of reach of children and pets.
• Do not place near heat sources like furnaces or heaters. Do not leave in a vehicle on hot days.
• Store in a dry environment.
• Do not overcharge or overuse the battery to prevent damage. If not in use for a long time, charge at least once a month.
• Do not use the product when the temperature is too high or too low.

IC warning

This device complies with Innovation, Science and Economic Development Canada's license-exempt RSS(s). Operation is subject to two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

IC Radiation Exposure Statement

This equipment complies with IC radiation exposure limits for an uncontrolled environment.

FCC regulatory conformance

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.

NOTE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE

The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment.

RF Exposure

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

Warning: Please read the user manual carefully before use. Improper use of this product may cause damage and pose a risk to your safety.

This document is subject to change without notice.

Feiyu Gimbal Privacy Policy

Guilin Feiyu Technology Incorporated Company (hereinafter referred to as "Feiyu", "we", or "us") understands the importance of your privacy and is committed to protecting it. This Privacy Policy (the "Policy") applies to the gimbals we provide.

If you are considered a minor or do not have full legal capacity in your jurisdiction, please read and understand this Policy with your legal guardian. You may use Feiyu products and services only after obtaining your guardian's consent.

Please read this Policy carefully to understand how your personal information is handled. Personal information will be processed in compliance with applicable laws and regulations, based on lawful and legitimate purposes, and in accordance with the principle of good faith. For questions about this Policy, contact Feiyu via the information provided on the website.

I. How we collect and use your personal information

Personal information is data recorded electronically or otherwise that relates to an identified or identifiable natural person, and does not include anonymized information. Definitions of "personal information" may vary by country or region; refer to local data protection laws for specifics.

Feiyu adheres to principles of lawfulness, fairness, and necessity when collecting and using personal information for the purposes described. Personal information is collected voluntarily or generated during product/service use. If personal information is needed for purposes not stated in this Policy, or for a different purpose than originally collected, users will be notified and consent obtained.

(A) Collection of Personal Information

When using Feiyu products/services, the following personal information may be collected:

1. Gesture Control service: When enabled, the gimbal captures images of your head and hands for real-time gesture recognition. This processing is one-time and necessary for the service. Images and data are not stored. The Al camera can be turned off in More Settings > Al Power.
2. Al Tracking service: When enabled, the gimbal captures images of your head and body for real-time tracking. This processing occurs during each recognition session and is necessary for the service. Head or body structure data is not stored or retained.
3. Customer support: Content submitted to the support team may be collected.
4. Policy updates: Policy content is updated periodically. Specific updates will be detailed in the manual on the official website at feiyu-tech.com.

Feiyu respects and prioritizes personal privacy. No video, audio content, or recordings generated during communications will be stored.