FeiyuTech SCORP 2 Quick Start Guide

1. Overview

Note: Camera not included.

The Feiyu SCORP 2 is a 3-axis handheld gimbal for cameras. This section provides an overview of its components.

Key Components:

• [1] Power button
• [2] Touch screen
• [3] Shutter button
• [4] Mode button
• [5] Joystick
• [6] F1 button
• [7] Kickstand
• [8] Handle
• [9] FPV button
• [10] Knob function switching button
• [11] Multifunction knob
• [12] Anti-drop lock for slider
• [13] Slider
• [14] Quick release plate lock
• [15] Slider lock
• [16] Vertical arm
• [17] Anti-drop lock
• [18] Quick release plate
• [19] Camera backing base
• [20] Slider
• [21] Slider lock
• [22] Image transmission port
• [23] Extension port 1
• [24] Cross arm lock knob
• [25] Cross arm
• [26] Trigger button
• [27] Roll lock
• [28] Versatile arm
• [29] F2 button
• [30] Tilt lock
• [31] Tilt axis
• [32] Camera for tracking module
• [33] Indicator light for tracking module
• [34] Lens holder
• [35] Lens holder screw
• [36] Extension port 2
• [37] Camera control port
• [38] Vertical arm lock knob
• [39] Pan axis
• [40] Pan axis
• [41] A/B button
• [42] Trigger button
• [43] 1/4 inch thread hole

User Manual & App Download

Scan the QR code to get the latest user manual or download it from the official website: https://www.feiyu-tech.cn/feiyu-scorp-2/

Download the App:

Scan the QR code to download the app, or search for "Feiyu SCORP" in the App Store or Google Play.

Requires iOS 11.0 or above, Android 6.0 or above.

2. Getting started

2.1 Charging

Please fully charge the battery before powering on the gimbal for the first time. Charging with a USB 2.0 to Type-C cable supports quick charge.

2.2 Adjust the gimbal position to gimbal balancing position

The gimbal is folded by default. Please unlock all three axes and adjust the gimbal position to the balancing position, then lock the three axes.

Diagram showing gimbal folded position and gimbal balancing position.

3. Mounting the Camera

Before mounting the camera, ensure the camera is ready for shooting (camera lens installed, lens cover removed, memory card and battery inserted, and battery fully charged). Complete all steps in Chapter 2, "Getting started," and adjust the gimbal to the balancing position. Ensure the gimbal is powered off or in sleep mode before mounting the camera.

3.1 Attach the quick release plate and camera backing base (Optional)

Attach the quick release plate to the camera by tightening the screw. The camera backing base can be attached to the camera if needed, especially for long or heavy lenses. Attach the camera backing base to the camera, then attach it to the quick release plate by tightening two screws.

Diagram showing attachment with quick release plate only, and attachment with camera backing base and quick release plate.

3.2 Install lens holder (Optional)

Install the lens holder on the quick release plate if needed. The rubber of the lens holder should be directly under the lens. It is recommended to use the lens holder for long or heavy lenses.

3.3 Mount camera on gimbal

Unlock, slide ② into the slot, lock, loosen, slide ④ into the slot as indicated. Adjust the camera forward and backward until roughly balanced, then tighten ③. It is recommended to push the camera against the tilt axis. Unlock to move the camera left or right according to the camera's width to adjust, then lock ①.

Diagram showing camera mounting steps.

4. Gimbal Balancing

Please balance the gimbal before shooting. Ensure the camera and lens are ready for shooting, and the gimbal is powered off or in sleep mode before balancing. It is recommended to hold the camera first, then move the slide arm, cross arm, and vertical arm.

4.1 Balancing the tilt axis

4.1.1 Balancing the vertical tilt

a. Unlock the tilt lock [30] and loosen the slide arm lock [2].

b. Rotate the tilt axis so the camera lens is pointing upward. Check the direction the lens tilts.

c. If the lens tilts to one side, the camera is heavy on that side. Move the slide arm [3] to the opposite direction until the camera is steady pointing upward.

d. Tighten the slide arm lock [2] while holding the camera.

4.1.2 Adjust depth for the tilt axis

a. Rotate the tilt axis so the camera lens is pointing forward. Check the direction the lens tilts.

b. If the lens tilts to one side, the camera is heavy on that side. Unlock the quick release plate lock [14] and then move the quick release plate [18] to the opposite direction until the camera is steady pointing forward.

c. Lock the quick release plate lock [14] while holding the camera.

The tilt axis is balanced when the camera is steady when tilted up or down by 45°.

4.2 Balancing the roll axis

a. Unlock the roll lock [27] and check the direction the camera tilts.

b. If the camera tilts to one side, it is heavy on that side. Loosen the cross arm lock knob [24] and move the cross arm [25] to the opposite direction until the camera stays still and horizontal to the ground.

c. Tighten the cross arm lock knob [2].

The roll axis is balanced when the camera can stay still and horizontal to the ground.

4.3 Balancing the pan axis

a. Unlock the pan lock [39]. Hold the tripod and tilt the gimbal forward until it is horizontal to the ground.

b. If the camera tilts to one side, it is heavy on that side. Loosen the vertical arm lock knob [38] and move the vertical arm [16] to the opposite direction until the camera stays still and horizontal to the ground.

c. Tighten the vertical arm lock knob [2].

The pan axis is balanced when the camera can stay still and horizontal to the ground.

5. Operation

5.1 Power ON/OFF

Before powering on the gimbal, ensure it is balanced and all three axes are unlocked. If any axes are locked, the gimbal will enter sleep mode. Single tap the power button to wake the gimbal from sleep mode after unlocking all axes.

Important: Please set motor power first after powering on the gimbal for the first time or after changing the camera/lens. Long press the power button and release it when you hear the beep sound to power on/off.

5.2 Follow mode introduction

PF (Pan Follow): Only the pan axis follows the movement of the user's hand.

PTF (Pan and Tilt Follow): Both pan and tilt axes follow the movement of the user's hand, but the roll axis does not.

FPV (Full Follow): Pan, tilt, and roll axes follow the movement of the user's hand.

Lock: All three axes do not follow the movement of the user's hand; the gimbal maintains the camera's direction.

FFW (Flash Follow): All three axes follow the movement of the user's hand at a high follow speed.

5.3 Button operation

• Power button: Long press to power on/off. Single tap to wake from sleep mode. Double tap to enter sleep mode.
• Joystick: Push to control the movement of the tilt and pan axes.
• F1 button: Double tap to enter/exit portrait mode. Long press to activate AI Tracking.
• F2 button: Single tap to lock/unlock the screen (on home page) or return to the home page (on other pages). Double tap to enter FFW mode.
• A/B button: Long press to mark the current position as A/B. Single tap to return to the marked position A/B. Can be used to mark axes/focus position.
• Mode button: Single tap to switch between PF, PTF, and FPV modes. Tap five times for horizon calibration.
• Shutter button: Press halfway to focus. Single tap (fully) to start/stop recording. Long press (fully) to take a photo.
• Trigger button: Double tap to recenter. Triple tap to enter/exit selfie mode (Pan axis turns 180°). Press and hold to lock mode (release to exit). Function can be customized via the app.
• FPV button: Single tap to enter/exit FPV mode.

Multifunction knob

• Turn: Controls the movement of the roll, tilt, and pan axes, or controls focus. Can also adjust parameters on the touch screen.
• Knob function switching button: Single tap to switch the control object for the 3 axes (Tilt/Pan/Roll). Long press to switch control options for the multifunction knob (axis movement, electronic focus, focus motor).

Note: Requires connection with camera. Refer to the camera compatibility list at https://www.feiyu-tech.com/feiyu-scorp-2/. More button function introductions are in the user manual.

5.4 Touch screen operation

Swipe from right to left: Joystick, gimbal, and more settings.

Swipe from left to right: Shooting parameters settings.

Swipe up: Multifunction knob settings.

To return to the previous menu, swipe to the right.

Motor power: Use auto tune to adjust motor power automatically, or adjust motor power for each axis manually.

Follow speed: Select different gimbal follow speed profiles, or custom follow speed.

6. Specifications

Product name: Feiyu SCORP 2 3-Axis Handheld Gimbal for Camera

Product model: FeiyuF2-2

Max. Tilt Range: +200° ~ -120°

Max. Roll Range: +245° ~ -75°

Max. Pan Range: 360°

Weight (Main body): About 1070g

Payload Capability: About 2500g (Well-balanced)

Battery life: 13 Hours

Battery: 2500mAh

Operating Voltage: 8.4V - 6.8V

Compatible Cameras: Sony, Canon, Nikon, Panasonic, etc. (For specific camera and lens compatibility, please refer to the official website's compatibility list.)

Accessories

• [1] USB 2.0 to Type-C x1
• [2] Type-C to Micro x1
• [3] Type-C to Type-C x1
• [4] Type-C to TRS2.5 x1
• [5] Type-C to Multi Sony shutter cable x1
• [6] Type-C to 2.5mm Panasonic shutter cable (DC2.5mm) x1
• [7] Type-C to TRS3.5 x1
• [8] Type-C to Mini x1
• [9] Tripod x1
• [10] Fixed plate x1
• [11] Slider x1
• [12] Quick release plate x1
• [13] Camera backing base x1
• [14] Lens holder x1
• [15] Lens holder screw x1
• [16] Camera fixed screw x3

Kit Version Additions:

• [17] ARRI Rosettes Expansion Accessory x1
• [18] Expandable module x1
• [19] Carbon Fiber Rod x1
• [20] Storage Bag x1

Notice

1. Make sure motor spinning is not blocked by external force when the product is powered on.
2. The product should NOT contact water or other liquids if it is not marked waterproof or splash-proof. Waterproof and splash-proof products should NOT contact seawater or other corrosive liquids.
3. DO NOT disassemble the product except for marked detachable parts. If you accidentally disassemble it and cause abnormal operation, it must be sent to FeiyuTech after-sales or an authorized service center for repair. The relevant costs will be borne by the user.
4. Prolonged continuous operation may cause the product's surface temperature to rise; please operate carefully.
5. DO NOT drop or strike the product. If the product is abnormal, contact Feiyu After-sales support.

Storage and Maintenance

1. Keep the product out of the reach of children and pets.
2. DO NOT leave the product near heat sources such as furnaces or heaters. DO NOT leave the product inside a vehicle on hot days.
3. Please store the product in a dry environment.
4. DO NOT overcharge or overuse the battery, as this can damage the battery core. If the product is not used for a long time, please charge it at least once a month.
5. Never use the product when the temperature is too high or too low.

FCC regulatory conformance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment.

RF Exposure: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

Warranty Card / 售后服务卡

Product Model: Feiyu SCORP 2

Serial Number:

Purchase Date:

Customer Name:

Customer Tel:

Customer Email:

Warranty:

1. Within one year from the date of selling, the product is malfunctioning under normal due to non-artificial reasons.
2. The malfunction of the product is not caused by artificial reasons such as unauthorized disassemble or conversion or addition.
3. The buyer is able to provide the certificate of maintenance service: the warranty card, the legitimate receipts, invoices, or screenshot of purchasing.

The followings cases are not included under the warranty:

1. Unable to provide legitimate receipt and warranty card with buyer's info.
2. The damage caused by human or irresistible factor.

More details about after-sales policy, please refer to after-sales page on website: https://www.feiyu-tech.com/service

Our company reserves the right of final interpretation on the above-mentioned after sales terms and limitations.

保修范围:

1. 自购买之日起,产品主体在1年内,产品在正常使用情况下出现非人为的性能故障。
2. 无擅自拆机、无擅自改装或加装产品、其它非人为引起的故障。
3. 可提供保修服务凭证:保修卡,正规发票,单据或购买截图。

以下情况不在保修范围内:

1. 不能提供正规购买凭证和填写详细信息的保修卡。
2. 人为或不可抗因素造成的损害。

更多保修细则以售后政策为准:https://www.feiyu-tech.cn/service

*本公司保留对上述售后条款和限制进行最终解释的权利。

QUALIFIED CERTIFICATE

Checker:

Production Date:

QC PASS

Manufactured by/Hergestellt von/Fabricant/Fabricado por/Produttore: Guilin Feiyu Technology Incorporated Company

制造商:桂林飞宇科技股份有限公司

Website/Website/Site Web/Sitio web/Sito web: www.feiyu-tech.com 网址:www.feiyu-tech.cn

E-mail/ 邮箱 /E-Mail/Courriel/Correo electrónico/E-mail: support@feiyu-tech.com

Tel/Telefon/Tél./Teléfono/Telefono: +86 773-2320865 电话:400-990-6118(仅限大陆地区拨打)