Manuals+

FeiyuTech SCORP Mini 3 Pro User Manual

Tutorial

Tutorial videos can be watched at the FeiyuTech official website or by scanning the QR code. Visit: https://www.feiyu-tech.com/play/

Download the App

Scan the QR code to download the app, or search for "Feiyu SCORP" or "Feiyu ON" in the App Store or Google Play.

Feiyu SCORP requires: iOS version 13.0 or later, Android version 10.0 or later.

Feiyu ON requires: iOS version 12.0 or later, Android version 8.0 or later.

Mount mirrorless camera, pocket camera, or action camera on gimbal for shooting:

Mounting smartphone on gimbal for shooting:

1. Overview

*Camera/Smartphone not included.

Gimbal Components:

*Supports charging for shooting devices compatible with the USB power supply protocol.

2. Getting Started

2.1 Charging

Please fully charge the battery before powering on the gimbal for the first time. Charging with a USB-C cable supports quick charge with a power output of up to 18W.

2.2 Adjust the gimbal to gimbal balancing position

The gimbal is folded by default. Please unlock all three axes and adjust the gimbal to the gimbal balancing position, then lock the three axes.

Gimbal folded position

Gimbal balancing position

3. Mounting the shooting equipment

Before mounting, ensure that the mounted shooting equipment and accessories are within the load requirements. For camera setup steps, please refer to the relevant compatibility list. Visit https://www.feiyu-tech.com/feiyu-scorp-mini-3-pro/down.html to check the latest relevant compatibility and controllable device list.

Before mounting the shooting equipment, ensure the camera is ready for shooting (install the camera lens, remove the lens cover, insert memory card and battery, and ensure the battery is fully charged). Complete all steps mentioned in chapter "2. Getting started" and ensure the gimbal is adjusted to the gimbal balancing position. Make sure the gimbal is powered off or in sleep mode before mounting the camera.

3.1 Mounting a Camera

3.1.1 Attach the quick release plate

Attach the quick release plate to the camera by tightening the screw. Install the lens holder on the quick release plate if needed; the rubber of the lens holder must be directly under the lens. It is recommended to use the lens holder when using a long or heavy lens.

If the camera does not have a 1/4-20 inch screw hole, place the camera on a mount adapter with a 1/4-20 inch screw hole, and then follow the steps above to mount it.

3.1.2 Horizontal mounting for camera

  1. Unlock the slide arm lock
  2. Slide the slide arm into the slot
  3. Lock the slide arm lock
  4. Unlock the slider lock
  5. Slide the slider into the slot
  6. Lock the slider lock
  7. Unlock the quick release plate lock
  8. Slide the camera (mounted on the quick release plate) into the slot
  9. Lock the quick release plate lock

3.1.3 Vertical mounting for camera

  1. Unlock the slide arm lock
  2. Slide the slider into the slot
  3. Lock the slide arm lock
  4. Unlock the quick release plate lock
  5. Slide the camera (mounted on the quick release plate) into the slot
  6. Lock the quick release plate lock

3.2 Mounting an action camera

3.2.1 Attach the quick release plate

Attach the quick release plate to the 1/4-inch screw hole on the bottom. Tighten the camera fixed screw.

3.2.2 Horizontal mounting for action camera

  1. Unlock the slide arm lock
  2. Slide the slide arm into the slot
  3. Lock the slide arm lock
  4. Unlock the slider lock
  5. Slide the slider into the slot
  6. Lock the slider lock
  7. Unlock the quick release plate lock
  8. Slide the action camera (mounted on the quick release plate) into the slot
  9. Lock the quick release plate lock

3.2.3 Vertical mounting for action camera

  1. Unlock the slide arm lock
  2. Slide the slider into the slot
  3. Lock the slide arm lock
  4. Unlock the quick release plate lock
  5. Slide the action camera (mounted on the quick release plate) into the slot
  6. Lock the quick release plate lock

3.3 Mounting a smartphone

  1. Unlock the slide arm lock
  2. Slide the smartphone holder into the slot
  3. Lock the slide arm lock

Before mounting your phone, it is recommended to remove the phone case. After attaching the smartphone holder, rotate it to the horizontal or vertical position, then open the holder and place your phone in the center.

Note: Before switching between horizontal or vertical mounting, the gimbal must be powered off or in sleep mode.

4. Gimbal balancing

Please balance the gimbal before shooting. Use the camera mounting as an example. Ensure the camera and lens are ready for shooting, and the gimbal is powered off or in sleep mode before balancing.

It is recommended to hold up the camera first, then move the slide arm, cross arm, and vertical arm.

4.1 Balancing the tilt axis

4.1.1 Balancing the vertical tilt

  1. Unlock motor lock A and secure motor locks B and C.
  2. Position the camera lens vertically upward.
  3. Unlock ①, move ② in the opposite direction of the lens tilt until the lens remains vertically upward.
  4. Lock ①, supporting the camera upward to ensure proper fixation.

4.1.2 Adjust depth for the tilt axis

  1. Place the camera lens pointing horizontally forward.
  2. Unlock ①, move ② in the opposite direction of the lens tilt until the lens remains horizontally forward.
  3. Lock ①, supporting the camera to ensure proper fixation.

If the camera remains stationary at a tilt angle of about ±45°, it indicates that the tilt axis has been balanced.

4.2 Balancing the roll axis

  1. Unlock motor lock B and secure motor locks A and C. Observe the camera's tilt direction.
  2. Unlock ①, move ② in the opposite direction of the lens tilt until the cross arm remains level, indicating it is balanced.
  3. Lock ①.

If the camera remains stationary at a horizontal angle, it indicates that the roll axis has been balanced.

4.3 Balancing the pan axis

  1. Unlock motor lock C and secure motor locks A and B. Hold the handle and tilt the device to observe the camera's tilt direction.
  2. Unlock ① and move ② in the opposite direction of the lens tilt until the vertical arm stays still, indicating it is properly balanced.
  3. Lock ①.

If the camera remains stationary at a horizontal angle, it indicates that the yaw axis has been balanced.

5. Power ON/ OFF & Wake Up

5.1 Power ON/OFF

Before powering on the gimbal, ensure that the gimbal is balanced and all three axes are unlocked. If not all axes are unlocked, the gimbal will enter sleep mode to protect itself. Tap the power button once to wake up the gimbal after unlocking all axes.

Important: Please set motor power first after powering on the gimbal for the first time or after changing a new camera/lens. (Please refer to chapter 8.3.1)

Long press the power button and release it when you hear the beep sound to power on/off.

When assembled, the device can be powered on using either A or B. In separate mode, A and B must be powered on individually.

5.2 Lock/Unlock screen

Lock screen: Single tap the handle power button to lock the screen.

Unlock screen: Single tap the handle power button again to unlock the screen.

Lock screen example:

Unlock screen example:

5.3 Sleep/Wake up

Sleep: Double tap the power button to enter sleep mode.

Wake up: Single tap the power button or tap the ? icon on the screen in sleep mode to wake up the gimbal.

6. Function/Modes Introduction

6.1 Follow modes introduction

  1. PF (Default mode): Pan follow, only the pan axis follows the movement of the user's hand.
  2. PTF: Pan and tilt follow, where both the pan and tilt axes follow the movement of the user's hand, but the roll axis does not.
  3. FPV: Pan, tilt, and roll follow, where all 3 axes follow the movement of the user's hand.
  4. Lock: All 3 axes do not follow the movement of the user's hand; the gimbal keeps the direction of the camera fixed.
  5. FFW: Flash follow, where all 3 axes follow the movement of the user's hand at high follow speed.

6.2 Other function introduction

7. App Connecting

Download the App

Scan the QR code to download the app, or search for "Feiyu SCORP", "Feiyu ON" in the App Store or Google Play.

Feiyu SCORP: OS ≥ V13.0, Android ≥ V10.0

Feiyu ON: iOS ≥ V12.0, Android ≥ V8.0

Mount mirrorless camera, pocket camera or action camera on gimbal for shooting:

Mounting smartphone on gimbal for shooting:

7.1 Connect App

When mounting a mirrorless camera, pocket camera, or action camera on the gimbal for shooting, please use the "Feiyu SCORP" App. When mounting a smartphone on the gimbal for shooting, please use the "Feiyu ON" App.

Follow the prompts to register for the first time.

7.1.1 Connect with Feiyu SCORP App

  1. Turn on the gimbal.
  2. Turn on your smartphone's Bluetooth, run the Feiyu SCORP App, and tap the top of the home page to connect the gimbal.

After a successful connection, you can easily control the gimbal via the App, including controlling the pan and tilt axis angle with the virtual joystick, switching modes, setting motor power/camera parameters/follow speed, and updating firmware.

7.1.2 Connect with Feiyu ON App

  1. Turn on your smartphone's Bluetooth, run the Feiyu ON App, and the App will search for the gimbal automatically. Follow the prompts to connect the gimbal.

After a successful connection, you can easily control the gimbal via the App, including controlling the pan and tilt axis angle with the virtual joystick, switching modes, setting motor power/camera parameters/follow speed, and updating firmware.

7.2 Function introduction of Feiyu SCORP App

7.3 Function introduction of Feiyu ON App

Shooting Interface

Control Interface

8. Operation

8.1 Button operation

Key Combinations:

Note:

8.2 Touch screen operation

Home page:

Navigation:

Swipe from right to left

Swipe from left to right

Swipe up

8.3 Function operation

8.3.1 Motor power settings

Important: Please set motor power first after powering on the gimbal for the first time or after changing a new camera/lens.

Auto tune: Gimbal auto-tunes the motor power according to the load.

Adjust motor power manually: Adjust the motor power for each axis manually according to the load.

Tips: If the gimbal is vibrating at high frequency, the motor power is too strong. If the gimbal is shaking at low frequency and large amplitude, the motor power is too weak.

Auto tune the motor power (Recommended)

Adjust motor power for each axis manually

8.3.2 Follow speed settings

Tap "Follow speed" on the home page and select different preset gimbal follow speed profiles: Slow/Med/Fast, or custom follow speed and dead zone.

8.3.3 Follow mode settings

Tap the lower-left icon on the home page to select follow modes.

Follow mode:

8.3.4 Timelapse

Select "Scenario" on the home page, then select "Timelapse". Select motionlapse/static timelapse/hyperlapse according to your needs and follow the tips to set the parameters to start shooting.

Motionlapse: Shoot timelapse photography according to the waypoints that have been set.

Static timelapse: Shoot timelapse photography with a fixed shooting angle.

Hyperlapse: Shoot timelapse photography while moving.

8.3.5 Auto rotation

Can be used to achieve the image rotating scene frequently used in the movie "Inception". Select "Scenario" on the home page, then select "Auto rotation". The tilt axis will rotate 90° counterclockwise to make the camera point upward. The gimbal starts to rotate after setting the rotation speed, direction, and rotational number.

Exit: Swipe from left to right to return to the previous menu to exit auto rotation mode.

8.3.6 Panorama

Select "Scenario" on the home page, then select "Panorama". Choose a panorama mode to start shooting a series of interconnecting still images. Users can then generate a panorama using image processing software.

8.3.7 Portrait mode

Select "Scenario" on the home page, then select "Portrait mode". The tilt and pan axis will rotate 90° counterclockwise to make the camera point upward. Hold the handle to make the lens horizontal to the ground to shoot in portrait mode.

Exit: Tap the icon at the bottom of the screen to exit.

8.3.8 Selfie mode

Select "Scenario" on the home page, then select "Selfie mode". The gimbal turns 180° horizontally so that the camera faces you.

Exit: Tap the icon at the bottom of the screen to exit.

Disable selfie: Swipe from left to right on the home page, then select "Gimbal settings" to enable the disable selfie switch. The selfie mode will not be entered if the trigger button is tapped three times.

8.3.9 Track video

Select "Scenario" on the home page, then select "Track video" to capture video with up to 10 waypoints.

Use the joystick or manually move the camera to the desired position, tap the "+" icon to confirm the waypoint, and repeat to add another waypoint. Track video is designed to capture video with up to 10 waypoints.

Select a waypoint number to quickly check the position for that waypoint, and tap the ?️ icon to delete it.

After setting up the smoothness, tap "Start shooting" to begin shooting.

The shooting progress will show on the screen. If you need to stop it midway, tap "Stop shooting" to stop it.

After shooting is complete, tap "Confirm and return" to exit.

8.3.10 Joystick settings

Swipe from right to left on the home page and select 'Joystick Settings'.

8.3.11 Gimbal settings

Swipe from right to left on the home page and select 'Gimbal settings'.

8.3.12 Bluetooth settings

Connect the camera/GoPro Camera: Swipe from right to left on the home page and select "Bluetooth Settings." Enable "Camera Control." Turn on your camera's Bluetooth. On the gimbal screen, choose the corresponding camera Bluetooth name for connecting. Once the connection is successful, a ? icon will appear at the top of the main page.

Connect the smartphone: Swipe from right to left on the home page and select "Bluetooth Settings" to view the gimbal's Bluetooth name. Turn on your phone's Bluetooth, locate the gimbal's Bluetooth name for connecting. Once the connection is successful, a ? icon will appear at the top of the main page.

8.3.13 Backlight settings

Swipe from right to left on the home page, and select "Backlight Settings" to adjust the screen's backlight brightness.

8.3.14 AI Tracking

Triple tap the F1 button to turn AI power on or off. Alternatively, swipe from right to left on the home page of the screen, select "More Settings" to toggle the "AI Power" switch on or off.

After turning on the AI power, the tracking module indicator light will remain solid red.

AI Gesture Control:

Button control:

8.4 Control ports

There is a camera control port and an extension port on the fixed plate to control the camera and other extension devices, such as a focus motor, etc.

① Camera control port

② Extension port (connect focus motor and etc.)

Connect camera with shutter cable

9. Specifications

List

Notice

  1. Make sure motor spinning is not blocked by external force when the product is powered on.
  2. The product should not contact water or other liquids unless it is marked waterproof or splash-proof. Waterproof and splash-proof products should not contact seawater or other corrosive liquids.
  3. Do not disassemble the product except for marked detachable parts. If accidental disassembly causes abnormal operation, send it to FeiyuTech after-sales service or an authorized service center for repair. Relevant costs are borne by the user.
  4. Prolonged continuous operation may cause the product surface temperature to rise; please operate carefully.
  5. Do not drop or strike the product. If the product is abnormal, contact Feiyu After-sales support.

Storage and Maintenance

  1. Keep the product out of the reach of children and pets.
  2. Do not leave the product near heat sources such as a furnace or heater. Do not leave the product inside a vehicle on hot days.
  3. Please store the product in a dry environment.
  4. Do not overcharge or overuse the battery, otherwise it will cause damage to the battery core. If the product is not used for a long time, please charge it at least once within one month.
  5. Never use the product when the temperature is too high or too low.

IC warning

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's license-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

IC Radiation Exposure Statement

This equipment complies with IC radiation exposure limits defined for an uncontrolled environment.

FCC regulatory conformance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.

NOTE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

NOTE

The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment.

RF Exposure

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

Warning: Please read the user manual carefully before use. Improper use of this product may cause damage and pose a risk to your safety.

This document is subject to change without notice.

Tutorial Videos

Feiyu Gimbal Privacy Policy

Guilin Feiyu Technology Incorporated Company (hereinafter referred to as "Feiyu", "we", or "us") understands the importance of your privacy and is committed to protecting it. This Privacy Policy (the "Policy") applies to the gimbals we provide.

If, under the laws of your jurisdiction, you are considered a minor or do not have full legal capacity (hereinafter "Minor"), please carefully read and fully understand this Policy together with your legal guardian. You may use Feiyu products and services only after obtaining your guardian's consent.

Please read this Policy carefully to ensure you understand how we handle your personal information. We will process your personal information in compliance with applicable laws and regulations, based on lawful and legitimate purposes and in accordance with the principle of good faith. If you have any questions about this Policy, you can contact us using the information provided on our website.

I. How we collect and use your personal information

Personal information is information recorded electronically or otherwise that relates to an identified or identifiable natural person, and does not include information that has been fully anonymized. Please note that definitions of "personal information" (also referred to as "personal data") may vary in different countries or regions; for specifics, please refer to the personal information protection laws and regulations applicable in your location.

We adhere to the principles of lawfulness, fairness, and necessity when collecting and using your personal information for the purposes described below. We collect the personal information you voluntarily provide during your use of our products and services, or that is generated as a result of such use. If we need to use your personal information for any purposes not stated in this Policy, or to use information collected for one purpose for another purpose, we will notify you in a reasonable manner and obtain your consent again before such use.

(A) Collection of Personal Information

When you use our products/services, we will collect and use the following personal information:

  1. To provide you with the "Gesture Control" service, when you enable the "Gesture Control" feature and make a gesture, the gimbal captures images of your head and hands. On-device AI analyzes your hand structure in real time to recognize the gesture command and activate the specified function. This processing is one-time only and is necessary to provide the service. Rest assured, we do not store any images of your head or data about your hand structure. You can turn off the AI camera at any time under More Settings > AI Power.
  2. To provide you with the "AI Tracking" service, when you enable the "AI Tracking" feature during use, the gimbal captures images of your head and body. On-device AI analyzes your head and body structure in real time to track movement. This processing occurs only during each recognition session and is necessary to provide the service. We do not store or retain any of your head or body structure data.
  3. In addition to the information described above, in order to provide you with customer support services, we may collect the content you submit to our support team.
  4. The content of this Policy will be updated periodically. Specific updates will be detailed in the manual on our official website at https://www.feiyu-tech.com.

Please be informed and rest assured that we deeply respect and prioritize the protection of your personal privacy. We will not store any video or audio content or recordings generated during your communications using our device.

Models: SCORP Mini 3 Pro All in One Tracking Gimbal, SCORP Mini 3 Pro, All in One Tracking Gimbal, One Tracking Gimbal, Tracking Gimbal, Gimbal

File Info : application/pdf, 39 Pages, 13.17MB

PDF preview unavailable. Download the PDF instead.

SCORP Mini 3 Pro Manual v2.0 ?v=1750328435

References

Adobe PDF Library 10.0.1 Adobe InDesign CS6 (Windows)

Related Documents

Preview Feiyu SCORP Mini 3 Pro Gimbal Instructions
Comprehensive instructions for the Feiyu SCORP Mini 3 Pro handheld gimbal, covering setup, mounting, balancing, operation, and specifications for camera and smartphone use.
Preview Feiyu SCORP Mini 3 Smartphone Version Instructions
This document provides instructions for the Feiyu SCORP Mini 3 Smartphone Version gimbal, covering setup, operation, and specifications.
Preview Feiyu SCORP Mini 3 Smartphone Version Instructions
This document provides instructions for the Feiyu SCORP Mini 3 Smartphone Version gimbal, covering setup, operation, and specifications.
Preview FeiyuTech SCORP-C Gimbal Stabilizer User Manual
Comprehensive user manual for the FeiyuTech SCORP-C 3-axis handheld gimbal stabilizer, covering setup, balancing, operation, app connectivity, and specifications for DSLR and mirrorless cameras.
Preview FeiyuTech SCORP Mini 3 Pro User Manual
User manual for the FeiyuTech SCORP Mini 3 Pro handheld gimbal, covering setup, operation, features, and specifications.
Preview FeiyuTech SCORP Mini P Quick Start Guide
A quick start guide for the FeiyuTech SCORP Mini P, a 3-axis handheld gimbal for smartphones. This guide covers overview, getting started, mounting the smartphone, gimbal balancing, operation, button functions, indicators, specifications, and FCC regulatory conformance.
Preview FeiyuTech VB4 3-Axis Handheld Gimbal for Smartphone: User Manual
Comprehensive user manual for the FeiyuTech VB4 3-Axis Handheld Gimbal for Smartphones. Covers setup, operation, modes, connection, indicators, specifications, and maintenance for this compact smartphone stabilizer.
Preview FeiyuTech a2000 3-Axis Gimbal User Manual
Comprehensive user manual for the FeiyuTech a2000 3-Axis Gimbal, covering product overview, installation, operation, balance adjustment, and firmware upgrades. Learn how to set up and use your gimbal for professional camera stabilization.